United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2006 NY Rulings > NY M83713 - NY M83764 > NY M83723

Previous Ruling Next Ruling
NY M83723





May 30, 2006

CLA-2-62:RR:NC:TA:N3:358 M83723

CATEGORY: CLASSIFICATION

Ms. Rhoda A. Salus
Sandler, Travis & Rosenberg, P. A.
The Waterford
5200 Blue Lagoon Drive
Miami, FL 33126-2022

RE: Classification and country of origin determination for two pairs of girl’s woven pants; 19 CFR 102.21(c)(4); most important assembly.

Dear Ms. Salus:

This is in reply to your letter dated May 19, 2006, on behalf of Nanjing USA Inc., concerning a classification and country of origin determination for girl’s woven pants that will be imported into the United States.

FACTS:

The submitted sample, style FGG061DK, is a pair of girls pants constructed from 98% cotton, 2% spandex blue denim fabric. The garment has a flat waistband with five belt loops, a fly front opening with a zipper closure, a metal button on the waistband, two front scoop pockets, a front coin pocket, two rear patch pockets, a rear yoke, and hemmed legs.

The submitted sample, style FGG0610X, is a pair of girls pants constructed from 98% cotton, 2% spandex, khaki colored twill fabric. The garment has a flat front waistband, an elasticized rear waistband, five waistband belt loops, a fly front opening with a zipper closure, a metal button on the waistband, two front scoop pockets, a front coin pocket, two rear patch pockets, a rear yoke, and hemmed legs.

Both styles are sized for girls 4 to 6X and 7 to 16, regular and slim.

The manufacturing operations will occur in China (Country “A”) and Malaysia (Country “B”). Your client proposes to partially assemble and wash the garments in China before shipment to Malaysia for final assembly into finished garments. However, in order to maintain proper alignment of the fabric during the washing process, it is necessary to temporarily join the inseams and front rise prior to washing. Your client will use either a plastic staple (Scenario 1) or a temporary chain stitch (Scenario 2) as a temporary joining method. The plastic staple or chain stitch will be removed prior to shipment Malaysia. You have provided a sample of the partially assembled garment showing the temporary joining, as well as a sample of the washed and partially assembled garment as it leaves China, and a sample of the finished garment as it will be imported from Malaysia into the United States. Your samples will be returned, as requested.

The manufacturing operations are as follows:

SCENARIO 1:

Fabric is cut into components
The pocket panels are machine embroidered The left and right halves of the back yoke are sewn together The left and right rear panels are sewn together forming the lower back rise The back yoke component is sewn to back panels, completing the back rise Patch pockets are sewn onto back panels
The left fly and zipper are attached to the left front panel The right fly and zipper are only attached at the waistband Front and back right panels are overlock stitched on bottom and inseams The coin pocket and right front pocket facing and lining are formed and attached The left front pocket facing and lining are formed and attached The waistband and belt loops are joined to the main body Outer side seam of leg panels are joined
The inseams are stapled together in order to keep the component parts properly aligned Button hole is made and stud button is attached to waistband The garments are washed to achieve softer hand and color The staples are removed from the garment
The unfinished garments are packed and sent to Malaysia for assembly

The right zipper is sewn to the right front panel The front rise is sewn joining the front panels The inseams of the leg panels are joined using a felling or Serge machine Legs are hemmed
Trim, press, ticket tag
Finish, packed for export

SCENARIO 2:

Fabric is cut into components
The pocket panels are machine embroidered The left and right halves of the back yoke are sewn together The left and right rear panels are sewn together forming the lower back rise The back yoke component is sewn to back panels, completing the back rise Patch pockets are sewn onto back panels
The left fly and zipper are attached to the left front panel The right fly and zipper are only attached at the waistband Front and back right panels are overlock stitched on bottom and inseams The coin pocket and right front pocket facing and lining are formed and attached The left front pocket facing and lining are formed and attached The waistband and belt loops are joined to the main body Outer side seam of leg panels are joined
The inseams are temporarily chain stitched together in order to keep the component parts properly aligned Button hole is made and stud button is attached to waistband The garments are washed to achieve softer hand and color The temporary chain stitching is removed by pulling the bottom threads from the garment The unfinished garments are packed and sent to Malaysia for assembly

The right zipper is sewn to the right front panel The front rise is sewn joining the front panels The inseams of the leg panels are joined using a felling or Serge machine Legs are hemmed
Trim, press, ticket tag
Finish, packed for export

ISSUE:

What are the classification and country of origin of the subject merchandise?

CLASSIFICATION:

The applicable subheading for the pants style, FGG061DK, is 6204.62.4040, Harmonized Tariff Schedule of the United States, (HTSUS), which provides for: women’s or girls’ trousers . . . of cotton: other: other: trousers and breeches: girls’: blue denim, other. The applicable subheading for the pants style, FGG0610X, is in 6204.62.4050, Harmonized Tariff Schedule of the United States, (HTSUS), which provides for: women’s or girls’ trousers . . . of cotton: other: other: trousers and breeches: girls’: other, other. The general rate of duty is 16.6% ad valorem.

Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on the World Wide Web at http://www.usitc.gov/tata/hts/.

Girls’ cotton pants fall within textile category designation 348. Quota and visa status are the result of international agreements that are subject to frequent renegotiations and changes. To obtain the most current information as to whether quota and visa requirements apply to this merchandise, we suggest that you check, close to the time of shipment, the “Textile Status Report for Absolute Quotas” available at our web site at www.cpb.gov. In addition, you will find current information on textile import quotas, textile safeguard actions and related issues at the web site of the Office of Textiles and Apparel, at otexa.ita.doc.gov.

COUNTRY OF ORIGIN - LAW AND ANALYSIS:

Section 334 of the Uruguay Round Agreements Act (codified at 19 U.S.C. 3592), enacted on December 8, 1994, provided rules of origin for textiles and apparel entered, or withdrawn from warehouse for consumption, on and after July 1, 1996. Section 102.21, Customs Regulations (19 C.F.R. 102.21), published September 5, 1995, in the Federal Register, implements Section 334 (60 FR 46188). Section 334 of the URAA was amended by Section 405 of the Trade and Development Act of 2000, enacted on May 18, 2000, and accordingly, section 102.21 was amended (68 Fed. Reg. 8711). Thus, the country of origin of a textile or apparel product shall be determined by the sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.

Paragraph (c)(1) states, "The country of origin of a textile or apparel product is the single country, territory, or insular possession in which the good was wholly obtained or produced." As the subject merchandise is not wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section 102.21 is inapplicable.

Paragraph (c)(2) states that "Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) of this section, the country of origin of the good is the single country, territory, or insular possession in which each of the foreign materials incorporated in that good underwent an applicable change in tariff classification, and/or met any other requirement, specified for the good in paragraph (e) of this section."

Paragraph (e) in pertinent part states that "The following rules shall apply for purposes of determining the country of origin of a textile or apparel product under paragraph (c)(2) of this section":

HTSUS Tariff shift and/or other requirements

6201-6208 If the good consists of two or more component parts, a change to an assembled good of heading 6201 through 6208 from unassembled components, provided that the change is the result of the good being wholly assembled in a single country, territory, or insular possession.

Although the garment consists of two or more component parts, it is not wholly assembled in a single country, territory or insular possession. Accordingly, as the terms of the tariff shift are not met, Section 102.21 (c)(2) is inapplicable.

Section 102.21 (c)(3) states that, “Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) or (2) of this section”:

If the good was knit to shape, the country of origin of the good is the single country, territory or insular possession in which the good was knit; or

Except for goods of heading 5609, 5807, 5811, 6213, 6214, 6301 through 6306, and 6308, and subheadings 6209.20.5040, 6307.10, 6307.90, and 9404.90, if the good was not knit to shape and the good was wholly assembled in a single country, territory or insular possession, the country of origin of the good is the country, territory or insular possession in which the good was wholly assembled.

Since the garment is neither knit nor wholly assembled in a single country, Section 102.21 (c)(3) is inapplicable.

Section 102.21 (c)(4) states, “Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1), (2) or (3) of this section, the country of origin of the good is the single country, territory or insular possession in which the most important assembly or manufacturing process occurred.”

In the case of the subject merchandise, in Scenario 1 and Scenario 2, the assembly processes in Malaysia which consist of sewing the right zipper to the right front panel, sewing the front rise to join the front panels and sewing the leg panel inseams constitute the most important assembly processes.

Accordingly, under Section 102.21 (c)(4), the country of origin of the submitted garment in both Scenario 1 and Scenario 2 is Malaysia, the country in which the most important assembly processes occur.

HOLDING:

The country of origin of the submitted garment in Scenario 1 and Scenario 2 is Malaysia. Based upon international textile trade agreements, products of Malaysia are not presently subject to visa requirements or quota restraints.

The holding set forth above applies only to the specific factual situation and merchandise identified in the ruling request. This position is clearly set forth in section 19 CFR 177.9(b)(1). This sections states that a ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect.

This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). Should it be subsequently determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished, this may affect the determination of country of origin. Accordingly, if there is any change in the facts submitted to Customs, it is recommended that a new ruling request be submitted in accordance with 19 CFR 177.2.

A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Bruce Kirschner at 646-733-3048.

Sincerely,

Robert B. Swierupski
Director,
National Commodity

Previous Ruling Next Ruling

See also: