United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org
Rulings By Number
Rulings By Category
Tariff Numbers
faqs.org
>
Rulings and Tariffs Home
>
Tariff Numbers
> 7220.11.00 - 7302.90.00
7220.11.00 - Stainless steel, width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
7220.12.10 - Stainless steel, width 300m+ but less th/600mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
7220.12.50 - Stainless steel, width less th/300mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
7220.20.10 - Stainless steel, width 300+ but less th/600mm, cold-rolled flat-rolled products
7220.20.60 - Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/thickness o/1.25 mm
7220.20.70 - Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/ thickness of 0.25 mm but n/o 1.25 mm
7220.20.80 - Stainless razor blade steel, width less th/300mm, cold-rolled flat-rolled, w/thickness n/o 0.25 mm
7220.20.90 - Stainless steel (o/than razor blade steel), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
7220.90.00 - Stainless steel, width less th/600mm, flat-rolled products further worked than cold-rolled
7221.00.00 - Stainless steel, bars and rods in irregularly wound coils, hot-rolled
7222.11.00 - Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section
7222.19.00 - Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section
7222.20.00 - Stainless steel, bars and rods, not further worked than cold-formed or cold-finished, nesoi
7222.30.00 - Stainless steel, bars and rods, further worked than cold-formed or cold-finished, nesoi
7222.40.30 - Stainless steel, angles, shapes & sections, hot-rolled, not drilled/punched or otherwise advanced
7222.40.60 - Stainless steel, angles, shapes & sections, other than hot-rolled and not drilled/punched or otherwise advanced
7223.00.10 - Stainless steel, round wire
7223.00.50 - Stainless steel, flat wire
7223.00.90 - Stainless steel, wire (other than round or flat wire)
7224.10.00 - Alloy (o/than stainless) steel, ingots and other primary forms
7224.90.00 - Alloy (o/than stainless) steel, semifinished products
7225.11.00 - Alloy silicon electrical steel (grain-oriented), width 600mm+, flat-rolled products
7225.19.00 - Alloy silicon electrical steel (other than grain-oriented), width 600mm+, flat-rolled products
7225.20.00 - Alloy high-speed steel, width 600mm+, flat-rolled products
7225.30.10 - Alloy tool steel (o/than hi-speed), width 600m+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
7225.30.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
7225.30.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
7225.30.50 - Alloy tool steel (o/than hi-speed), width 600m+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
7225.30.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
7225.30.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
7225.40.10 - Alloy tool steel (o/than hi-speed), width 600m+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
7225.40.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
7225.40.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
7225.40.50 - Alloy tool steel (o/than hi-speed), width 600m+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
7225.40.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
7225.40.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
7225.50.10 - Alloy tool steel (o/th hi-speed), width 600mm+, cold-rolled flat-rolled products
7225.50.11 - Alloy tool steel, width 600mm+, cold-rolled flat-rolled products
7225.50.60 - Alloy steel (o/ than tool), width 600mm+, cold-rolled flat-rolled products, w/thickness 4.75 mm or more
7225.50.70 - Alloy heat-resisting steel, width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.50.80 - Alloy steel (o/th heat-resisting), width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.91.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc
7225.92.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically)
7225.99.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi
7226.11.10 - Alloy silicon electrical steel (grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.11.90 - Alloy silicon electrical steel (grain-oriented), width less th/300mm, flat-rolled products
7226.19.10 - Alloy silicon electrical steel (o/than grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.19.90 - Alloy silicon electrical steel (o/than grain-oriented), width less th/300mm, flat-rolled products
7226.20.00 - Alloy high-speed steel, width less th/600mm, flat-rolled products of high-speed steel
7226.91.05 - Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products
7226.91.15 - Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products
7226.91.25 - Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products
7226.91.50 - Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
7226.91.70 - Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.91.80 - Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.92.10 - Alloy tool steel (o/than hi-speed), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.30 - Alloy tool steel (o/than hi-speed), width less th/300mm, cold-rolled flat-rolled products
7226.92.50 - Alloy steel (o/than tool), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.70 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
7226.92.80 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness o/0.25 mm
7226.93.00 - Alloy steel, width less th/600mm, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc
7226.94.00 - Alloy steel, width less th/600mm, flat-rolled products further wrkd than cold-rolled, plated or coated with zinc o/than electrolytically
7226.99.00 - Alloy steel (n/plated or coated w/zinc), width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi
7226.99.01 - Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi
7227.10.00 - Alloy high-speed steel, bars and rods in irregularly wound coils, hmot-rolled
7227.20.00 - Alloy silico-manganese steel, bars and rods in irregularly wound coils, hot-rolled
7227.90.10 - Alloy tool steel (o/than hi-speed), bars & rods in irregular wound coils, hot-rolled, n/tempered, treated or partly manufactured
7227.90.20 - Alloy tool steel (o/than hi-speed), bars and rods in irregularly wound coils, hot-rolled, nesoi
7227.90.60 - Alloy steel (o/than hi-speed/silico-mang./tool) steel, bars and rods in irregularly wound coils, hot-rolled
7228.10.00 - Alloy high-speed steel, bars and rods, o/than hot-rolled and in irregularly wound coils
7228.20.10 - Alloy silico-manganese steel, bars and rods, not cold-formed, o/than hot-rolled and in irregularly wound coils
7228.20.50 - Alloy silico-manganese steel, bars and rods, cold formed, o/than hot-rolled and in irregularly wound coils
7228.30.20 - Alloy ball-bearing tool steel, bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.30.40 - Alloy chipper knife tool steel, bars and rods, not cold-formed & not further worked than hot-rolled, hot-drawn or extruded
7228.30.60 - Alloy tool steel (o/than ball-bearing/chipper knife), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.30.80 - Alloy steel (o/than hi-speed, silico-mang./tool), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.40.00 - Alloy steel, bars and rods, not further worked than forged
7228.50.10 - Alloy tool steel (o/than hi-speed), bars and rods, not further worked than cold-formed or cold-finished
7228.50.50 - Alloy steel (o/than tool), bars and rods, not further worked than cold-formed or cold-finished
7228.60.10 - Alloy tool steel (o/than hi-speed), bars and rods, further worked than hot-rolled, forged, cold-formed or cold-finished
7228.60.60 - Alloy steel (o/than tool), bars and rods, further worked than hot-rolled, forged but not cold-formed
7228.60.80 - Alloy steel (o/than tool), bars and rods, cold-formed
7228.70.30 - Alloy steel, angles, shapes and sections, hot-rolled & not drilled/not punched and not otherwise advanced
7228.70.60 - Alloy steel, angles, shapes and sections, o/than hot-rolled & not drilled/punced and not otherwise advanced
7228.80.00 - Alloy steel hollow drill bars and rods
7229.10.00 - Alloy high-speed steel, wire
7229.20.00 - Alloy silico-manganese steel, wire
7229.90.05 - Alloy high-speed steel, wire
7229.90.10 - Alloy steel (o/than hi-speed/silico-mang.), flat wire
7229.90.50 - Alloy steel (o/than hi-speed/silico-mang.), round wire
7229.90.90 - Alloy steel (o/than hi-speed/silico-mang.), wire (o/than flat or round wire)
7301.10.00 - Iron or steel sheet piling, whether or not drilled, punched or made from assembled elements
7301.20.10 - Iron or nonalloy steel, angles, shapes and sections, welded
7301.20.50 - Alloy steel, angles, shapes and sections of alloy steel, welded
7302.10.10 - Iron or nonalloy steel, rails for railway or tramway tracks
7302.10.50 - Alloy steel, rails for railway or tramway tracks
7302.20.00 - Iron or steel, sleepers (cross-ties) for railway or tramway track construction
7302.30.00 - Iron or steel, switch blades, crossing frogs, point rods and other crossing pieces, for jointing or fixing rails
7302.40.00 - Iron or steel, fish plates and sole plates for jointing or fixing rails
7302.90.00 - Iron or steel, railway or tramway track construction material nesoi, including check rails, rack rails, chairs, chair wedges, rail clips