Network Working Group H. Schulzrinne
Request for Comments: 4480 Columbia U.
Category: Standards Track V. Gurbani
Lucent
P. Kyzivat
J. Rosenberg
Cisco
July 2006
RPID: Rich Presence Extensions to the
Presence Information Data Format (PIDF)
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The Presence Information Data Format (PIDF) defines a basic format
for representing presence information for a presentity. This format
defines a textual note, an indication of availability (open or
closed) and a Uniform Resource Identifier (URI) for communication.
The Rich Presence Information Data format (RPID) described here is an
extension that adds optional elements to the Presence Information
Data Format (PIDF). These extensions provide additional information
about the presentity and its contacts. The information is designed
so that much of it can be derived automatically, e.g., from calendar
files or user activity.
This extension includes information about what the person is doing, a
grouping identifier for a tuple, when a service or device was last
used, the type of place a person is in, what media communications
might remain private, the relationship of a service tuple to another
presentity, the person's mood, the time zone it is located in, the
type of service it offers, an icon reflecting the presentity's
status, and the overall role of the presentity.
These extensions include presence information for persons, services
(tuples), and devices.
Table of Contents
1. Introduction ....................................................2
2. Terminology and Conventions .....................................4
3. RPID Elements ...................................................4
3.1. Overview ...................................................4
3.2. Activities Element .........................................7
3.3. Class Element .............................................10
3.4. Device Identifier .........................................10
3.5. Mood Element ..............................................10
3.6. Place-is Element ..........................................12
3.7. Place-type Element ........................................13
3.8. Privacy Element ...........................................14
3.9. Relationship Element ......................................15
3.10. Service Class ............................................15
3.11. Sphere Element ...........................................16
3.12. Status-Icon Element ......................................16
3.13. Time Offset ..............................................17
3.14. User-Input Element .......................................17
4. Example ........................................................18
5. XML Schema Definitions .........................................20
5.1. urn:ietf:params:xml:ns:pidf:rpid ..........................20
6. Extending RPID .................................................30
7. IANA Considerations ............................................31
7.1. URN Sub-Namespace Registration for ........................31
'urn:ietf:params:xml:ns:pidf:rpid'
7.2. Schema Registration for Schema ............................32
'urn:ietf:params:xml:ns:pidf:status:rpid'
8. Internationalization Considerations ............................32
9. Security Considerations ........................................32
10. References ....................................................33
10.1. Normative References .....................................33
10.2. Informative References ...................................34
Appendix A. Acknowledgements .....................................35
1. Introduction
The Presence Information Data Format (PIDF) definition [8] describes
a basic presence information data format, encoded as an Extensible
Markup Language (XML) [9] (SCHEMA-1 [10]) (SCHEMA-2 [11]), for
exchanging presence information in systems compliant with the common
model for presence and instant messaging [5]. It consists of a
<presence> root element, zero or more <tuple> elements carrying
presence information including a Uniform Resource Identifier (URI)
for communication, zero or more <note> elements, and zero or more
extension elements from other name spaces. Each tuple defines a
basic status of either "open" or "closed".
However, it is frequently useful to convey additional information
about a user that needs to be interpreted by an automata, and is
therefore not appropriate to be placed in the <note> element of the
PIDF document, which is typically intended for the human observer.
Therefore, this specification defines extensions to the PIDF document
format for conveying richer presence information. Generally, the
extensions have been chosen to provide features common in existing
presence systems at the time of writing, in addition to elements that
could readily be derived automatically from existing sources of
presence, such as calendaring systems or communication devices, or
sources describing the user's current physical environment.
The presence data model [16] defines the concepts of service, device,
and person as the data elements that are used to model the state of a
presentity. (The term "presentity" is defined in RFC 2778 [5] and
abbreviates presence entity. A presentity provides presence
information to a presence service.) Services are encoded using the
<tuple> element, defined in PIDF; devices and persons are represented
by the <device> and <person> XML elements, respectively, defined in
the data model [16]. However, neither PIDF nor the data model
defines presence attributes beyond the <basic> status element.
This specification defines additional presence attributes to describe
person, service, and device data elements, summarized as "Rich
Presence Information Data format for presence" (RPID). These
attributes are specified by XML elements that extend the PIDF <tuple>
element and the <device> and <person> elements defined in the data
model.
This extension has two main goals:
1. Provide rich presence information that is at least as powerful as
common commercial presence systems. Such feature-parity
simplifies transition to systems complying with the Common
Profile for Instant Messaging (CPIM) [14], both in terms of user
acceptance and protocol conversion.
2. Maintain backward-compatibility with PIDF, so that PIDF-only
watchers and gateways can continue to function properly,
naturally without access to the functionality described here.
We make no assumptions as to how the information in the RPID elements
is generated. Experience has shown that users are not always
diligent about updating their presence status. Thus, we want to make
it as easy as possible to derive RPID information from other
information sources, such as personal calendars, the status of
communication devices such as telephones, typing activity, and
physical presence detectors as commonly found in energy-management
systems.
Many of the elements correspond to data commonly found in personal
calendars. Thus, we attempted to align some of the extensions with
the usage found in calendar formats such as iCal [13].
The information in a presence document can be generated by a single
entity or can be composed from information published by multiple
entities.
Note that PIDF documents and this extension can be used in two
different contexts, namely, by the presentity to publish its presence
status and by the presence server to notify some set of watchers.
The presence server MAY compose, translate, or filter the published
presence state before delivering customized presence information to
the watcher. For example, it may merge presence information from
multiple presence user agents, remove whole elements, translate
values in elements, or remove information from elements. Mechanisms
that filter calls and other communications to the presentity can
subscribe to this presence information just like a regular watcher
and in turn generate automated rules, such as scripts [15], that
govern the actual communications behavior of the presentity. Details
are described in the data model document.
Since RPID is a PIDF XML document, it also uses the content type
application/pidf+xml.
2. Terminology and Conventions
This memo makes use of the vocabulary defined in the IMPP model
document [5]. Terms such as CLOSED, INSTANT MESSAGE, OPEN, PRESENCE
SERVICE, PRESENTITY, WATCHER, and WATCHER USER AGENT in the memo are
used in the same meaning as defined therein.
The key words MUST, MUST NOT, REQUIRED, SHOULD, SHOULD NOT,
RECOMMENDED, MAY, and OPTIONAL in this document are to be interpreted
as described in BCP 14, RFC 2119 [1].
3. RPID Elements
3.1. Overview
Some of the RPID elements describe services, some devices, and some
the person. As such, they either extend <tuple>, <device>, or
<person>, respectively. Below, we summarize the RPID elements. The
next sections will then provide more detailed descriptions.
activities: The <activities> status element enumerates what the
person is doing.
class: An identifier that groups similar person elements, devices,
or services.
deviceID: A device identifier in a tuple references a <device>
element, indicating that this device contributes to the service
described by the tuple.
mood: The <mood> status element indicates the mood of the person.
place-is: The <place-is> status element reports on the properties of
the place the presentity is currently at, such as the levels of
light and noise.
place-type: The <place-type> status elements reports the type of
place the person is located in, such as 'classroom' or 'home'.
privacy: The <privacy> element distinguishes whether the
communication service is likely to be observable by other parties.
relationship: When a service is likely to reach a user besides the
person associated with the presentity, the relationship indicates
how that user relates to the person.
service-class: The <service-class> element describes whether the
service is delivered electronically, is a postal or delivery
service, or describes in-person communications.
sphere: The <sphere> element characterizes the overall current role
of the presentity.
status-icon: The <status-icon> element depicts the current status of
the person or service.
time-offset: The <time-offset> status element quantifies the time
zone the person is in, expressed as the number of minutes away
from UTC.
user-input: The <user-input> element records the user-input or usage
state of the service or device, based on human user input.
The 'From/until?' column in Table 1 indicates by an 'x' that the
element can take 'from' and 'until' attributes. An 'x' in the
'Note?' column marks elements that can include a <note> element. The
usage of these elements within the <person>, <tuple>, and <device>
elements is shown in columns 4 through 6. An 'x' in the respective
column indicates that the RPID element MAY appear as a child of that
element.
+-----------------+------------+------+----------+---------+----------+
| Element | From/until | Note | <person> | <tuple> | <device> |
| | ? | ? | | | |
+-----------------+------------+------+----------+---------+----------+
| <activities> | x | x | x | | |
| <class> | | | x | x | x |
| <deviceID> | | | | x | |
| <mood> | x | x | x | | |
| <place-is> | x | x | x | | |
| <place-type> | x | x | x | | |
| <privacy> | x | x | x | x | |
| <relationship> | | x | | x | |
| <service-class> | | x | | x | |
| <sphere> | x | | x | | |
| <status-icon> | x | | x | x | |
| <time-offset> | x | | x | | |
| <user-input> | | | x | x | x |
+-----------------+------------+------+----------+---------+----------+
Table 1
In general, it is unlikely that a presentity will publish or announce
all of these elements at the same time. Rather, these elements were
chosen to give the presentity maximum flexibility in deriving this
information from existing sources, such as calendaring tools, device
activity sensors, or location trackers, as well as to manually
configure this information. In either case, there is no guarantee
that the information is accurate, as users forget to update calendars
or may not always adjust the presence information manually.
The namespace URIs for these elements defined by this specification
are URNs [2], using the namespace identifier 'ietf' defined by [4]
and extended by [6]:
urn:ietf:params:xml:ns:pidf:rpid
The elements marked with the value 'x' in column 2 of Table 1 MAY be
qualified with the 'from' and 'until' attributes to describe the
absolute time when the element assumed this value and the absolute
time until which this element is expected to be valid. Note that
there can be multiple elements of the same type, whose time ranges
SHOULD NOT overlap.
Elements MAY contain an 'id' attribute that allows to uniquely
reference the element.
Enumerations can be extended by elements from other namespaces, as
described in Section 6. The <activities>, <mood>, and <place-type>
elements can also take <other> elements containing text, for custom
free-text values specific to an application.
All elements described in this document are optional within PIDF
documents.
3.2. Activities Element
The <activities> element describes what the person is currently
doing, expressed as an enumeration of activity-describing elements.
A person can be engaged in multiple activities at the same time,
e.g., traveling and having a meal. The <activities> element can be
quite helpful to the watcher in judging how appropriate a
communication attempt is and which means of communications is most
likely to succeed and not annoy the person. The activity indications
correspond roughly to the category field in calendar entries, such as
Section 4.8.1.2 of RFC 2445 [13].
An activities enumeration consists of one or more elements using
elements drawn from the list below, a string enclosed in the <other>
element, or IANA-registered values from other namespaces (Section 7).
If a person publishes an activity of "permanent-absence", it is
likely that all services will report a status of CLOSED. In general,
services MAY advertise either service status for any activity value.
Activities such as <appointment>, <breakfast>, <dinner>, <holiday>,
<lunch>, <meal>, <meeting>, <performance>, <travel>, or <vacation>
can often be derived from calendar information.
appointment: The person has a calendar appointment, without
specifying exactly of what type. This activity is indicated if
more detailed information is not available or the person chooses
not to reveal more information.
away: The person is physically away from all interactive
communication devices. This activity element was included since
it can often be derived automatically from security systems,
energy management systems, or entry badge systems. Although this
activity would typically be associated with a status of CLOSED
across all services, a person may declare himself or herself away
to discourage communication, but indicate that he or she still can
be reached if needed. However, communication attempts might reach
an answering service, for example.
breakfast: The person is eating the first meal of the day, usually
eaten in the morning.
busy: The person is busy, without further details. Although this
activity would typically be associated with a status of CLOSED
across all services, a person may declare himself or herself busy
to discourage communication, but indicate that he or she still can
be reached if needed.
dinner: The person is having his or her main meal of the day, eaten
in the evening or at midday.
holiday: This is a scheduled national or local holiday.
in-transit: The person is riding in a vehicle, such as a car, but
not steering. The <place-type> element provides more specific
information about the type of conveyance the person is using.
looking-for-work: The presentity is looking for (paid) work.
lunch: The person is eating his or her midday meal.
meal: The person is scheduled for a meal, without specifying whether
it is breakfast, lunch, or dinner, or some other meal.
meeting: The person is in an assembly or gathering of people, as for
a business, social, or religious purpose. A meeting is a sub-
class of an appointment.
on-the-phone: The person is talking on the telephone. This activity
is included since it can often be derived automatically.
other: The person is engaged in an activity with no defined
representation as an <activities> element. The enclosed string
describes the activity in plain text.
performance: A performance is a sub-class of an appointment and
includes musical, theatrical, and cinematic performances as well
as lectures. It is distinguished from a meeting by the fact that
the person may either be lecturing or be in the audience, with a
potentially large number of other people, making interruptions
particularly noticeable.
permanent-absence: The person will not return for the foreseeable
future, e.g., because it is no longer working for the company.
This activity is associated with a status of CLOSED across all
services.
playing: The person is occupying himself or herself in amusement,
sport, or other recreation.
presentation: The person is giving a presentation, lecture, or
participating in a formal round-table discussion.
shopping: The person is visiting stores in search of goods or
services.
sleeping: This activity category can often be generated
automatically from a calendar, local time information, or
biometric data.
spectator: The person is observing an event, such as a sports event.
steering: The person is controlling a vehicle, watercraft, or plane.
travel: The person is on a business or personal trip, but not
necessarily in-transit.
tv: The person is watching television.
unknown: The activity of the person is unknown. This element is
generally not used together with other activities.
vacation: A period of time devoted to pleasure, rest, or relaxation.
working: The presentity is engaged in, typically paid, labor, as
part of a profession or job.
worship: The presentity is participating in religious rites.
The <activities> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
Example:
<activities>
<note>Enjoying the morning paper</note>
<vacation/>
<breakfast/>
<other>reading</other>
</activities>
3.3. Class Element
The <class> element describes the class of the service, device, or
person. Multiple elements can have the same class name within a
presence document, but each person, service, or device can only have
one class label. The naming of classes is left to the presentity.
The presentity can use this information to group similar services,
devices, or person elements or to convey information that the
presence agent can use for filtering or authorization. This
information is not generally presented to the watcher user interface.
The <class> element MUST NOT be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
3.4. Device Identifier
The <deviceID> element in the <tuple> element references the device
that provides a particular service. The element is defined
syntactically in the data model [16] schema. One service can be
provided by multiple devices, so that each service tuple may contain
zero or more <deviceID> elements. There is no significance in the
order of these elements.
The <deviceID> element MUST NOT be qualified with the 'from' and
'until' attributes as described in Section 3.1.
3.5. Mood Element
The <mood> element describes the mood of the presentity. The mood
values are enumerated chosen by the presentity. The mood itself is
provided as the element name of a defined child element of the <mood>
element (e.g., <happy/>); one such child element is REQUIRED. The
user MAY also specify a natural-language description of, or reason
for, the mood in the <note> child of the <mood> element, which is
OPTIONAL. (This definition follows the Jabber Extension JEP-107.)
It is RECOMMENDED that an implementation support the mood values
proposed in Jabber Extension JEP-0107, which in turn are a superset
of the Wireless Village [18] mood values and the values enumerated in
the Affective Knowledge Representation that has been defined by
Lisetti [17]:
A mood enumeration consists of one or more elements using elements
drawn from the list below, a string enclosed in the <other> element,
or IANA-registered values from other namespaces (Section 7).
The <mood> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
o afraid
o amazed
o angry
o annoyed
o anxious
o ashamed
o bored
o brave
o calm
o cold
o confused
o contented
o cranky
o curious
o depressed
o disappointed
o disgusted
o distracted
o embarrassed
o excited
o flirtatious
o frustrated
o grumpy
o guilty
o happy
o hot
o humbled
o humiliated
o hungry
o hurt
o impressed
o in_awe
o in_love
o indignant
o interested
o invincible
o jealous
o lonely
o mean
o moody
o nervous
o neutral
o offended
o other
o playful
o proud
o relieved
o remorseful
o restless
o sad
o sarcastic
o serious
o shocked
o shy
o sick
o sleepy
o stressed
o surprised
o thirsty
o unknown
o worried
Example:
<mood>
<note>I'm ready for the bar BOF!</note>
<sleepy/>
<thirsty/>
</mood>
3.6. Place-is Element
The <place-is> element describes properties of the place the person
is currently at. This offers the watcher an indication of what kind
of communication is likely to be successful. Each major media type
has its own set of attributes. Omitting the element indicates that
the property is unknown.
For audio, we define the following attributes:
noisy: The person is in a place with a level of background noise
that makes audio communications difficult.
ok: The environmental conditions are suitable for audio
communications.
quiet: The person is in a place such as a library, restaurant, place
of worship, or theater that discourages noise, conversation, and
other distractions.
unknown: The place attributes for audio are unknown.
For video, we define the following attributes:
toobright: The person is in a bright place, sufficient for good
rendering on video.
ok: The environmental conditions are suitable for video.
dark: The person is in a dark place, and thus the camera may not be
able to capture a good image.
unknown: The place attributes for video are unknown.
For text (real-time text and instant messaging), we define
uncomfortable: Typing or other text entry is uncomfortable.
inappropriate: Typing or other text entry is inappropriate, e.g.,
since the user is in a vehicle or house of worship.
ok: The environmental conditions are suitable for text-based
communications.
unknown: The place attributes for text are unknown.
This list can be augmented by free-text values in a note or
additional IANA-registered values (Section 7).
The <place-is> element contains other elements, e.g.,
<place-is>
<audio>
<noisy />
</audio>
<video>
<dark />
</video>
</place-is>
The <place-is> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
3.7. Place-type Element
The <place-type> element describes the type of place the person is
currently at. This offers the watcher an indication of what kind of
communication is likely to be appropriate. The initial set of values
is contained in RFC 4589 [12].
This list can be augmented by free-text values or additional IANA-
registered values as described in RFC 4589.
The <place-type> element is a choice of elements, as in
<place-type>
<pt:street/>
</place-type>
The <place-type> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
3.8. Privacy Element
The <privacy> element indicates which types of communication third
parties in the vicinity of the presentity are unlikely to be able to
intercept accidentally or intentionally. This does not in any way
describe the privacy properties of the electronic communication
channel, e.g., properties of the encryption algorithm or the network
protocol used.
audio: Inappropriate individuals are not likely to overhear audio
communications.
text: Inappropriate individuals are not likely to see text
communications.
unknown: This information is unknown.
video: Inappropriate individuals are not likely to see video
communications.
The <privacy> element can be used by logic executing on the
watcher or by a composer to filter, sort and label tuples. For
example, a composer may have rules that limit the publication of
tuples labeled "private" to a select subset of the watchers.
The <privacy> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
Example:
<privacy>
<text/>
<audio/>
</privacy>
3.9. Relationship Element
The <relationship> element extends <tuple> and designates the type of
relationship an alternate contact has with the presentity. This
element is provided only if the tuple refers to somebody other than
the presentity. Relationship values include "family", "friend",
"associate" (e.g., for a colleague), "assistant", "supervisor",
"self", and "unknown". The default is "self".
If a relationship is indicated, the URI in the <contact> element
refers to the entity, such as the assistant, that has a relationship
to the presentity, not the presentity itself.
Like tuples without a <relationship> qualifier, the <contact> element
for tuples labeled with a relationship can contain either a
communication URI such as "im", "sip", "sips", "h323", "tel", or
"mailto", or a presence URI, such as "pres" or "sip".
Example:
<relationship>
<friend/>
</relationship>
3.10. Service Class
The <service-class> element extends <tuple> and designates the type
of service offered.
electronic: Delivery of information by electronic means, i.e.,
without delivering physical objects. Examples include telephone,
fax, email, instant messaging, and SMS.
postal: Delivery by the postal service, e.g., as a letter, parcel,
or postcard. Delivery could be to a post office box or central
mailroom rather than the presentity's office location, for
example.
courier: Delivery by messenger, overnight delivery, or courier.
Courier-delivered messages are usually delivered to a receptionist
rather than, say, a mailroom or receiving department.
freight: Delivery by freight carrier, typically of larger objects
that are not sent by postal mail or courier. The recipient is
often the shipping department or a loading dock.
in-person: Describes the coordinates for visits in person, as by a
visitor, i.e., usually somebody's office or residence.
unknown: The type of service is unknown.
Electronic service is implied if omitted. The service types
'postal', 'courier', 'freight', and 'in-person' MUST NOT be used
unless the contact URI is empty. Additional data elements defined
elsewhere describe the physical service delivery address for the in-
person, postal, or delivery services. Such addresses might be
specified in geospatial coordinates, civic addresses, or some
specialized address format, e.g., for interstellar addresses or a
company-specific delivery system.
Example:
<service-class><postal/></service-class>
3.11. Sphere Element
The <sphere> element designates the current state and role that the
person plays. For example, it might describe whether the person is
in a work mode, at home, or participating in activities related to
some other organization such as the IETF or a church. This document
does not define names for these spheres except for two common ones,
"work" and "home", as well as "unknown".
Spheres allow the person to easily turn on or off certain rules that
depend on what groups of people should be made aware of the person's
status. For example, if the person is a Boy Scout leader, he might
set the sphere to "scouting" and then have a rule set that allows
other scout masters in his troop to see his presence status. As soon
as he switches his status to "work", "home", or some other sphere,
the fellow scouts would lose access.
The <sphere> element MAY be qualified with the 'from' and 'until'
attributes as described in Section 3.1.
Example:
<sphere>
<home/>
</sphere>
3.12. Status-Icon Element
The <status-icon> element includes a URI pointing to an image (icon)
representing the current status of the person or service. The
watcher MAY use this information to represent the status in a
graphical user interface. Presentities SHOULD provide images of
sizes and aspect ratios that are appropriate for rendering as an
icon. Support for JPEG, PNG, and GIF formats is RECOMMENDED.
Watchers resolving the URI MUST validate whether the local copy of
the icon is current when receiving a notification, using the standard
cache control mechanism in the URI-identified retrieval protocol.
Example:
<status-icon>http://www.example.com/playing.gif</status-icon>
3.13. Time Offset
The <time-offset> element describes the number of minutes of offset
from UTC at the person's current location. A positive number
indicates that the local time-of-day is ahead (i.e., east of)
Universal Time, while a negative number indicates that the local
time-of-day is behind (i.e., west of) Universal Time. Transitions
into and out of daylight savings time may temporarily cause a
difference between the true offset from UTC and the time offset
element.
An optional attribute, description, can be used to describe the
offset, e.g., by labeling the time zone. This description is meant
for human consumption.
Publishers on mobile devices SHOULD NOT publish this information
unless they know the time offset information to reflect the current
location. (For example, many laptop users do not update their time
zone when traveling.) Publishers SHOULD update the information
whenever they discover that their UTC offset has changed.
Example:
<time-offset description="America/New_York">-300
</time-offset>
3.14. User-Input Element
The <user-input> element records the user-input or usage state of the
service or device, based on human user input, e.g., keyboard,
pointing device, or voice. If contained in a <person> element, it
summarizes any user input activity across all services and devices
operated by the presentity. The mechanism for such aggregation is
beyond the scope of this document, but generally reflects the most
recent user input across all devices and services. The element can
assume one of two values, namely, 'active' or 'idle', with an
optional 'last-input' attribute that records when the last user input
was received. An optional 'idle-threshold' element records how long
the presentity will wait before reporting the service or device to be
idle, measured in seconds.
(A two-state model was chosen since it would otherwise be necessary
to send repeated last-input updates during continuous activity.)
A service that wants to indicate user input activity sends a <user-
input> 'active' indication when the user has provided user input
within a configurable interval of time, the idle-threshold. If the
user ceases to provide input and the idle-threshold has elapsed, the
tuple is marked with a <user-input> 'idle' indication instead,
optionally including the time of last activity in the 'last-input'
attribute. An example is below:
<user-input idle-threshold="600"
last-input="2004-10-21T13:20:00.000-05:00">idle</user-input>
Depending on device or service capabilities, user input may be
detected only for a particular application, i.e., when the
application has user focus or when a user has sent a message or
placed a call, or can be based on user input across all applications
running on one end system.
The <user-input> element may be used by a watcher, typically in
combination with other data, to estimate how likely a user is to
answer when contacting the service. A tuple that has not been used
in a while may still be OPEN, but a watcher may choose to first
contact a URI in a tuple that is both OPEN and has been used more
recently.
The <user-input> attribute can be omitted if the presentity wants to
indicate that the device has not been used for a while, but does not
want to reveal the precise duration, as in the following:
<user-input>idle</user-input>
Configuration MUST include the option to omit the 'last-input'
attribute.
4. Example
The example below describes the presentity
'pres:someone@example.com', which has a SIP contact,
'sip:someone@example.com', representing a service. It also has a
device contact, as an email box. The presentity is in a meeting, in
a public office setting. The 'until' information indicates that he
will be there until 5:30 pm local time. The presentity also has an
assistant, sip:secretary@example.com, who happens to be available for
communications.
<?xml version="1.0" encoding="UTF-8"?>
<presence xmlns="urn:ietf:params:xml:ns:pidf"
xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model"
xmlns:lt="urn:ietf:params:xml:ns:location-type"
xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid"
entity="pres:someone@example.com">
<tuple id="bs35r9">
<status>
<basic>open</basic>
</status>
<dm:deviceID>urn:device:0003ba4811e3</dm:deviceID>
<rpid:relationship><rpid:self/></rpid:relationship>
<rpid:service-class><rpid:electronic/></rpid:service-class>
<contact priority="0.8">im:someone@mobile.example.net</contact>
<note xml:lang="en">Don't Disturb Please!</note>
<note xml:lang="fr">Ne derangez pas, s'il vous plait</note>
<timestamp>2005-10-27T16:49:29Z</timestamp>
</tuple>
<tuple id="ty4658">
<status>
<basic>open</basic>
</status>
<rpid:relationship><rpid:assistant/></rpid:relationship>
<contact priority="1.0">mailto:secretary@example.com</contact>
</tuple>
<tuple id="eg92n8">
<status>
<basic>open</basic>
</status>
<dm:deviceID>urn:x-mac:0003ba4811e3</dm:deviceID>
<rpid:class>email</rpid:class>
<rpid:service-class><rpid:electronic/></rpid:service-class>
<rpid:status-icon>http://example.com/mail.png</rpid:status-icon>
<contact priority="1.0">mailto:someone@example.com</contact>
</tuple>
<note>I'll be in Tokyo next week</note>
<dm:device id="pc147">
<rpid:user-input idle-threshold="600"
last-input="2004-10-21T13:20:00-05:00">idle</rpid:user-input>
<dm:deviceID>urn:device:0003ba4811e3</dm:deviceID>
<dm:note>PC</dm:note>
</dm:device>
<dm:person id="p1">
<rpid:activities from="2005-05-30T12:00:00+05:00"
until="2005-05-30T17:00:00+05:00">
<rpid:note>Far away</rpid:note>
<rpid:away/>
</rpid:activities>
<rpid:class>calendar</rpid:class>
<rpid:mood>
<rpid:angry/>
<rpid:other>brooding</rpid:other>
</rpid:mood>
<rpid:place-is>
<rpid:audio>
<rpid:noisy/>
</rpid:audio>
</rpid:place-is>
<rpid:place-type><lt:residence/></rpid:place-type>
<rpid:privacy><rpid:unknown/></rpid:privacy>
<rpid:sphere>bowling league</rpid:sphere>
<rpid:status-icon>http://example.com/play.gif</rpid:status-icon>
<rpid:time-offset>-240</rpid:time-offset>
<dm:note>Scoring 120</dm:note>
<dm:timestamp>2005-05-30T16:09:44+05:00</dm:timestamp>
</dm:person>
</presence>
5. XML Schema Definitions
The RPID schema is shown below. Due to limitations in composing
schemas, not all XML documents that validate against the schema below
are semantically valid RPID documents. In particular, the schema
allows each element to appear anyhere in PIDF or data-model elements;
Table 1 restricts where these elements can appear for semantically
valid RPID documents. Elements that do not have from/until
parameters MUST NOT appear more than once in each <person>, <tuple>,
or <device>.
5.1. urn:ietf:params:xml:ns:pidf:rpid
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="urn:ietf:params:xml:ns:pidf:rpid"
xmlns="urn:ietf:params:xml:ns:pidf:rpid"
xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<xs:simpleType name="activeIdle">
<xs:restriction base="xs:string">
<xs:enumeration value="active"/>
<xs:enumeration value="idle"/>
</xs:restriction>
</xs:simpleType>
<xs:element name="activities">
<xs:annotation>
<xs:documentation>
Describes what the person is currently doing, expressed as
an enumeration of activity-describing elements. A person
can be engaged in multiple activities at the same time,
e.g., traveling and having a meal.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="unknown" type="empty" minOccurs="0"/>
<xs:sequence maxOccurs="unbounded">
<xs:choice>
<xs:element name="appointment"
type="empty" />
<xs:element name="away"
type="empty" />
<xs:element name="breakfast"
type="empty" />
<xs:element name="busy"
type="empty" />
<xs:element name="dinner"
type="empty" />
<xs:element name="holiday"
type="empty" />
<xs:element name="in-transit"
type="empty" />
<xs:element name="looking-for-work"
type="empty" />
<xs:element name="meal"
type="empty" />
<xs:element name="meeting"
type="empty" />
<xs:element name="on-the-phone"
type="empty" />
<xs:element name="performance"
type="empty" />
<xs:element name="permanent-absence"
type="empty" />
<xs:element name="playing"
type="empty" />
<xs:element name="presentation"
type="empty" />
<xs:element name="shopping"
type="empty" />
<xs:element name="sleeping"
type="empty" />
<xs:element name="spectator"
type="empty" />
<xs:element name="steering"
type="empty" />
<xs:element name="travel"
type="empty" />
<xs:element name="tv"
type="empty" />
<xs:element name="vacation"
type="empty" />
<xs:element name="working"
type="empty" />
<xs:element name="worship"
type="empty" />
<xs:element name="other"
type="Note_t" />
<xs:any namespace="##other"
maxOccurs="unbounded" processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:choice>
</xs:sequence>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="class" type="xs:token">
<xs:annotation>
<xs:documentation>
Describes the class of the service, device or person.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="mood">
<xs:annotation>
<xs:documentation>
Describes the mood of the presentity.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="unknown" type="empty"/>
<xs:sequence maxOccurs="unbounded">
<xs:choice>
<xs:element name="afraid"
type="empty"/>
<xs:element name="amazed"
type="empty"/>
<xs:element name="angry"
type="empty"/>
<xs:element name="annoyed"
type="empty"/>
<xs:element name="anxious"
type="empty" />
<xs:element name="ashamed"
type="empty" />
<xs:element name="bored"
type="empty" />
<xs:element name="brave"
type="empty" />
<xs:element name="calm"
type="empty" />
<xs:element name="cold"
type="empty" />
<xs:element name="confused"
type="empty" />
<xs:element name="contented"
type="empty" />
<xs:element name="cranky"
type="empty" />
<xs:element name="curious"
type="empty" />
<xs:element name="depressed"
type="empty" />
<xs:element name="disappointed"
type="empty" />
<xs:element name="disgusted"
type="empty" />
<xs:element name="distracted"
type="empty" />
<xs:element name="embarrassed"
type="empty" />
<xs:element name="excited"
type="empty" />
<xs:element name="flirtatious"
type="empty" />
<xs:element name="frustrated"
type="empty" />
<xs:element name="grumpy"
type="empty" />
<xs:element name="guilty"
type="empty" />
<xs:element name="happy"
type="empty" />
<xs:element name="hot"
type="empty" />
<xs:element name="humbled"
type="empty" />
<xs:element name="humiliated"
type="empty" />
<xs:element name="hungry"
type="empty" />
<xs:element name="hurt"
type="empty" />
<xs:element name="impressed"
type="empty" />
<xs:element name="in_awe"
type="empty" />
<xs:element name="in_love"
type="empty" />
<xs:element name="indignant"
type="empty" />
<xs:element name="interested"
type="empty" />
<xs:element name="invincible"
type="empty" />
<xs:element name="jealous"
type="empty" />
<xs:element name="lonely"
type="empty" />
<xs:element name="mean"
type="empty" />
<xs:element name="moody"
type="empty" />
<xs:element name="nervous"
type="empty" />
<xs:element name="neutral"
type="empty" />
<xs:element name="offended"
type="empty" />
<xs:element name="playful"
type="empty" />
<xs:element name="proud"
type="empty" />
<xs:element name="relieved"
type="empty" />
<xs:element name="remorseful"
type="empty" />
<xs:element name="restless"
type="empty" />
<xs:element name="sad"
type="empty" />
<xs:element name="sarcastic"
type="empty" />
<xs:element name="serious"
type="empty" />
<xs:element name="shocked"
type="empty" />
<xs:element name="shy"
type="empty" />
<xs:element name="sick"
type="empty" />
<xs:element name="sleepy"
type="empty" />
<xs:element name="stressed"
type="empty" />
<xs:element name="surprised"
type="empty" />
<xs:element name="thirsty"
type="empty" />
<xs:element name="worried"
type="empty" />
<xs:element name="other"
type="Note_t" />
<xs:any namespace="##other"
maxOccurs="unbounded" processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:choice>
</xs:sequence>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="place-is">
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:element name="audio" minOccurs="0">
<xs:complexType>
<xs:choice>
<xs:element name="noisy" type="empty" />
<xs:element name="ok" type="empty" />
<xs:element name="quiet" type="empty" />
<xs:element name="unknown" type="empty" />
</xs:choice>
</xs:complexType>
</xs:element>
<xs:element name="video" minOccurs="0">
<xs:complexType>
<xs:choice>
<xs:element name="toobright" type="empty" />
<xs:element name="ok" type="empty" />
<xs:element name="dark" type="empty" />
<xs:element name="unknown" type="empty" />
</xs:choice>
</xs:complexType>
</xs:element>
<xs:element name="text" minOccurs="0">
<xs:complexType>
<xs:choice>
<xs:element name="uncomfortable" type="empty" />
<xs:element name="inappropriate" type="empty" />
<xs:element name="ok" type="empty" />
<xs:element name="unknown" type="empty" />
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="place-type">
<xs:annotation>
<xs:documentation>
Describes the type of place the person is currently at.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="other" type="Note_t"/>
<xs:any namespace="##other" maxOccurs="unbounded"
processContents="lax"/>
</xs:choice>
</xs:sequence>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="privacy">
<xs:annotation>
<xs:documentation>
Indicates which type of communication third parties in the
vicinity of the presentity are unlikely to be able to
intercept accidentally or intentionally.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="unknown" type="empty"/>
<xs:sequence minOccurs="1">
<xs:element name="audio" type="empty" minOccurs="0"/>
<xs:element name="text" type="empty" minOccurs="0"/>
<xs:element name="video" type="empty" minOccurs="0"/>
<xs:any namespace="##other" minOccurs="0"
maxOccurs="unbounded" processContents="lax"/>
</xs:sequence>
</xs:choice>
</xs:sequence>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="relationship">
<xs:annotation>
<xs:documentation>
Designates the type of relationship an alternate contact
has with the presentity.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="assistant" type="empty" />
<xs:element name="associate" type="empty" />
<xs:element name="family" type="empty" />
<xs:element name="friend" type="empty" />
<xs:element name="other" type="Note_t" minOccurs="0" />
<xs:element name="self" type="empty" />
<xs:element name="supervisor" type="empty" />
<xs:element name="unknown" type="empty" />
<xs:any namespace="##other" maxOccurs="unbounded"
processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="service-class">
<xs:annotation>
<xs:documentation>
Designates the type of service offered.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="note" type="Note_t" minOccurs="0"
maxOccurs="unbounded" />
<xs:choice>
<xs:element name="courier" type="empty" />
<xs:element name="electronic" type="empty" />
<xs:element name="freight" type="empty" />
<xs:element name="in-person" type="empty" />
<xs:element name="postal" type="empty" />
<xs:element name="unknown" type="empty" />
<xs:any namespace="##other" maxOccurs="unbounded"
processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sphere">
<xs:annotation>
<xs:documentation>
Designates the current state and role that the person plays.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:choice minOccurs="0">
<xs:element name="home" type="empty" />
<xs:element name="work" type="empty" />
<xs:element name="unknown" type="empty" />
<xs:any namespace="##other" maxOccurs="unbounded"
processContents="lax"/>
</xs:choice>
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:element>
<xs:element name="status-icon">
<xs:annotation>
<xs:documentation>
A URI pointing to an image (icon) representing the current
status of the person or service.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:anyURI">
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name="time-offset">
<xs:annotation>
<xs:documentation>
Describes the number of minutes of offset from UTC at the
user's current location.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:integer">
<xs:attributeGroup ref="fromUntil"/>
<xs:attribute name="description"
type="xs:string"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name="user-input">
<xs:annotation>
<xs:documentation>
Records the user-input or usage state of the service or
device.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:simpleContent>
<xs:extension base="activeIdle">
<xs:attribute name="idle-threshold"
type="xs:positiveInteger"/>
<xs:attribute name="last-input" type="xs:dateTime"/>
<xs:attribute name="id" type="xs:ID"/>
<xs:anyAttribute namespace="##any"
processContents="lax"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
</xs:schema>
6. Extending RPID
Any developer can introduce their own element names, avoiding
conflict by choosing an appropriate namespace URI. To add new
standardized elements to the enumerations <activities>, <mood>,
<privacy>, <relationship> and <service-class>, the extension process
described in PIDF [9] is followed, i.e., such extensions would use
namespace designators such as urn:ietf:params:xml:ns:pidf:ext, where
'ext' is the name of the extension. Any new values for the <place-
type> element are assigned according to [12] and are given a
namespace designator at their time of registration.
To avoid the unnecessary proliferation of XML namespaces containing a
single element, groups of element registrations for each of these
enumerations, such as <privacy>, SHOULD be bundled into a single
namespace rather than assigning a new namespace to each new element.
7. IANA Considerations
7.1. URN Sub-Namespace Registration for
'urn:ietf:params:xml:ns:pidf:rpid'
URI: urn:ietf:params:xml:ns:pidf:rpid
Description: This is the XML namespace for XML elements defined by
RFC 4480 to describe rich presence information extensions for the
status element in the PIDF presence document format in the
application/pidf+xml content type.
Registrant Contact: IETF, SIMPLE working group, simple@ietf.org,
Henning Schulzrinne, hgs@cs.columbia.edu
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
"http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
<html xmlns="http://www.w3.org/1999/xhtml
<head>
<meta http-equiv="content-type"
content="text/html;charset=iso-8859-1"/>
<title>RPID: Rich Presence Extensions to the Presence
Information Data Format (PIDF)</title>
</head>
<body>
<h1>Namespace for rich presence extension</h1>
<h2>urn:ietf:params:xml:ns:pidf:rpid</h2>
<p>See <a href="http://www.rfc-editor.org/rfc/rfc4480.txt">
RFC&4480;</a>.</p>
</body>
</html>
END
7.2. Schema Registration for Schema
'urn:ietf:params:xml:ns:pidf:status:rpid'
URI: urn:ietf:params:xml:ns:pidf:status:rpid
Registrant Contact: IESG
XML: See Section 5
Note that this document does not need a new content type. It
inherits the content type from [8], namely, application/pidf+xml.
8. Internationalization Considerations
RPID contains mostly tokens that are meant for consumption by
programs, not directly by humans. Programs are expected to translate
those tokens into language-appropriate text strings according to the
preferences of the watcher.
Some elements may contain <note> and <other> elements that can
contain free text. These elements SHOULD be labeled with the 'xml:
lang' attribute to indicate their language and script. The
specification allows multiple occurrences of these elements so that
the presentity can convey <note> and <other> elements in multiple
scripts and languages. If no 'xml:lang' attribute is provided, the
default value is "i-default" [3].
Since RPID is represented in XML, it provides native support for
encoding information using the Unicode character set and its more
compact representations including UTF-8. Conformant XML processors
recognize both UTF-8 and UTF-16. Though XML includes provisions to
identify and use other character encodings through use of an
"encoding" attribute in an <?xml?> declaration, use of UTF-8 is
RECOMMENDED in environments where parser encoding support
incompatibility exists.
A description of time-zone considerations can be found in
Section 3.13.
9. Security Considerations
The security considerations in [8] apply, as well as [7]. Compared
to PIDF, this presence document format reveals additional information
about presentities that can be highly sensitive. Beyond traditional
security measures to protect confidentiality and integrity, systems
should offer a means to selectively reveal information to particular
watchers and to inspect the information that is being published,
particularly if it is generated automatically from other sources,
such as calendars or sensors.
Like any reference to an external object, the <status-icon> may allow
the presentity to induce the watcher to retrieve data from a third
party (content indirection attack), thus either retrieving harmful
content or adding to the server load of the referenced resource.
10. References
10.1. Normative References
[1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[2] Moats, R., "URN Syntax", RFC 2141, May 1997.
[3] Alvestrand, H., "IETF Policy on Character Sets and Languages",
BCP 18, RFC 2277, January 1998.
[4] Moats, R., "A URN Namespace for IETF Documents", RFC 2648,
August 1999.
[5] Day, M., Rosenberg, J., and H. Sugano, "A Model for Presence
and Instant Messaging", RFC 2778, February 2000.
[6] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
January 2004.
[7] Rosenberg, J., "A Presence Event Package for the Session
Initiation Protocol (SIP)", RFC 3856, August 2004.
[8] Sugano, H., Fujimoto, S., Klyne, G., Bateman, A., Carr, W., and
J. Peterson, "Presence Information Data Format (PIDF)", RFC
3863, August 2004.
[9] Yergeau, F., Paoli, J., Sperberg-McQueen, C., Bray, T., and E.
Maler, "Extensible Markup Language (XML) 1.0 (Third Edition),"
W3C REC REC-xml-20040204, February 2004.
[10] Maloney, M., Beech, D., Thompson, H., and N. Mendelsohn, "XML
Schema Part 1: Structures Second Edition", W3C REC REC-
xmlschema-1-20041028, October 2004.
[11] Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes Second
Edition", W3C REC REC-xmlschema-2-20041028, October 2004.
[12] Schulzrinne, H. and H. Tschofenig, "Location Types Registry",
RFC 4589, July 2006.
10.2. Informative References
[13] Dawson, F. and D. Stenerson, "Internet Calendaring and
Scheduling Core Object Specification (iCalendar)", RFC 2445,
November 1998.
[14] Peterson, J., "Common Profile for Instant Messaging (CPIM)",
RFC 3860, August 2004.
[15] Lennox, J., Wu, X., and H. Schulzrinne, "Call Processing
Language (CPL): A Language for User Control of Internet
Telephony Services", RFC 3880, October 2004.
[16] Rosenberg, J., "A Data Model for Presence", RFC 4479, July
2006.
[17] Lisetti, C., "Personality, Affect, and Emotion Taxonomy for
Socially Intelligent Agents", Proceedings of FLAIRS 2002, 2002.
[18] Open Mobile Alliance, "The Wireless Village Initiative:
Presence Attributes 1.1", Recommendation WV-29, 2004.
Appendix A. Acknowledgements
The document reflects the discussion on the SIMPLE mailing list, with
contributions from many individuals. David L. Black, Miguel Garcia,
Avshalom Houri, Markus Isomaki, Rick Jones, Hisham Khartabil,
Jonathan Lennox, Eva-Maria Leppanen, Mikko Lonnfors, Rohan Mahy,
Miguel Marcia, Andrew Newton, Aki Niemi, Jon Peterson, and Brian
Rosen provided detailed comments and suggestions. Xiaotao Wu
assisted with schema testing. Jari Urpalainen provided valuable
advice on XML schema issues.
Authors' Addresses
Henning Schulzrinne
Columbia University
Department of Computer Science
450 Computer Science Building
New York, NY 10027
US
Phone: +1 212 939 7042
EMail: hgs+simple@cs.columbia.edu
URI: http://www.cs.columbia.edu
Vijay Gurbani
Lucent
2000 Naperville Rd.
Room 6G-440
Naperville, IL 60566-7033
US
EMail: vkg@lucent.com
Paul Kyzivat
Cisco Systems
BXB500 C2-2
1414 Massachusetts Avenue
Boxborough, MA 01719
US
EMail: pkyzivat@cisco.com
Jonathan Rosenberg
Cisco Systems
600 Lanidex Plaza
Parsippany, NJ 07054-2711
US
EMail: jdrosen@cisco.com
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
|
Comment about this RFC, ask questions, or add new information about this topic: