United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2003 HQ Rulings > HQ 229963 - HQ 548239 > HQ 547859

Previous Ruling Next Ruling
HQ 547859





November 26, 2001

RR:IT:VA 547859 DCC

CATEGORY: VALUATION

Port Director
U.S. Customs Service
40 South Gay Street
Baltimore, Maryland 21202

RE: Application for Further Review of Protest No. 1303-00-100105; Transaction Value; Nissho Iwai; Multi-tiered Transactions

Dear Port Director:

This is in response to an Application for Further Review (“AFR”) of Protest No. 1303-00-100105, dated May 2, 2000, filed by Wilmer, Cutler & Pickering on behalf of Interlink Metals, Inc. of New York, New York (“Interlink” or the “Importer”).

Previously, on August 18, 1999, we issued a response to a request for internal advice regarding imports of titanium sponge imported by Interlink. See Headquarters Letter (“HRL”) 547035. Although HRL 547035 addressed the valuation of the same merchandise imported by the same importer, the sales transaction in that case was structured differently and occurred under different conditions. Therefore, HRL 547035 does not address directly the transactions which are the subject of this protest.

In addition, we met with an Interlink representative and Counsel on September 6, 2001, and received three supplemental submissions from Interlink, dated September 5, 26, and October 9, 2001. We also received a request for confidential treatment for business proprietary information, dated February 9, 2001, Pursuant to Customs Regulations § 177.2(b)(7) (19 C.F.R. § 177.2(b)(7)), we determine that the information Counsel designated proprietary should be treated as confidential. Accordingly, that information has been bracketed in this letter and will be redacted from any public versions.

FACTS:

The merchandise at issue is titanium sponge imported by Interlink pursuant to a multi-tiered sales transaction and entered into the United States on September 1, 1999. The relevant transactions involve a middleman, [ 

The Importer entered the merchandise based on the sales price between the Middleman and the Manufacturer. However, on January 14, 2000, your office informed the Importer that pursuant to HRL 547035, you would reappraise the merchandise based on the transaction value between the Importer and the Middleman. On February 4, 2000, Customs liquidated the merchandise at the higher value.

Interlink disputes your appraisal method and asserts that the facts of the present case are distinguished from the proposed transaction covered by HRL 547035 and therefore the merchandise in the present case should be appraised based on the basis of the Manufacturer’s sales price. According to the Interlink’s submission, the Manufacturer sold titanium sponge to the Middleman, which resold the material to Interlink, which resold it to the Customer.

            ] from the Customer for titanium sponge dated February 19, 1999. The Customer’s purchase order specified two grades of the material: TG 90 and TG 100; and three dimensions: 2 x 12 mm, 12 x 25 mm, and 12 x 70 mm. Counsel notes the purchase order instructs that the titanium sponge meet the Customer’s specification, “[                  ],” and “[                                                                    ].” The second page of Customer’s purchase order notes that: “Interlink may offer this spogne [sic] to other customers and reduce the amount accordingly, with [   ] prior approval.” Counsel also provided an affidavit from the president of Interlink that states that the company’s specifications for titanium sponge are company specific, proprietary, and exclusive to the Customer.

On April 19, 1999, the Importer issued a sales contract [                                ] to the Customer confirming the price and quantity terms of the Customer’s purchase order. Although the Customer’s purchase order and the Importer’s sales contract correspond with regard to the dimensions of material, there is a discrepancy in the grade of titanium in the two documents. The purchase order states two grades (TG 90 and TG 100) but the sales contract states three grades (TG 90, TG 100, and TG 110).

Also on June 16, 1999, the Middleman issued a sales contract [                    ] to the Importer for [            ] metric tons of titanium sponge. Again, there is a discrepancy between the Importer’s purchase order and the Middleman’s sales contract in the grade of the material ordered. The Importer’s purchase order states two grades of titanium sponge (TG 90 and TG 100), while the Middleman’s sales contract specifies three (TG 90, TG 100, and TG 110). The Middleman’s sales contract does not state the dimension of material ordered.

On June 20, 1999, the Middleman issued a purchase order [                     ] to the Manufacturer. In this Middleman/Manufacturer transaction, the three grades of material stated in the Middleman’s purchase order to the Manufacturer do not fully correspond to the grades stated in the Middleman’s June 16 sales contract (TG 90, TG 100, and TG 110). The Middleman’s purchase order did not specify the size of the material.

Also on June 20, 1999, the Manufacturer prepared a sales contract [                                   ], for the same quantity of titanium sponge. Again we note a discrepancy in the documents underlying the Middleman/Manufacturer transaction. According to the addendum to the Manufacturer’s sales contract, there are three stated grades for the titanium sponge. The Middleman’s June 20 purchase order, however, specified only two grades (TG 90 and TG 100). In addition, pursuant to the addendum to the Manufacturer’s sales contract, the quality of the titanium sponge was in compliance with the Russian state standard “GOST [                      ].” The terms of delivery on the Manufacturer’s sales contract were [                                 ]. The Manufacturer’s sales contract stated three sizes of material (2 x 12 mm, 12 x 25 mm, and 12 x 70 mm).

All the purchase orders and sales contracts between the Customer, Importer, Middleman, and Manufacturer reference the Customer’s original purchase order number. Although the Customer’s and Middleman’s purchase orders reference the Customer’s specification [                 ] or [                ], none of the other documents cite these specifications.

Counsel also provided invoices from the Middleman and the Manufacturer. The undated Manufacturer’s invoice [                                ] was for [            ] metric tons of titanium sponge. The grade and size information on the Manufacturer’s invoice does not correspond to the same information on the Manufacturer’s sales contract. The Manufacturer’s invoice specifies two grades and sizes of material while the Manufacturer’s sales contract states three grades and sizes.

On August 8, 1999, the Middleman issued an invoice [                   ] to the Importer for [           ] metric tons of titanium sponge. Again, we note a discrepancy in the grade of the material. According to the Middleman’s invoice, the Middleman sold two grades of titanium sponge (TG 90 and TG 100). The Middleman’s June 16 sales contract, however, states three grades of material (TG 90, TG 100, and TG 110).

Counsel also provided a copy of the Customer’s specifications for titanium sponge [                  ], dated April 4, 1994, and revised October 27, 1999. The specifications detail the size, chemistry, and the methods of processing, inspection and certification.

ISSUE:

Whether the transactions between the Manufacturer and the Middleman consist of a bona fide sale conducted at arm’s length, wherein the merchandise was clearly destined for the United States, allowing transaction value to be based on the Manufacturer’s sales price.

LAW AND ANALYSIS:

Although many of the facts are similar—including the subject merchandise, the Customer, the Manufacturer, the Importer and one of the intermediaries, and the terms of delivery—Counsel argues that the facts in HRL 547035 are distinguished from the facts in the present case. In HRL 547035, Interlink imported titanium sponge through two middlemen: the Middleman and [                                               ]. In the present case, however, the Middleman was the only intermediary. In addition, in HRL 547035, Interlink did not disclose to the Manufacturer that the titanium sponge was destined for the United States because the merchandise was subject to an antidumping duty order. On August 31, 1998, the U.S. Department of Commerce revoked the antidumping duty order for titanium sponge from Russia. Consequently, in the present case, Interlink was able to disclose to the Manufacturer that the titanium sponge was destined for the United States. Because the facts and circumstances of the present case differ from those in HRL 547035, including the structure of the transaction, we determine that the advice rendered in that case does not address directly the issues raised in the present case.

Counsel also argues that the Manufacturer knew that the titanium sponge was destined for the United States because of the requirement that the material must meet the Customer’s specifications. In addition, Counsel argues that the references to the Customer’s and Interlink’s purchase order numbers on all of the commercial documents demonstrates that the Manufacturer knew that the merchandise was destined for the United States.

Transaction Value

Transaction value, the preferred method of appraisement, is defined in section 402(b)(1) of the Tariff Act of 1930, as amended by the Trade Agreements Act of 1979 (19 U.S.C. 1401a(b); “TAA”) as the “price actually paid or payable for merchandise when sold for exportation to the United States . . . .”

Merchandise imported into the United States is appraised in accordance with section 402 of the Tariff Act of 1930, as amended by the Trade Agreements Act of 1979 (TAA; codified at 19 U.S.C. §1401a). The primary basis of appraisement under the TAA is transaction value, which is defined as “the price actually paid or payable for the imported merchandise when sold for exportation to the United States,” plus certain enumerated additions thereto to the extent they are not otherwise included in the price actually paid or payable. 19 U.S.C. §1401a(b)(1).

As a general matter, Customs assumes that the price the importer paid is the basis of transaction value. As Customs explained in a General Notice entitled, “Determining Transaction Value in Multi-tiered Transactions,” T.D. 96-87, 30/31 Cust. Bull. 52/1, January 2, 1997:

Customs presumes that the price paid by the importer is the basis of transaction value and the burden is on the importer to rebut this presumption. In order to rebut this presumption, in accordance with the Nissho Iwai standard, the importer must prove that at the time the middleman purchased, or contracted to purchase, the goods were “clearly destined for the United States” and the manufacturer (or the seller) and middleman dealt with each other at “arm’s length.”

Clearly Destined for the United States

The U.S. Court of Appeals for the Federal Circuit has established that for merchandise imported pursuant to a three-tiered transaction to be appraised on the basis of the manufacturer-middleman sale, the merchandise must be clearly destined for export to the United States. In Nissho Iwai American Corp. v. United States, 982 F.2d 505 (Fed. Cir. 1992), the Court of Appeals reviewed the standard for determining transaction value when there is more than one sale which may be considered as being a sale for exportation to the United States. In so doing, the court reaffirmed the rationale established in E.C. McAfee Co. v. United States, 842 F.2d 314 (Fed. Cir. 1988), that the manufacturer’s price, rather than the middleman’s price, is valid so long as the transaction between the manufacturer and the middleman falls within the statutory provision for valuation. Nissho Iwai, 982 F.2d at 511. In reaffirming the McAfee rationale, the court stated that in a three-tiered distribution system, “the manufacturer’s price constitutes a viable transaction value when the goods are clearly destined for export to the United States and when the manufacturer and the middleman deal with each other at arm’s length, in the absence of any non-market influences that affect the legitimacy of the sales price.” Id. at 509. See also, Synergy Sport International, Ltd. v. United States, 17 CIT 18 (1993).

In support of Interlink’s contention that the Manufacturer’s sales price is the appropriate basis for determining the transaction value, Counsel argues that the subject merchandise was clearly destined for the United States at the time of export to the Middleman. Counsel argues the references to the Customer’s specification demonstrate that the Manufacturer and the Middleman both knew that the merchandise was a sale for export to the United States. Counsel also maintains, and the Interlink affidavit states, that the Customer’s specifications are proprietary and are not used by any other company.

Counsel also claims that the Manufacturer knew of the sale to the Importer and Customer because the Manufacturer was directly involved in the negotiations of the sales contract between the Customer and the Importer. In support of this assertion the Interlink affidavit states that the Customer engaged in direct negotiations with the Middleman and the Manufacturer.

Furthermore, Counsel asserts that the Customer ordered titanium sponge meeting the Customer’s exclusive specifications. In support of this assertion, Counsel provided an affidavit from the president of the importing company. The affidavit states that the Customer’s specifications are specific and proprietary to the Customer.

Counsel’s claim that the titanium sponge could only be sold to the Customer is not supported by the facts. First, reference to the Customer’s specifications is not conclusive evidence that the titanium was destined to the United States. Significantly, the metallurgical composition specifications of the GOST [                   ] standard differ from the Customer’s specifications. For three of the seven mineral impurities covered by the GOST [                  ] standard, including [                                           ], which are not contained in the GOST standard. It is therefore not clear that the titanium sponge sold by the Manufacturer in fact met the Customer’s specifications. Moreover, we note that the Customer’s specifications provided by Counsel were revised on October 27, 1999—after the date the Importer entered the subject merchandise.

Furthermore, the Customer specification is not referenced in the Middleman’s sales contract, the Manufacturer’s sales contract, the Manufacturer’s invoice, or the Middleman’s invoice. Although none of these documents mentions the Customer’s specification, they do specify the Customer’s size and grade requirements. In addition, the addendum to the Manufacturer’s sales contract notes only that the quality of the material was according to the Russian state standard “GOST [           

Moreover, the Customer’s purchase order states that the titanium sponge ordered by the Customer may be sold to other customers. Counsel asserts that this statement is irrelevant to the determination of whether the merchandise qualifies for Nissho Iwai treatment. Despite the language of the statement, Counsel claims that there is no indication that either the Manufacturer or the Middleman intended to ship the merchandise to any party other than the Customer. We disagree. The Customer’s purchase order plainly states that the Importer may sell the titanium to other customers and accordingly reduce the amount shipped to the Customer. Accordingly, we conclude that the titanium sponge that meets the Customer’s specifications could be sold to other customers and therefore was not manufactured exclusively for, nor sold exclusively to, the Customer.

Furthermore, as detailed above, many of the commercial documents underlying the subject transaction contain discrepancies in the grade and size of the titanium. Counsel explains that the Customer orally amended its purchase order to include the third grade of titanium sponge (TG 110), and claims that this amendment was confirmed in the Importer’s April 19, 1999 sales contract, which references all three grades of material. After the Importer’s sales contract was prepared, however, four of the commercial documents reference just two of the specified grades of titanium sponge. In particular, the Importer’s purchase order, the Middleman’s purchase order, the Manufacturer’s undated invoice, and the Middleman’s invoice all specify only two of the three grades of titanium sponge allegedly ordered by the Customer.

With regard to discrepancies in the size ranges, Counsel asserts that the Customer purchase order, the Importer sales contract, and the Manufacturer sales contract all state that the relevant size ranges for the sponge are 2 x 12 mm, 12 x 25 mm, and 12 x 70 mm. Counsel further notes that these are standard size ranges for titanium sponge. Counsel does not explain, however, why only two of the three size ranges are specified in two other commercial documents. In particular, the Importer’s June 16, 1999 purchase order, and the Middleman’s August 8, 1999 invoice state just the two of the three size ranges.

Moreover, the method of shipment undermines Counsel’s claim that the merchandise was clearly destined for the United States. Prior to the transaction underlying this protest, the Manufacturer exported the titanium to [           ], an unrelated company. At the end of 1998, the Manufacture reacquired the titanium which was warehoused in [                               ] from [           ]. Counsel states that the merchandise was shipped to [           ] where it is warehoused until shipment to the United States pursuant to the Customer’s installment delivery schedule. The fact that the merchandise was shipped to [           ] prior to the sale to the Middleman is an important factor in this determination. See HRL 547035, dated August 18, 1999. The export of titanium to the warehouse in [           ] before the sale to the Middleman raises the possibility of diversion to a third party, especially in light of the fact that the Customer’s purchase order states that Interlink may sell the merchandise to other customers.

Finally, Counsel provided insufficient documentation to determine whether all of the titanium sponge shipped by the Manufacturer was delivered to the Importer. As noted above, the Manufacturer invoiced the Middleman for [           ] metric tons of merchandise but there is only one invoice from Middleman to the Importer for [           ] metric tons. Therefore, it is not clear whether the remaining [           ] metric tons of titanium sponge shipped to the Middleman were in fact delivered to the Importer.

With regard to the sale between the Manufacturer and the Middleman, we find insufficient evidence to determine that the subject merchandise was clearly destined for the United States. Although Interlink was designated as the consignee on the Importer’s purchase order, the Manufacturer’s sales contract and invoice make no reference to the Importer or to the United States as the ultimate destination of the merchandise. In the absence of convincing evidence that the titanium sponge was clearly destined for the United States we do not reach the question of whether there was an arm’s length sale between the Manufacture and the Middleman.

In order to appraise the merchandise on the basis of the Manufacturer’s sales price, the Protestant must present sufficient evidence that the titanium sponge was clearly destined for exportation to the United States. Based on the evidence submitted, we determine that there exists a possibility of diversion and that the merchandise, therefore, is not clearly destined for the United States at the time of the Importer’s purchases. Therefore, the Protestant failed to rebut the presumption that transaction value should be based on the price paid by the Importer.

HOLDING:

Based on the information submitted, we find that there exists a possibility of diversion and that the merchandise from the Manufacturer was not clearly destined for the United States at the time of sale. Consequently, transaction value cannot be based on the sale between the Manufacturer and the Middleman. We conclude, therefore, that transaction value should be based on the sales between the Middleman and the Importer.

The protest should be denied. In accordance with Section 3A(11)(b) of Customs Directive 099 3550-065, dated August 4, 1993, you should mail this decision, together with the Customs Form 19, to the protestant no later than 60 days from the date of this letter. Any reliquidation of the entry or entries in accordance with this decision must be accomplished prior to mailing this decision.

Sixty days from the date of this decision, the Office of Regulations & Rulings will make the decision available to Customs personnel, and to the public on the Customs Home Page on the World Wide Web at www.customs.ustreas.gov, by means of the Freedom of Information Act, and other methods of public distribution.

Sincerely,

Virginia L. Brown
Chief, Value Branch

Previous Ruling Next Ruling