|
Posted-By: auto-faq 3.3 beta (Perl 5.004)
Archive-name: theatre/stagecraft/faq
Posting-Frequency: posted on the 27th of each month
A how-to-find-the-FAQ article is posted on the 5th, 12th and 19th
Stagecraft Frequently Asked Questions
Table of Contents
1. Welcome to the Stagecraft FAQ
About these newsgroups (/netiquette/)
1. What is this newsgroup for? What is appropriate here?
2. Posting guidelines and suggestions
3. Where can I find out more about newsgroups?
4. Is rec.arts.theatre.stagecraft archived anywhere?
5. Can I get rec.arts.theatre.stagecraft by email?
Scenery (/scenery/)
1. Vacuum forming information?
2. foam surface treatment
Lighting (/lighting/)
1. Where do I find PMX (GoldenScan,RS232) protocol info?
2. Where do I find more info about DMX512?
3. What's a 'Ghost Light'?
4. What's the pinout for Socapex?
5. What's the pinout for Lectriflex?
6. How do I make my own gobos?
7. Dimming fluorescent tubes.
8. Flicker effects - TV, fire, cinema.
9. How do I get rid of spill (stray light) from my lanterns?
10. Which should I buy, ETC or Strand?
11. Keystoning slides for rear projection
12. How do you light a 'Glitter-ball'
Sound (/sound/)
1. What's the XLR pinout?
2. What is phantom power?
3. How do I connect balanced and unbalanced equipment?
4. Music stands.
5. Sound effects CDs
Props and special effects (/props/)
1. How do I ring an on-stage phone?
2. Audrey II for Little Shop of Horrors
3. Stage Blood recipes
4. How do I hang an actor?
5. Flickering candles
6. Masks?
7. Cutting styrofoam or Polystyrene
8. Toffee glass / Candy glass bottles?
9. How can you make realistic whip marks on an actors back?
10. Flying People
11. Spliffs? Joints? Reefers? Marijuana cigarettes?
12. Smoke, fog, haze, CO2, LN2? What's the difference?
13. How do I clean my smoke machine?
14. How do you make smoke rings?
15. Pyrotechnics - explosions, flashes, smoke
16. Refilling beverage cans
17. Welch vacuum forming pump
18. Berry Stains
19. How do you cut mirror?
20.
CAD and other software (/cad/)
1. Are there any lighting symbols freely available for
Other miscellaneous stuff (/misc/)
1. How do I contact ArtSearch?
2. What's a Green Room?
3. Why are stages painted black?
4. Teasers & Tormenters
Other resources (/other_resources/)
1. Are there any related mailing lists?
2. What are some good books?
3. What magazines are there?
4. Any other online resources?
5. Which newsgroups carry Stagecraft related material?
Show production, tour management and arts management
1. What about copyright?
2. Saving money on posters, flyers, programs.
3. 'Net access while touring
4. Directories and Yearbooks
5. Script publishers information
Stage Management (/stage_management/)
1. What are cue lights?
2. What should be in a stage managers toolkit?
Subject: 1. Welcome to the Stagecraft FAQ
These frequently asked questions about stagecraft are posted monthly to
rec.arts.theatre.stagecraft and alt.stagecraft
If you find any problems (wrong or out of date info, a web site that's
vanished....) or have any new stuff to add to the FAQ then either drop
me some email to ratsfaq@blighty.com or head to the web pages at
http://www.blighty.com/ratsfaq/ and fix things yourself.
If you're reading this from a CD-ROM or a printed copy then it's already
out of date. You can find a current copy at
http://www.blighty.com/ratsfaq/ or by sending email to
sendfaq@blighty.com
Earthlink customers - because of attempts by earthlink customers and
employees to crash this server email access from earthlink.net has been
blocked. Sorry. You can still read or edit the FAQ on the web or read
the version posted to the newsgroups.
Legal notes
I'd rather not have to do this, but I've been told it'll save me a lot
of pain in the future:
"By using this document you agree to absolve Steve Atkins and all other
authors of all liability for any loss or suffering related to your use
of this document"
The stagecraft FAQ as a collection is Copyright 1997 Steve Atkins.
Individual sections of the FAQ retain the copyright of the original
contributor.
* License is granted for electronic redistribution of the textual
form of the FAQ provided it's altered in no significant way.
* License is granted for distribution on CD-ROM compilations with a
total retail cost of less than US$30 provided the FAQ is
distributed complete, altered in no significant way.
* License is granted to make electronic or hard copy for personal
use, provided this copyright notice is retained.
Anything else, ask me at ratsfaq@blighty.com . I'll almost certainly
agree.
The FAQ is maintained with the aid of faqomatic software, derived from
code written by Jon Howell ( http://www.cs.dartmouth.edu/~jonh/ ).
On to the useful stuff...
Subject: About these newsgroups (/netiquette/)
Subject: 1. What is this newsgroup for? What is appropriate here?
rec.arts.theatre.stagecraft is for the discussion of the technical and
backstage aspects of performance art.
This includes lighting, sound, set construction and design, costume,
stage management, production, pyrotechnics, props, and related areas.
If you're announcing a production, and you're simply trying to attract
customers, then you might be better off elsewhere (local announcement or
arts newsgroups, the Opera server at http://www.fsz.bme.hu/opera/ , or
maybe rec.arts.theatre.plays or rec.arts.theatre.musicals ).
Soliciting crew for forthcoming productions is generally acceptable, but
remember that one post will reach everyone who reads the newsgroup, and
multiple posts may give a bad impression to potential crew.
Irrelevant commercial postings are unwelcome , but occasional brief
commercial postings relevant to the charter of the group are acceptable
to most readers. Before posting an advertisement here you should read
the group for a week or so, to see whether your ad is relevant. You
should also read Advertising on Usenet, how to do it, how not to do it
at http://www.danger.com/advo.html
I believe similar standards are appropriate for alt.stagecraft - I'm
sure I'll be corrected if they aren't.
Subject: 2. Posting guidelines and suggestions
[The original rec.arts.theatre.* hierarchy was rec.arts.theatre.musicals
, rec.arts.theatre.stagecraft , rec.arts.theatre.plays and
rec.arts.theatre.misc . I have seen references to
rec.arts.theatre.improv, but it doesn't exist at my server, so I assume
it failed it's vote. rec.arts.theatre.stagecraft was supposed to replace
alt.stagecraft but at the moment both remain active. r.a.t.stagecraft is
higher traffic and has more information, but alt.stagecraft has a better
signal to noise ratio
-- Steve Atkins]
From the rec.arts.theatre.* charter:
All four groups are unmoderated
All four newsgroups will be unmoderated, which means anyone is free to
post messages to the newsgroup. All criticism ought to be constructive
and polite, and all messages ought to be compatible with generally
accepted netiquette. Personal messages in the newsgroup is discouraged,
although not so that it limits free and unencumbered discussion.
Crossposting within rec.arts.theatre.*
Like other hierarchies, all of the newsgroups within the r.a.t.* are
related, yet at the same time we have to acknowledge that they are
separate groups and that there will be a tendency to cross-post
announcements between the groups. However, it is also acknowledged that
anyone capable of reading one of the four groups will most likely know
about and have access to the other groups in the hierarchy. Therefore,
we can logically conclude that if someone isn't subscribed to all four
groups it is for a reason, and not a mischance.
The point is this: Consistent crossposting between all four newsgroups
ultimately defeats the purpose of having separate newsgroups. If you
have a message that is truly related to more than one of the topics,
such as a play with a lot of music or if you are talking about how the
tire rises in the Broadway production of _Cats_, then by all means users
are encouraged to cross-post their message to more than one group.
However, just because you *really* need to know who wrote the play
_Chryseide_and_Arimand_ doesn't mean you ought to post the message to
rec.arts.theatre.stagecraft. Posters are asked to use their own judgment
regarding what ought to be discussed in more than one group.
Use of Followup-To: encouraged when crossposting
If you ARE going to crosspost between the four groups, it is recommended
that you include a "Followup-To:" expression in the header of your
message, which will ultimately point traffic towards one group. The
justification for this is because the assumption is once again made that
people will tend to read all four of the groups and that having the same
thread appear in two, three or four newsgroups will ultimately prove
annoying. Under this method, people who do not read all four groups will
at least know the discussion is taking place and will have the option of
engaging in that discussion by joining whichever group the topic is
being followed up to. This will hopefully eliminate superfluous net
traffic.
Subject: 3. Where can I find out more about newsgroups?
The usenet info centre at
http://sunsite.unc.edu/usenet-i/usenet-help.html has a number of
introductory documents.
You should also subscribe to news.announce.newusers , and look for these
documents:
* A_Primer_on_How_to_Work_With_the_Usenet_Community
* Answers_to_Frequently_Asked_Questions_about_Usenet
* Emily_Postnews_Answers_Your_Questions_on_Netiquette
* Hints_on_writing_style_for_Usenet
* Introduction_to_the_*.answers_newsgroups
* Rules_for_posting_to_Usenet
* What_is_Usenet?
* DRAFT_FAQ:_Advertising_on_Usenet:_How_To_Do_It,_How_Not_To_Do_It
If you only have email access send mail to mail-server@rtfm.mit.edu with
the following lines in the message:
help
send
usenet/news.announce.newusers/Introduction_to_the_*.answers_newsgroups
If you have any questions a good place to ask them is the newsgroup
news.newusers.questions
Subject: 4. Is rec.arts.theatre.stagecraft archived anywhere?
Well, sort of. You can usually find what you're looking for by searching
one of the usenet search sites, such as Altavista (
http://altavista.digital.com/ ) or DejaNews ( http://www.dejanews.com/ )
Subject: 5. Can I get rec.arts.theatre.stagecraft by email?
Yes. Send email to majordomo@world.std.com and in the body of the
message put ' subscribe stagecraft '.
Subject: Scenery (/scenery/)
Subject: 1. Vacuum forming information?
Stiegelbauer Associates (NY, USA) do custom vacforming and stock a range
of standard (brick/stone/column) vacforms. See
http://www.panix.com/jviii/pclients/stiegbr.html .
The Prop Builders Molding and Casting Handbook, ISBN 1-55870-128-1 has
plans for building a vacuum forming machine.
Subject: 2. foam surface treatment
Am looking for recipes for the treament of foam prior to painting. In
particular, I'm looking for a good recipe that fills cracks and voids
that is easily sanded. Other recipes/tricks would be appreciated.
Subject: Lighting (/lighting/)
Subject: 1. Where do I find PMX (GoldenScan,RS232) protocol info?
Steve Unwin has specs available at http://www.histon.demon.co.uk/
Subject: 2. Where do I find more info about DMX512?
The full spec itself 'DMX512/1990 and AMX192 standards' is available
from USITT for about US$26. See
http://www.culturenet.ca/usitt/publications.avail.html
There are also pirated copies of the spec floating around the net if you
look hard enough. US$26 isn't much though, and you can grab a copy of
'Recommended Practice' for US$8 at the same time, so get the real copy
from USITT
PLASA & USITT publish a book "Recommended Practice for DMX 512" by Adam
Bennette that discusses usage of DMX512. PLASA can be found at
http://www.plasa.org.uk/ and USITT at
http://www.culturenet.ca/usitt/publications.avail.html
Highend Systems have some DMX protocol info for Cyberlights,
Intellabeams & Studio Colors available at
http://info.highend.com/hes/DLDS/dmxprot.html
DMX protocol is discussed occasionally on comp.arch.embedded and
sci.engr.lighting . Also checkout the lighting control developers list
(see the mailing lists FAQ entry
Subject: 3. What's a 'Ghost Light'?
This is occasionally used as a synonym for 'ghost load' a lantern
connected in parallel with a stage-practical to ensure the dimmer has
enough load on it.
More usually it's a light on a pole left on-stage while nobody is about.
The practical advantages are that the last people out & first people in
won't fall in the orchestra pit in the dark.
The historical reasons for it's existence (gaslights acting as pressure
relief valves, keeping the ghosts away, keeping the ghosts happy,
ensuring the theatre never 'goes dark' etc.) are occasionally discussed
to death on r.a.t.s. - do a dejanews search if you're interested.
Subject: 4. What's the pinout for Socapex?
1 - live 1
2 - neutral 1
3 - live 2
4 - neutral 2
5 - live 3
6 - neutral 3
7 - live 4
8 - neutral 4
9 - live 5
10 - neutral 5
11 - live 6
12 - neutral 6
13 - earth 1
14 - earth 2
15 - earth 3
16 - earth 4
17 - earth 5
18 - earth 6
[Thanks Gareth g.hughes@zetnet.co.uk]
Subject: 5. What's the pinout for Lectriflex?
1 - live 1
2 - live 2
3 - live 3
4 - live 4
5 - live 5
6 - live 6
7 - earth
8 - earth
9 - neutral 1
10 - neutral 2
11 - neutral 3
12 - neutral 4
13 - neutral 5
14 - neutral 6
15 - earth
16 - earth
[Thanks to Gareth g.hughes@zetnet.co.uk]
Subject: 6. How do I make my own gobos?
First, do you really want to? You can make rough breakup gobos fairly
easily, but standard stock breakups are only a few dollars. If you have
specific artwork you want to make into a gobo then you'll need to make
it by etching.
You have three options, of which only the first two can be recommended!
1 Get it professionally etched. Your local lighting supply company
should be able to point the way to a company offering this service.
ROSCO make custom gobos, but their pricing and delivery time may
not be competitive with someone closer to you.
2 M&M make an etching kit in a briefcase called the M&M gobomaker.
This is available for hire from a number of rental companies
worldwide, or if you think you'll be making lots of custom gobos
you could buy a kit.
Contact www.mandm.co.uk (website); info@mandm.co.uk (email);
+44-171-284-2503 (phone); or +44-171-284-2503 (fax)
3 If you really like spending time and money and playing with
dangerous chemicals, follow the instructions below.
For abstract break-ups or very rough gobos any thin sheet metal will
work. Scrap printing plates from a newspaper printers work OK. I've even
seen gobos made out of flattened coke cans (tho' the thin aluminium
softens). Cutting a pattern is easy if you have access to a pillar
drill. The thin aluminum used for litho plates can be cut with sharp
craft knife.
For photo-etched gobos:
1 You need high contrast original artwork, with completely opaque
black areas.
* Computer graphics laser-printed onto transparencies works
well, artwork photocopied onto transparencies is OK
* The black areas must be completely opaque. Any holes or grey
areas can be filled in with a black spirit marker
* A product called 'Lasercolor' will bond to toner, making the
image more opaque
* Scotchcal 8007 reversal film, usually used for making
photoetched PCBs makes great artwork
* Surround the image with an opaque shape leaving the outline of
the gobo - that way the gobo will fall out of the blank when
etched
2 Choose and prepare the gobo material
* Brass, copper and aluminium are the possible choices.
* Stephen Lane recommends 0.2mm brass shim, available from
model shops or a non-ferrous metals dealer.
* Aluminium is cheaply available from scrap litho printing
plates from a local newspaper, or from a flattened drink
can. I've seen aluminium gobos soften within a few
seconds in 1kW lanterns
* Cut a blank an inch or two larger than the gobo you're making
* Clean the surface thoroughly, getting rid of any grease and
removing the oxide coating.
3 Photoresist
* Coat one side of the blank with a positive photoresist (such
as Electrolube PRP200).
* Coat the other side with a protective laquer (such as
Electrolube CPL200)
4 Fix the artwork to the blank
* Put the side of the artwork with the toner on it touching the
blank (this improves fine detail)
5 Exposure
* The blank needs to be exposed to 'enough' UV light to expose
the resist in the uncovered areas, but not enough to expose
the remainder
* The best way to expose it is to use a hobbyist PCB exposure
box. If you intend to do many gobos, or intend to make any
PCBs it's worth looking at one of these
* Fluorescent UV tubes are the next best option, with the
artwork fixed to the blank with four bulldog clips. This takes
50-90 seconds at a range of two inches
* Mercury vapour worklights and sunlight can be used, but aren't
recommended. The worklights produce a lot of heat, which can
damage the resist, and sunlight is a bit unpredictable.
6 Next develop the resist, using the relevant developer (eg
Electrolube PRD200)
7 Any holes in the resist can be touched up with a spirit marker or a
'resist touch-up pen' from the same supplier as the rest of the PCB
stuff.
8 Etching
* For brass or copper the best etch is ferric chloride. Ammonium
persulphate works too, but you have to be careful of fumes
given off, and heat produced can make the resist flake off.
* For aluminium one part hydrogen peroxide, one part
hydrochloric acid (what strength? -- SRA) to four parts of
water works well. This is a very corrosive mix. If you don't
know about safe acid handling precautions don't do it. Use
acid-proof gloves, apron and eye protection. Use glass, or
maybe plastic containers. Don't store unused etch, dilute it a
lot and dispose of it safely. Another reason not to use
aluminium for etched gobos.
* Keep an eye on it as it etches. If anything starts to etch
that shouldn't you can take it out of the etch, flush it with
water, touch up the resist with a spirit marker and drop it
back in the etch.
* Serious electronics hobbyists use small 'bubble etch' tanks.
These heat the etchant and blow bubbles through it. This gives
a faster and more uniform etch
9 Acetone, or whatever solvent the resist manufacturer recommends,
will strip off the resist and laquer
Loosely adapted from posts by Stephen Lane of Apollo Lighting, with
extra bits from David Gibson, Clive Mitchell and Steve Atkins.
Practice a couple of times on some scrap to get the exposure time
correct. The first time I use an exposure box I coat a piece of scrap
with resist. Then I cover most of it with a piece of foil and expose for
15 seconds. Then I move the foil down a half-inch and expose for another
15 seconds, and so on. Then when I develop and etch this test piece I
can see how each exposure time works -- SRA
The whole process of making brass gobos is very similar to making PCBs,
so hobbyist electronics books may be useful for more info and pictures
(Stephen Lane intends to make photos available on the web sometime
soon). The PCB FAQ, posted to sci.electronics or available at
http://www.ecn.uoknor.edu/~jspatric/faqs/pcb.faq is well worth a look.
Variations to this are the toner-transfer and direct methods
Direct etching is pretty simple. Rather than use photo-resist you simply
draw your pattern onto the blank with an etch-resist pen, or coat the
blank with laquer and scribe your design into it. Then you etch the
blank as described above.
The toner transfer method is popular for making simple low-tech PCBs.
I've never heard of anyone trying to make gobos with it, and the longer
etching time needed for gobos might make it difficult to get
toner-transfer to work well. Basically you photocopy the densest,
blackest artwork you can onto paper, or better, special toner-transfer
paper. Then you put the paper over the blank, toner touching the
(sandpapered clean) blank. Then you iron it with a hot iron, fusing the
plastic component of the toner onto the metal. The you soak it in water
to lift off the paper.
Toner-transfer instructions can be found at
http://clarc.phoenix.net/laserpcb.html
If anyone trys toner-transfer for gobos, please email me to tell me how
well it works.
In the UK all of the equipment and chemicals are available from Maplin
Electronics ( http://www.maplin.co.uk/ , full address elsewhere in the
FAQ).
The chemicals are available from Electrolube Ltd., Blakes Road,
Wargrave, Berkshire, RG10 8AW, +44 1734 404031.
Check the ads in any electronics magazine for local suppliers
Subject: 7. Dimming fluorescent tubes.
Subject: 8. Flicker effects - TV, fire, cinema.
Most programmable lighting desks have an effects unit with random and
regular flicker effects.
If you don't have an effects unit and you need a random flicker you can
try the classic fluorescent starter trick. Wire a bulb in series with a
fluorescent starter. It will flicker on and off at random, slowly for
the first 5 or 10 seconds, then a little quicker.It's worth buying the
proper bases for the fluoro starters, as their terminals don't like
solder! Note that the starters have a maximum rating of 40 or 60 Watts.
The on-off random flicker from a fluoro starter is a bit unsubtle on
it's own. Pair the flickering bulb with a bulb that's permanently on for
the best effect. (Steady blue and flickering white works well for
television, steady red and flickering yellow for a fire).
For a really top-notch fireplace, use a red bulb non flickering (but
possibly on a slow fading sequence) plus two flickering bulbs, one in
orange and one in yellow.
See 'flickering candles' under the /props/ section of the FAQ for
flicker dimmers and flickering bulbs.
Subject: 9. How do I get rid of spill (stray light) from my lanterns?
Fresnels tend to spill a lot of light. Always using barn-doors helps a
lot - close the doors so they're just touching the edge of the beam.
For some models of lantern an accessory called a "snoot" is available.
This looks like a top hat with a hole in the top, and sits in the colour
frame runners.
For profiles or PC lanterns many spill problems can be fixed with black
Cinefoil ( http://www.rosco.com/film_video/cinefoil.html )
Be careful about blocking too many ventilation slots on a lantern -
they're there for a reason.
Subject: 10. Which should I buy, ETC or Strand?
For a much fuller answer to this question from David Lawver
(dmlawver@facstaff.wisc.edu), Derek Smith (dmsmith@sdcc17.ucsd.edu),
Gareth Hughes (g.hughes@zetnet.co.uk), and Steve Bailey
(SBMTBIKE@worldnet.att.net) see the FAQ appendix at
http://www.blighty.com/ratsfaq/appendix.html
The executive summary:
* Both Strand and ETC have their supporters
* ETC have very knowledgable, helpful people
* The ETC Express is liked for many reasons, including
* Good engineering at a reasonable price
* Ethernet support
* Very nice firmware and UI, for moving lights as well as
dimmers
* Show swap compatibility with the expression
* The GSX has AMX support, but not AMX and DMX simultaneously, and is
in other respects not as nice as the express. And it costs more
* And most importantly, if you're considering buying a board rent or
borrow one for a show to find it's strengths and weaknesses
ETC have a web site at http://www.etcconnect.com/ . Strand lighting are
at http://www.strandlight.com/
Subject: 11. Keystoning slides for rear projection
I have to rear project from an acute angle and need to keystone the
image accordingly. What would be a good resource for this procedure? I'm
after both on-line and otherwise material.
Subject: 12. How do you light a 'Glitter-ball'
Having never used a one before, I need to light up a glitter ball (ball
with many mirrors glued on) to fill a school hall, however the lamps
avaliable to the school are not excessively bright. How can I achieve
this, ie: positioning of lamp, type of lamp, colour of lamp etc...
Subject: Sound (/sound/)
Subject: 1. What's the XLR pinout?
Well most manufacturers use pin 2 hot:
Pin 1 = Shield ground
Pin 2 = Positive balanced signal
Pin 3 = Negative balanced signal
Mnemonic: XLR = Shield,Live,Return
Looking into the female connector with the locking tag up top
right is #1, top left #2, bottom #3
___ ___
/ v \
| 2 1 |
\ 3 /
\_____/
But I've also seen pin 3 hot and heard of pin 1 hot, so check your
manuals.
Subject: 2. What is phantom power?
[Paraphrased from the excellent rec.audio.pro FAQ at
http://www.cis.ohio-state.edu/hypertext/faq/usenet/AudioFAQ/pro-audio-faq/faq.h
tml
]
Condenser microphones have internal electronics which require power. In
phantom power (DIN spec 45596) the positive terminal of a 48V power
supply is connected via 6800ohm resistors to both signal leads of a
microphone and the negative terminal to the ground connection
A dynamic or ribbon mic can be connected to a phantom powered circuit
without damage. The only risks are a shorted mic cable, or some old mics
with a centre tap - these will be damaged if connected to a phantom
powered circuit.
Subject: 3. How do I connect balanced and unbalanced equipment?
[Paraphrased from the excellent rec.audio.pro FAQ at
http://www.cis.ohio-state.edu/hypertext/faq/usenet/AudioFAQ/pro-audio-faq/faq.h
tml
amongst other places]
The correct way to connect balanced and unbalanced equipment is an audio
balance transformer
To connect an unbalanced output (typically on a phono connector from
some home audio equipment, eg a CD player) to a balanced input (almost
always an XLR connector). Connect the centre pin to pin 2 of the XLR
connector, and the ground ring to pins 1 & 3
To connect a balanced output to an unbalanced input is trickier. If it's
a floating (passive) balanced output you can connect pin 2 of the XLR to
the phono pin and pin 3 to the ring. If it's an active balanced output
then you may be able to XLR pin 2 to the phono pin and pin 1 to the
phono ring, leaving pin 3 unconnected. If that fails try connecting XLR
pin 3 to the phono pin, XLR pin 1 to the ring and leavin pin 2
unconnected. Both of these approaches may well cause distortion or more
noise.
Subject: 4. Music stands.
Ok, I've just changed the tube lamps in our running/music stand lights
for the umpteenth time. Does anyone recommend a better (i.e. longer
life) lamp for these units?
* Low wattage aquarium lamps
* 25W appliance bulbs
* EXIT lamps (from your local electrical supply house)
* 15W standard bulbs rather than tubular lamps (used with success by
several people)
Subject: 5. Sound effects CDs
The three main ranges of FX CDs in Britain are BBC, Digifex and Bits And
Pieces.
All are available from Canford Audio ( http://www.canford.co.uk/
Ultimate ( www.ultimate1.co.uk )do a budget library, 10 CDs for UKP50
Subject: Props and special effects (/props/)
Subject: 1. How do I ring an on-stage phone?
The Tele Q, made by CEI Inc, PO Box 51, Deborah, IA 52101 Tel: +1 319
382 0041, Fax: +1 319 382 0041 is one gadget to do this. Approximately
US$110-120. It's US$18 for a power supply, but batteries last a long
time.
Norcostco at http://www.norcostco.htm/ have it in stock for US$120 at
the time of writing
Maplin MPS, PO Box 77, Rayleigh, Essex, UK, +44 1702 554400 make a kit
called the 'Autoring', P/N LT19V. Maplin live at
http://www.maplin.co.uk/index000.htm - they list a number of overseas
distributors there.
Pricing anyone? It's an expensive call from New England.
19.95 (pounds sterling) in their 96/97 catalogue.
Jech Tech Inc, 13962 Olde Post Road, Pickerington, Ohio, 43147, USA
Tel: +1 614-927-3495, Fax: +1 614 927 3493
Sales & service : jectech@infininet.com
...make a small PCB module generating 180V pk to pk at up to 20 Hz,
ringing up to 5 REN (ringer equivalents). Frequency is adjustable for
non US phones. Requires 12V DC power supply. US$49.95 plus shipping and
handling. They have a web site at http://www.infinet.com/~jectech/
http://www.hut.fi/~then/circuits/telephone_ringer.html has general info
on ringing telephones along with several means of producing ring
voltage. Links to commercial equipment sources and to scratch built
plans as in the Wenzel link below
http://www.wenzel.com/pages/mystrylb.htm has complete plans for a phone
ringer providing ring voltage and cadence control, provisions for talk
circuit and audio input. It's in PDF format so you'll need Acrobat from
http://www.adobe.com or xpdf from your favourite archive. Looks like c.
US$20 component cost.
In the UK, phones are rung with 50V A.C., at 25Hz. If want to ring a
phone where the clapper oscillates between 2 bells, remove one of the
bells, and run it from a transformer giving 50VAC, 50Hz. If you want to
ring a more modern phone, a lot generate the ring frequency themselves,
which makes it easier. Get hold of a master socket (the type with the
surge arrestor, out of service resistor and a capacitor inside), and
apply 50VAC 50Hz to the terminals A and B, and the phone will sort out
the frequencies itself.
[Thanks to Murr Rhame for most of this info]
Abbagail Winters tells me that in australia, Telstra techs can often be
talked into giving a community theatre company a few of the old decadic,
rotary dial phones, a transformer (dc 28v?), and the necessary info on
pinouts to make a phone ring.
Subject: 2. Audrey II for Little Shop of Horrors
Where to rent the various Audrey2s needed for LSoH is a common question
on r.a.t.s. Here are some of the suggestions:
* All Dressed Up - Batavia, IL, USA
* MIKAN Theatricals - Hampton, NH, USA
* Davis Musical Theatre Company - CA, USA
http://www.mother.com/~dmtc/
* Scott Richardson - Midwest, USA srichardson@siumed.edu
* Billy Diamond - +1 914 455 3984 (pager)
* Ned Milne( adsnggm@bath.ac.uk ) - Bath University Drama Department,
Bath, England - 01225 826826
* nooz@voicenet.com
Plans are allegedly available from the publisher for US$65
Subject: 3. Stage Blood recipes
Edible
Karo syrup (light corn syrup), black-cherry Kool-aid powder and smooth
peanut butter
4 parts liquid glucose, 1 part water, chinese red food colouring
Ruby orange juice, with the bit strained out (sprays nicely)
Corn syrup, red food dye, a little blue & green food dye.
From murr@vnet.net:
MB2 Blood Formula
Flour Base:
7.5cc to 10cc plain all purpose flour per cup (250cc) of water. (7.5cc =
1/2 level tablespoon , 10cc = 2 level teaspoons) Mix flour into water
completely (no lumps) before heating. Bring to boil then simmer for 1/2
hour. Stir frequently.
Let cool before adding food color. Stir in any surface scum. Makes a
good base for stage blood. Slightly slimy. Fairly low surface tension.
Soaks and spreads well.
One cup batch of MB2:
1 oz (29cc) Red food coloring (Durkee (R) brand or equivalent) 1/8
teaspoon (.6cc) green food coloring (Durkee (R) brand or equivalent) Add
flour base described above to a total of one cup (250cc).
This is both much more realistic and simpler than the old Karo (R) corn
syrup, Hershey's (R) chocolate syrup and food coloring based formula.
There is no sugar and very little food in the MB2 formula so it's
probably less attractive to insects. Shelf life is fairly short (days)
at room temp. Does not go rank but ferments a bit and looses viscosity.
I have not tested refrigerated or frozen storage. This formula will
temporarily stain skin. Seems to wash out of cotton cloths OK.
Inedible:
Adding a little washing-up liquid to any of the above may make it easier
to wash out of costumes.
Adding blue washing detergent has been suggested - it makes the blood
easier to wash out, and darkens the blood. Be careful of this, washing
detergent can cause severe allergic reactions.
Commercial Stageblood
(From Rich Williamson of Pierre's Costumes, http://www.costumers.com/
NJ, USA, 1-888-PIERRE1)
Ben Nye
Best all around blood. Flows very well. Color is deep and shows up well
on video or film. A little too dark for black actors. Moderately
washable. Bonus: Edible, and mint flavored. Also available in Thick
blood (excellent) and dried scab (browner and older looking) Ben Nye
also has a full line of product in his Moulage line...(for EMT and
Disaster training) Geleffects can creat great wounds without messing up
clothing (product is made ahead of time and is dry once used, you can
spray glycerine to "freshen" or moisten it). He also provides a great
product. Dried blood powder. It is a very economical way to go...you can
splash it all around or stain clothes with it...designed to simulate
horrific crash scenes in emergency training exercises.
Mehron
The worst on the market....too light....too runny...looks like watery
strawberry pancake syrup. Don't waste your time
Kryolan
Excellent products...they have blood that dries to the touch (great for
clothes) Eyeblood (cry tears of blood)...their film blud is great for TV
and video...it has a yellow pigment in it that reflects nicely under
lights.it also smears very realistically. Film blud is available in
arterial (light color) and venous (darker). Frankly they have many more
products...they are the most comprehensive carrier of blood...I just
don't need the others...but I can get them if someone needs them.
Reel
Fred has the best bloods on the market. He is a little know secret. He
has been a make-up artist for the last 30 years. He works on major first
run movies. His blood is available in "original" (great bright color,
washable, runs well, great all around blood for most scenes and skin
types) "Lung" (brighter for either gruesome spurting scenes, or use with
darker skinned actors. Bubbles very well for gushing wounds), and aged
(darker for that "I cut myself 15 minutes ago and it hasn't stopped
flowing yet" look. He also provides thick blood. Fresh (great brush
burns and scrapes...stays in place), aged (older scabby look) and old
dried (dark brown look) ...mixing the 3 together in appropriate streaks
and blobs makes the MOST realistic looking wounds for TV and Film
(BTW Reel is the best source for custom tattoo painting systems. It is a
cross between real tattoos, stencils, and an alcohol based painting
system. There are over 5000 styles avail. ranging from gang to prison to
biker to tribal. They can't be discerned from real ones up close...even
when you rub on them)
The most washable of all bloods is Reel
Subject: 4. How do I hang an actor?
The general agreement of the group is that you don't. You get a
professional to do it. Someone who's done it before and has the
insurance to prove it.
Please do a usenet search before asking this question on r.a.t.s. - it
usually leads to a couple of crackpot answers, the odd reasonable
looking answer and a whole stream of the reasons why you shouldn't do
it.
In most situations you can get away without the effect with some
creative staging and lighting.
Subject: 5. Flickering candles
Rosco ( http://www.rosco.com ) do some reasonable nine volt candles
Rhett Bryson recommends Candle Lite Unlimited for 9V powered candles :
Distributor:
City Theatrical Inc.
752 East 133rd. St.
Bronx, NY 10454
718-292-7932
718-292-7482 (fax)
http://www.citytheatrical.com/
Manufacturer:
Candle Lite Unlimited
2335 University Avenue
San Diego, CA 92104 USA
Phone/Fax: (619)280-2493
Pager: (619)685-0801
Contact: David C. Johnson
Some speciality flicker dimmers are available from
RA Gray, Division of Communications Company, Inc.
9181 Chesapeake Drive
San Diego, CA 92123 USA
Phone: (619)560-4162
Fax: (619)560-1923
Email: RA_Gray@CompuServe.com
Contact: Kevin Cutter
I've seen one home-made technique that's simple and works well:
Get a real candle & drill out space for a 1.5V AA battery inside. Take
two low voltage light bulbs. Carefully smash the glass capsule of one of
them. Connect them in series (parallel?) and mount them at the top of
the candle.
As the actor moves around stage the air moving past the bare filament
varies it's resistance, making the other bulb flicker, dimming in the
breeze.
If anyone's used this and remembers the details drop me a line -
ratsfaq@blighty.com
TCI have a more complicated approach at
http://www.etec.org/tci/howtos/electric_flame.html
Scott Keszler ( keszler@rrnet.com ) of SRK Consulting (
http://rrnet.com/~keszler/ , Tel/Fax: 1-701-234-9150) makes candles
similar to candle-lites, with three tiny bulbs embedded in a tinted
plastic 'flame' driven by a flicker circuit.
Scott builds to order, and will sell you the mechanism and flame for $16
or custom built candles (with built-in or external switch, battery or
external 9V power etc.) for $20. He can also provide spare flames and
bare PCBs. There are pictures and more information available at
http://rrnet.com/~keszler/candles.html
Lighting Technology Group ( www.lighting-tech.com sell a range of
Electronic Flicker Candles. I have not used these and have no idea how
good they are...
Subject: 6. Masks?
Norcostco have some Mask info available at
http://www.norcostco.com/no03004.htm
Subject: 7. Cutting styrofoam or Polystyrene
For small parts where finish isn't critical a bread knife is pretty
good.
A hot-knife cutter is the easiest way to cut these foams, and gives a
good smooth finish. A typical hot knife is a length of wire stretched in
an insulating frame with a constant current passed through it. The hot
wire melts it's way through the foam.
There are some health issues with polystyrene: It gives off styrene
monomer which is listed as a weak animal carcinogen.
MSDS exposure levels are as follows:STYRENE
PEL (OSHA) : 100 ppm, 8 Hr. TWA 200 ppm, Ceiling 600 ppm - 5 Min.
Max.
TLV(ACGIH) : 50 ppm, 213 mg/m3, 8 Hr. TWA, Skin STEL 100 ppm, 426
mg/m3
Most foams probably give off fumes when heated, so always make sure you
have good ventilation.
Another good way is to use a electric carving knife. The same kind you
use on a turkey at Thanksgiving. This works best on foam rubber.
Subject: 8. Toffee glass / Candy glass bottles?
By weight mix 7 parts sugar, 3 parts corn syrup and 2 parts water. Add
food dye to colour, or use brown sugar for brown glass. Heat until it
melts/dissolves at 225F or 108C. Let it cool - as it starts to harden
pour it into the mould, then tilt the mould to cover all the surfaces.
Monta Elkins found that this didn't work at 225F, but 300F worked well.
Also, use the clearest corn-syrup you can find, as the slight yellow
colour shows in the completed glass. Adding vanilla essence makes the
failures taste good enough to eat.
Dave Porter suggests covering a bottle with a carefully smoothed layer
of foil, then many more layers of possibly crumpled foil. Cut this in
half and use it as a slip mould for toffee glass bottles.
Be wary of hot sugar syrup. It hurts. Use gloves.
Toffee glass is hard to get right and incredibly messy when it goes
wrong. A number of people have recommended using casting resin to make
breakaway glassware instead.
ANA have been recommended for breakaway bottles, furniture etc.
ANA Special Effects
7021 Hayvenhurst Ave.
Van Nuys, California 91406
(818) 909-6999
Another source for breakaway resin (ordinary polyester or epoxy resin
isn't any good for this) is:
Zeller International
Main Street
Downsville, NY
USA 13755-0375
tel 607-363-7792
They have a catalogue and price list of their breakaway and other SPFX
products.
Subject: 9. How can you make realistic whip marks on an actors back?
I made whips of sisal rope with the rope strands separated
(cat'o nine tails), coloured them a deap leather brown and
then saturated the rope strands with Doc Martin Cherry Red
boot polish where the strands hit the actor's back. The boot
polish washes off both the set and actor and the effect did
not splatter blood on other actors
Subject: 10. Flying People
Generally you should not attempt this yourself.
Aside from possible insurance/liability problems
(applicable more to US residents than the rest of the
world) you will find that the cost of having the
appropriate harnesses and suspension gear made will
be greater than the cost of hiring in professionals to
do it for you.
Under no circumstances should you attempt to modify
climbing equipment or parachute harnesses to use for
this purpose - it isn't worth the risk.
Ordinary tab tracks have also be suggested for suspending
people from - if you have any sense don't try that either.
OK the weight of the tabs may be greater overall than
that of a person, but the load is spread along the whole
length of the track, not just at one point
Subject: 11. Spliffs? Joints? Reefers? Marijuana cigarettes?
Most places the local authorities get upset if you use these on stage,
but there are shows where you need them. Some substitutes from
r.a.t.stagecraft:
* Herbal cigarettes, such as 'Herbal Gold' ("pleasant, incense-like
aroma reminiscent of a Grateful Dead concert")
* Tobaccoless cigarettes, such as 'Honey Rose' or 'Kickum'
* Joints rolled from catnip (or catnip tea) ("same plant group as
marijuana, so realistic smell; didn't make the actors sick")
* Ginseng cigarettes.
* Oregano (?)
* Nettle tea mixed with some mild tobacco ("It was so realistic the
narcotics division came backstage after the show...")
Make sure your actor knows how to roll a spliff. If they don't know how,
get one of the rest of the cast to show them. Someone will know. A
significant part of the audience knows exactly how to roll a spliff, so
you want to ensure the show looks realistic to them.
Subject: 12. Smoke, fog, haze, CO2, LN2? What's the difference?
There are at least five different sorts of smoke/fog/mist used in
theatre
Pyrotechnics
These are the only way of producing a truly coloured smoke. The dyes
used will mark scenery or drapes nearby. Pyroflash cartridges produce a
jet of deeply coloured dense smoke for seven or thirty seconds when
fired, and I think Stage FX pods produce smoke for about twenty seconds.
Flashpots, gerbs and any other pyro effect will produce a lot of white
smoke in addition to the main effect. All pyro safety precautions must
be observed, See the FAQ entry for pyrotechnics for more information.
Smoke guns
Smoke guns feed a liquid ('smoke juice') into a heated chamber. It
vaporizes and produces a jet of dense white smoke.
Cheap smoke machines tend to use a pressurised canister of juice, whilst
the more expensive ones use an electric pump to feed juice from an
external tank into the chamber. The electrically pumped machines tend to
give a lot more control, and the juice is a lot cheaper than the
pressurised canisters. Pressurised canister machines can be plugged in
for a while to get the block hot, then can be unplugged and moved around
the stage and still work. (There is one rechargable pumped gun that can
be used cordless, the Scottie)
The smoke will hang in the air for a time, depending on the ventilation
of the building and the formula of smoke juice used (clubs generally use
economical long lifetime smoke juice, whilst theatres tend to use short
lifetime juice for more control).
The dense jet of smoke is a bit obvious in some contexts. One answer is
to deliver the smoke through flexible ducting. Most (all?) machines have
an adapter available that makes it easy to connect ducting to the
machine. You can buy expensive black flexible ducting from the smoke gun
supplier or use cheaper tumble-dryer exhaust ducting.
Another approach is to control the output of the gun. Most pumped guns
have a control that lets you dribble smoke out of the gun at varying
rates. One or two (aimed at the club market, presumably) have optical
sensors available to maintain a constant density of smoke in a space.
Smoke from a smoke gun can't be coloured, but the dense white smoke
takes colour from lighting well.
Haze fluid is available for some smoke guns. This produces a very pale
smoke, quite unlike the normal dense smoke. It's not as obvious as
normal smoke, until you shine light through it. It's nowhere near as
good as cracked-oil haze, but you can use it for some of the same
effects for a fraction of the price.
Don't try and make your own smoke juice or your own smoke machine. Don't
try and use a garden fogger as a smoke gun. Don't use smoke juice in a
machine it isn't recommended for. Using the wrong block temperature/fog
juice combination can produce irritant, carcinogenic or toxic gasses.
Flavoured smoke juice is available, often at a discount over normal
juice. Don't use it. If the cast don't lynch you your crew will. Pina
Colada smoke juice is particularly nasty.
Allergic reactions.
Some actors will believe that smoke will cause them to cough (as will
the audience). In my experience this is pretty much psychological.
Newbie actors will choke for a while, but people who've worked with
smoke before won't notice it. Ensure your cast get a chance to rehearse
with smoke before the dress. Smoke will dry the throats of singers or
woodwind/brass players and should be avoided or minimised if you can.
Smoke chillers.
If you chill smoke using solid CO2 you can produce a low-lying smoke.
It's not as low to the floor as CO2 smoke, and will drift up as people
move. It's a very nice effect, particularly for nighttime marsh or docks
scenes. Not bad for 'victorian london' too. I've never used a commercial
chiller but have had very good results with homemade chillers, made from
a large box with an inlet at one end, an outlet at the other and baffles
inbetween. Shelves made of wire mesh hold the dry-ice that chills the
smoke. I've seen people pack smoke ducting with dry-ice for this effect,
but it doesn't work as well.
Dry-ice or CO2
A dry-ice smoke kettle is a sealed plastic box with electric heating
elements in the bottom, and a metal basket that can be raised or lowered
(think deep-fat dryer). The lower half is filled with water; brought to
near boiling by the electric elements. The basket is filled with
dry-ice. When the smoke is needed the basket is lowered into the hot
water. The dry-ice sublimes and produces a very dense white water-vapour
smoke. This is forced out of a nozzle on the front of the kettle.
These consume a lot of power, 7 or 8 kW for a medium sized kettle.
Dry-ice smoke is very dense and low-lying.
'Jekyll and Hyde' effects can be produced by dropping dry-ice pellets
into a beaker of hot water.
Dry-ice can be bought cheaply from frozen food distributors, or
'borrowed' from university physics departments. It can be stored in a
polystyrene box or coolbox for 2-4 days. Make sure that the coolbox
isn't airtight - the CO2 buildup can blow the lid off.
Liquid nitrogen foggers
Liquid nitrogen smoke machines work by spraying a fine mist of liquid
nitrogen. This drops the temperature of the air and causes atmospheric
moisture to condense into a low lying, natural looking fog
LN2 fog is common at fixed installations, such as theme parks, but can
be useful on stage.
Interesting Products answer some LN2 fogger questions at
http://www.interesting-products.com/linkpg.htm
Cracked-oil foggers
These produce a nearly transparent haze that scatters light well. Beams
of light are clearly visible in the haze, but the haze itself isn't
visible. A beautiful effect, but I've never been able to afford to rent
one.
Subject: 13. How do I clean my smoke machine?
Some Rosco smoke machines have an air inlet for compressed air cleaning.
Most manufacturers recommend flushing the machine through with distilled
water occasionally, just run with distilled water instead of smoke fluid
(this isn't for compressed canister guns...).
Rosco's instructions for the 1500 say to run the unit without fluid
until nothing comes out, then run distilled water through it, and again
to run it until it nothing comes out before putting it away. (When
storing the unit, it should be dry inside to prevent corrosion and
"gunking up".)
If the output is weak, sputtering or not straight you may need to unclog
the nozzle. Unbend a large paper clip and use it to ungunk whatever is
in the nozzle hole. DISCONNECT THE MACHINE AND ALLOW IT TO COOL FIRST!
Check with your manual, or your local dealer.
Subject: 14. How do you make smoke rings?
From Stephen Mayotte, smayotte@mmsl.com:
I built a gadget that does this last year. It's called a "puff box".
There's really nothing to it. Start with a good sized cardboard box--
say 2' by 2' by 2' for example.
Remove 1 side of the box and replace it with some sort of flexible
membrane. I used 4 mil poly sheeting. Some sort of rubber would be much
better.
On the side opposite the membrane, cut a round hole in the middle.
Experiment with the size. I made mine 4" because I needed to charge the
box with a F-100 smoke machine. The hole for a Rosco fogger would be
smaller.
Anyway, fill the box with smoke. Whack the membrane and ta-dah! It's
really easy. Everyone who sees it figures you must be a genius.
You can make a small flap to cover the hole. That way, you can fill the
box up and not lose your smoke right away. You should be able to get at
least 1/2 dozen good rings before needing to refill.
Subject: 15. Pyrotechnics - explosions, flashes, smoke
Safety
* Always use professionally made pyrotechnics, don't improvise them
(not even flashpowder)
* Use a commercial control box, with a removable safety key
* Never smoke while handling pyrotechnics
* Unpack the pyro in a safe place, away from anything flammable
* Store pyro in it's packaging until you use it
* Never put pyro in your pockets
* Turn the control box off and take the key with you while loading
pyro
* If the pyro is a cartridge designed to be used in a pod, use a real
pod, don't just twist wire to the terminals
* Ensure that each pyro position can be clearly seen from the control
position
* Never fire a pyro effect unless you can clearly see the area is
clear of cast and crew
* Always wear safety goggles or a face shield when loading pyro.
* Always clean your flashpots before loading them. (reduces
"shrapnel")
* Never try re-firing a dud. Soak it in water and destroy it by
tearing it to pieces.
* Never dispose of destroyed pyro duds in the trash; use a "safe
can".
* Never fire pyro over an audience.
Two manufacturers of theatrical pyro are Le Maitre (
http://www.lemaitrefx.com/ ) and Jem (no web site, but pictures and
descriptions at http://www.midnight-design.ltd.uk/spyro.htm ).
Le Maitre's PyroFlash system and Jem's Stage FX are similar in many
respects. They have a control box, a number of 'pods' connected by cable
to the control box and a range of pyro cartridges that can be plugged
into the pods. Effects cartridges include
* Flash - a bright white or coloured flash and puff of smoke
* Starburst - similar to the flash, with a spray of silver or gold
stars
* Smoke - Dense white or coloured smoke, burning for tens of seconds
* Fire - intense coloured flames and white smoke
* Whistler - Loud screaming noise
* Glitter or confetti - Loud bang and a spray of confetti or glitter
Other effects include gerbs, maroons and confetti cannon.
Gerbs spray white or gold stars in a 30+ foot jet for a few tens of
seconds. These are spectacular for outdoor performances, but think very
carefully before trying to use them indoors - they spray white-hot
fragments a long way.
Maroons come in a range of sizes. The smallest ones make a very loud
bang. The larger ones are very, very loud. Maroons should only ever be
fired in a bomb tank - this is a heavy metal tank with an open top
covered with a metal mesh. When fired they will throw fragments out of
the top of the tank. Always put up clear warning notices near the bomb
tank, ensure everyone knows you're using maroons and ensure no-one is
near the tank when you fire the maroon.
A confetti cannon is a short cannon which uses a maroon to fire confetti
(or glitter or fireproofed leaves or...) into a huge swirling cloud.
Subject: 16. Refilling beverage cans
I'm trying to empty a beer can and refill it with a less inebreating
liquid. If I use water, I can reseal holes punched in the bottom with
tape. If I try to use a carbonated beverage, it leaks. Any suggestions?
If you can find a can of soda or another beverage which just fits inside
your beer can (many do), you can cut the top off the beer can and slip
the other unopened can inside. This has the advantage of allowing the
actor to pop the top on the "beer". The beer can top has to be cut off
BELOW the rolled rim, so that the cut edge will slide up under the rim
of the outer can. Be sure this edge is flat and as smooth as possible.
You'll still probably want to wrap a strip of clear tape around the
whole edge for actor safety.
Subject: 17. Welch vacuum forming pump
Does anyone have some info or a manual for a Welch Duo seal 1405 model
vacuum pump which I have recently purchased for a shop made vacuum
former.
Or any advice on the construction of a small vacuum formed with about a
200ltr
reservoir capacity to pull a sheet about 1.2mt x 0.75mt.
Subject: 18. Berry Stains
How do you simulate berry stains on clothing and hands with a material
that can be washed out between performances?
Subject: 19. How do you cut mirror?
I am the Asst Manager and Don Quixote for Man of La Mancha and i am not
sure on how to make the "Knight of the Mirrors" shields. I already have
the basic shield done(made from foam board) and now i have the problem
with the mirror part. Any ideas please contact me ASAP!!!!!
Macom4869@aol.com
Subject: 20.
Subject: CAD and other software (/cad/)
Subject: 1. Are there any lighting symbols freely available for
download?
There are some in DXF format at the following sites
* http://waapa.cowan.edu.au/lx/ (lots of good stuff, including a lot
of CAD symbols in both DWG{AutoCAD} and DXF format.)
* ftp://maurice.cph.uh.edu/informat/cph/
Subject: Other miscellaneous stuff (/misc/)
Subject: 1. How do I contact ArtSearch?
ArtSEARCH
Theatre Communications Group
Attn: Order Department
355 Lexington Ave
New York, NY 10017
Tel: +1 212 697 5230
Fax: +1 212 983 4847
email: orders@tcg.org
Subject: 2. What's a Green Room?
It's the area backstage where actors and dressers lurk during the show.
Why's it called a Green Room?
Many, many reasons have been suggested. Please don't bring this up
unless you have a definite cite for the origin of the phrase.
All that's agreed upon is:
The first known written use of the term is in 1701, and from the context
the writer (English owner-actor/playwright Colley Cibber 1671-1735, Poet
Laureate) expected people to recognise the term, so it was probably in
common use by the end of the 1690s.
Most lexicographers have concluded that the term did originate from the
colour the early greenrooms were painted, but no-one has any firm
reasons as to why they would have been painted green.
[Thanks to Spence Porter sporter@cat.nyu.edu]
There's also a suggestion it may be a corruption of 'scene room' or
'screen room' - a room where scenery was stored.
Some of the other (unsupported) reasons for the name that have been
suggested are:
* Because the plays originally took place outside on the village
green.
* Because the artificial grass (green carpet) was stored there.
* Because the green was soothing to actors eyes (after they had come
off from performing in front of limelight)
* Because limelight has a green tint to it, so it made sense to apply
makeup in a room with a green tint
* It was where the shrubbery used on stage was stored, and the plants
made it a cool comfortable place
* The 'green' was jargon for the section of the stage visible to the
public, so clearly the 'green room' was the room nearest the stage.
(I like this one, but I haven't seen a cite for it yet.)
* The room was walled with green baize as soundproofing, so actors
could practice their lines.
Subject: 3. Why are stages painted black?
To reduce reflections of stray light. They should be matt black, rather
than gloss black to do this successfully.
Subject: 4. Teasers & Tormenters
What is the origin of these terms?
Subject: Other resources (/other_resources/)
Subject: 1. Are there any related mailing lists?
Stagecraft
All aspects of stage work - contact stagecraft-request@inquo.net
THEATRE
To subscribe send email to LISTPROC@lists.princeton.edu with one
line in the body of the message 'SUB THEATRE Your Name'
f-costume-digest
Fantasy costuming - design and construction of all sorts of
'unusual' costumes. To subscribe, email majordomo@world.std.com
with the words 'subscribe f-costume' in the body of your message.
h-costume
Historical costume design from the Bronze Age to the mid 20th
century. Contact h-costume-request@andrew.cmu.edu
exhibitionists
Cinema workers and projectionists. If you're not a projectionist,
this probably isn't for you. Contact
exhibitionists-request@jvnc.net
light-dev
People developing lighting control hardware or software, those
interested in other theatrical control and automation are also
welcome. See http://goodstuff.prodigy.com/Lists/light-dev.html
Show-Fire
The Show-Fire mailing list is for the discussion of special effects
on stage or screen. Contact murr@vnet.net mentioning Show-Fire
Theatre-Sound
Sound for musicals, plays & live performance in general.
Subscribe by sending email to listserv@listserv.aol.com with the
text ' subscribe theatre-sound Your Name ' in the body of the
message.
Pro-Audio
A moderated list for professionally oriented audio discussion. To
subscribe send a message containing the single word 'subscribe' in
the body of the message to pro-audio-request@pgm.com or to
pro-audio-digest-request@pgm.com .
Stage Combat
A forum for folks involved in theatrical stage combat to discuss
the various aspects of the art. Send email to
majordomo@mattress.atww.org with the phrase 'subscribe
stage-combat' in the body of the message (or the phrase 'subscribe
stage-combat-digest' to get the digest version)
Subject: 2. What are some good books?
PLASA list a number of books, with brief descriptions
and ordering info at http://www.plasa.org.uk/techbook.htm
Effects for the Theatre by Graham Walne, ISBN 0-89676-136-3 US$25.
How to build flaming torches, flash pots, scissor lifts, colour
changers, gobos and lots of other stuff.
Sound Design in the Theatre by John Bracewll
ISBN 0-13-825167-3, Prentice-Hall. Out of print.
Subject: 3. What magazines are there?
Lighting and Sound International
Great mag, my favourite. Contact information, online subscriptions
(visa/amex/MC/switch) and selected articles are available at
http://www.plasa.org.uk/publicat.htm . UKP50/yr in the UK, UKP65 or
UKP90 outside the UK
Lighting Dimensions
Recomended by Bill Staines. Check out their web site at
http://www.etec.org/ld/ . For subscriptions contact ldsubs@etec.org
(US$29.95 for 11 issues, US only) or by mail LIGHTING DIMENSIONS,
32 WEST 18 ST, NEW YORK, NY 10011-4612 or fax +1 212 229 2084
(Canada US$40.95, rest of world US$57.45 surface or US$79.45 air).
Payment by cheque in US dollars or some other currencies (including
sterling) or by credit card - email for details.
Theatre Crafts International (TCI)
Formerly Theatre Crafts. Recomended by Bill Staines. Check out
their web site at http://www.etec.org/tci/ . For subscriptions
contact tcisubs@etec.org (US$24.95 for 10 issues, US only, AmEx,
Discover, Visa, Mastercard) or by mail to TCI, 32 WEST 18 ST, NEW
YORK, NY 10011-4612 or fax to +1 212 229 2084 (Canada US$34.95,
rest of world US$49.95 surface, US$69.95 air). Payment by cheque in
US dollars or some other currencies (including sterling) or by
credit card - email for details.
Connections, Australias Entertainment & Technology Monthly
Web site at http://www.conpub.com.au . A$39.50/yr in Australia,
A$70 Asia, A$95 USA, A$100 UK & Europe. To subscribe email
mail@conpub.com.au and they'll call you back for credit card info
Dramatics
Web site at http://www.etassoc.org/dram-mag.html . Educational
theatre magazine published nine times a year. US$18/yr.
CineFex
Cinema effects, published quarterly. US$26/yr in USA, US$36
surface/US$46 air elsewhere. 800-434-3339, Fax 909-788-1793.
CineFex, PO Box 20027, Riverside, CA92515, USA.
Subject: 4. Any other online resources?
Jon Primrose maintains a very complete glossary of stagecraft terms,
acronyms and jargon at http://www.ex.ac.uk/drama/tech/glossary.html
The historical costuming FAQ can be found at
http://www.jcave.com/~dybitter/faqs.html
The rec.audio.pro FAQ can be found at
ftp://rtfm.mit.edu/pub/usenet/rec.audio.pro/
There's a list of stagecraft resources at
http://www.yahoo.com/Arts/Performing_Arts/Theater/Stagecraft/
The stagecraft list archives at
http://www.ffa.ucalgary.ca/cgi-bin/wais-stgcrft.pl have a good selection
of info
The Society for Creative Anachronism have a lot of useful information
for historical costuming, props and production at
http://www.pbm.com/~lindahl/arts_and_sciences.html
The page for costuming info is http://users.aol.com/nebula5/costume.html
Theatre Crafts International have a good selection of tips and howtos at
http://www.etec.org/tci/howtos/howtos.shtml
Subject: 5. Which newsgroups carry Stagecraft related material?
alt.stagecraft
The original stagecraft newsgroup. This was supposed to be replaced
by rec.arts.theatre.stagecraft but like many alt.* newsgroups it
refused to die. alt.stagecraft is lower traffic than r.a.t.s..
There are often interesting threads on alt.stagecraft that don't
get crossposted to r.a.t.stagecraft, so it's well worth reading
both
rec.arts.theatre.stagecraft
The 'official' stagecraft newsgroup. Lots of noise, but lots of
signal too. Discussions are mostly about set, props, lighting and
sound but any backstage topics are welcome.
net.theatre.stagecraft
The Usenet2 stagecraft newsgroup. Pretty much the same charter and
content as rec.arts.theatre.stagecraft but as part of Usenet2 it
should be nearly free of spam. See
http://www.blighty.com/nettheatre/ for information on how to get
access to it and some posting rules
rec.audio.pro
A lot of good stuff here. Most people are discussing studio
recording rather than sound reinforcement, but there's a lot of
overlap. At the moment it's swamped with 'for sale' ads (so it's a
good place to find second-hand equipment....) but it will hopefully
split, adding a .marketplace subgroup sometime soon.
sci.engr.lighting
Primarily for architectural lighting professionals, but you can
occasionally pick up some really good ideas.
alt.pyrotechnics
Just one word. Don't. Look at rec.pyrotechnics instead.
rec.pyrotechnics
There are a lot of very knowledgable readers lurking here, and a
lot of useful information, particularly about making your own pyro
(and why you shouldn't). Most of the Kewl Bomz crowd get squashed
fairly rapidly.
rec.org.sca
I'm not even going to start trying to describe the Society for
Creative Anachronism, I'll just say they're a nice bunch of unusual
people and as a group they probably know more about historic and
pseudo-historic costuming than anyone else. If you're a costumier
or you do props it's well worth lurking here, if only to grab ideas
and commercial contact info. (Also, if you need good, really good,
historical costumes and are prepared to pay for them, some SCA
members do commercial work.) rec.org.sca is a group with it's own
rules, more so than many. If you're not an SCA member yourself you
should lurk for a while before even thinking about posting a polite
inquiry.
rec.crafts.textiles.sewing
Lots of general sewing stuff - worth a look for a costumier
rec.woodworking
Well... It's about woodworking and woodworking tools. It may be of
interest to the occasional setbuilder.
comp.cad.autocad and comp.cad.microstation
If you use one of the big two CAD tools these groups are a great
support resource.
sci.electronics.*
Electronics design and finding odd components
rec.arts.dance
There are occasional relevant threads, but it's a very high traffic
group with very little of interest to designers, or even
choreographers.
Subject: Show production, tour management and arts management
(/production/)
Subject: 1. What about copyright?
Copyright is an issue with most shows. Rights to the show itself, the
music used in the show, any images used in the show (even posters used
as set dressing).
Terry Carroll maintains the copyright FAQ and a lot of copyright
resources and references at
http://www.aimnet.com/~carroll/copyright/faq-home.html
Subject: 2. Saving money on posters, flyers, programs.
Five things cost money when getting stuff printed:
* Paper quality
* Number of colours
* Number of different things needing printing (posters, flyers etc.)
* Amount of work the printers have to do
* Urgency
It's generally worth using decent paper if you can - the posters and
flyers will look much more professional. If you're on a really tight
budget then black printed onto a cheap coloured paper is better than
nothing.
Each impression (colour) costs money. Two or more impressions costs a
lot more than one impression. Black tends to be cheaper than colour,
particularly for a single impression poster.
Posters printed black-on-white, then hand coloured with water-colours or
touches of highlighter pen can look very effective if they're planned
carefully.
If you need posters and flyers printed consider trying to put one poster
and two flyers on a single standard paper size, using the same colour
impressions. This means the printer can put a single run through the
press and cut it apart afterwards. This can give flyers almost for free.
The less work the printer has to do, the cheaper things will be, and the
more co-operative the printer will be the next time you use them.
Prepare everything yourself. Borrow a machine with a good desktop
publishing program and transfer your design onto it. Talk to your
printer and find out exactly what format they like - most want
camera-ready (full-size) copy, one original per impression. One thing to
check with them is how much to flare each impression (to avoid gaps
between colours).
If you're a perfectionist or you do much graphic design try and get hold
of a PanTone swatchbook, so you can define exactly the colour you want.
Urgency. Order stuff early. Even if it looks like the price will be the
same a week before the show as two months before the show. If you get
camera-ready copy to the printer early they'll be more likely to give
discount, either this time or next time. They'll also be much more
sympathetic in the future when you *really* need a poster in 24 hours.
Subject: 3. 'Net access while touring
Check http://www.thelist.com/ . Anyone charging 10-15 cents (or local
equivalent) for their freephone (1-800, 0800 etc.) number is a very good
deal compared with hotel long distance rates. If approached properly,
explaining that you're going to be spending a lot of money on room
service and bar, many hotels will waive the per call charge on local and
freephone rates. (Explaining this as wanting to call local business
partners, to whom you'll recommend the hotel, rather than as ISP access
might be a good move).
Big national ISPs tend to have near 100% national coverage. In the US
netcom/AOL are a good deal here, despite their other problems. In the UK
(and Netherlands now?) Demon are hard to beat.
[All disclaimers, etc.]
Subject: 4. Directories and Yearbooks
United Kingdom
British Performing Arts Yearbook
Rhinegold Publishing Ltd, 241 Shaftesbury Avenue, London WC2H 8EH
Tel: (+44)171 333 1721. Fax: 333 1736
100730.3531@compuserve.com
Extremely comprehensive directory covering London, England, Wales,
Isle of Man, Channel Islands and Northern Ireland. Full technical &
administrative details on over 1500 performing arts venues of all
types & sizes; details of companies of dance & drama; orchestras &
ensembles from classical to light classical music; performing arts
festivals; support organisations; local authorities; arts councils;
consultancies & trade firms (35 categories). Indices on type of
performing arts venue, audience capacity, company category,
companies within regional arts board area, etc. Venue information
also contains brief history of building plus details of any
church/concert or cinema-type organ (Wurlitzer, Compton, etc) in
the building. 1998 edition out in January 1998.
Irish Performing Arts Yearbook
Rhinegold Publishing Ltd. (See above)
Covers Northern Ireland (repeat of section in British Performing
Arts Yearbook) and the Republic of Ireland. Last edition 1996
Now property of Derry & Sheena Barbour, 43, Cleveland Road, Barnes,
London SW13 0AA. UK. Tel: (+44) 181 876 6093
thespis@cix.compulink.co.uk
British & International Music Yearbook
Rhinegold Publishing Ltd. (See above)
Directory of venues, schools, orchestras, musicians, etc involved
in the UK Classical Music scene.
British Theatre Directory
Richmond House Publishing Company Ltd.
9/11 Richmond Buildings, London W1V 5AF
Tel: (+44) 171 437 9556. Fax: 287 3463
Covers much of the same ground as the British Performing Arts
Yearbook, but not in such detail.
The White Book
The White Book, Bank House, 23 Warwick Road, Coventry, Warwickshire
CV1 2EW
Tel : (+44) 1203 559658. Fax : 252241
Covers the Entertainment Industry in depth, but more on the
variety, recording, and "pop" side than on serious Theatre. Venues,
Trade Firms, Acts, etc - 30,000 listings in 400 categories.
McGillivray's Theatre Guide (formerly British Alternative Theatre
Directory)
Someone else may be able to help with this - We have a 1994 guide,
but there appears to be no record of the publishers still being in
existence. The address of the last publishers (Rebecca Books) was
in Brecon, North Wales in 1994.
If still in existence, deals mainly with "fringe" venues &
companies in the UK with a section on fringe venues in New York.
Needs someone in the UK to check it out
(According to the UCambridge library and the library of congress
1994 is the most recent edition, so it's probably deceased. The
ISBN is 0142-5218 if you need to find it. -- Steve)
Contacts - The Spotlight Casting Directory
7 Leicester Place, (off Leicester Square), London WC2H 7BP
Tel: (+44) 171 437 7631. Fax: 437 5881
info@spotlightcd.com
http://www.spotlightcd.com/
Annual (October) directory giving basic contact details for
Artists, Companies, Venues, Trade Firms, Managements, etc.
NOTE : There may be some Amateur Theatre Directories around, maybe
someone else can help with these.
Republic of Ireland
Irish Performing Arts Yearbook
See entry under United Kingdom
Stagecast Directory
Same as "Contacts" in the UK - now presumed defunct.
Mainly photos of Actors/Actresses and various addresses.
Europe
PAYE (Performing Arts Yearbook for Europe)
Arts Publishing International Ltd
4 Assam Street, London E1 7QS
Tel: (+44) 171 247 0066. Fax: 247 6868
api@easynet.co.uk
Covers ALL countries in Europe + Eastern Europe & Russia. Very
sparse & basic details on some venues, festivals, arts
organisations, companies, ministries of culture, etc.
Denmark
Teater i Danmark (Danish Theatre Yearbook)
Dansk ITI, Vesterbrogade 26, 3, 1620 Copenhagen
Tel : (+45) 3122 7500. Fax : 3124 0157
Venues & productions.
Finland
Theatterialan Avain/Osoite
ja Puhelinnumerohakemisto Teatterin Tiedotuskeskus Ry,
Teatterikulma, Meritullinkatu 33, 00170 Helsinki
Tel : (+358) 135 5550. Fax: 135 5522
Theatre & Dance Contacts in Finland.
France
Annuaire du Spectacle
Publications Mandel, BP 1219, 78202 Nantes la Jolie
Tel: (+33) 1 3098 3210. Fax: 1 3098 3200
Comprehensive listing of Organisations in the performing arts.
Book Technique du Spectacle
58 Rue Servan, 75011 Paris
Tel : (+33) 1 4700 1952. Fax : 1 4355 8194.
Directory of Trade Firms supplying equipment for the performing
arts.
Festivals et Expositions/Saison Culturelle
Ministere de la Culture et de la Communication, 3 Rue de Valois,
75042 Paris
Tel: (+33) 1 4015 8390. Fax: 1 4015 8552
Directory of contacts , addresses, dates of Festivals & Exhibitions
in France. "Guide Culturel d'Ete" covers the Summer months, "La
Saison Culturel - Guide Culturel de l'Hiver" covers the Winter
months.
Goliath
c/o Hors les Murs, 74 Avenue Pablo Picasso, 92000 Nanterre
Tel: (+33) 1 4669 9696. Fax: 1 4669 9698
Biennial Directory covering Street Theatre companies, suppliers,
agents, etc.
Germany
Deutsches Buhnen-Jahrbuch (German Stage Yearbook)
Gennossenschaft Deutscher Angehoriger im Verlag der
Buhnenschriften-Vetreibs-Gesellschaft, mbH, Postfach 130270, 20102
Hamburg
Tel: (+49) 40 445 185 / 443 870 Fax : 40 456 002
Directory of German Theatres, Festivals, companies of drama, opera
& dance.
Konzert Almanach
Heel Verlag GmbH, Wintermuhlenhof, 53639 Konigswinter
Tel: (+49) 2223 92300. Fax: 2223 923013
Concert calendar plus seat plans of venues in Germany. Programme
info on concerts in Austria & Switzerland.
Theateralmanach
Edition Smidt, Wolfratshauser Strasse 55, 82049 Pullach im Isartal
Tel: (+49) 89 793 8180 Fax: 89 793 8180
Theatre directory for Austria, Germany & Switzerland.
Belgium
International Festival Guide
European Network of Information Centres for the Performing Arts,
Vlaams Theatre Institut, Sainctelettesquare 19, 1210 Bruxelles
Tel: (+32) 2-201 0906 Fax: 2-209 0205
vti@vti.gn.apc.org
European festival listings on floppy disc.
Italy
Annuario Musicale Italiano (Italian Musical Yearbook)
Comitato Nazionale Italiano Musica (CIDIM), Via Vittoria Colonna
18, 00193 Roma
Tel: (+39) 6 6880 2402 / 2900 Fax : 6 687 4989
Directory of the Italian Musical scene with info on lyric theatres,
orchestras, ensembles, music festivals, etc. Available also on
floppy disc or CD ROM.
Annuario EDT dell'Opera Lirica in Italia (EDT Yearbook of Lyric Opera in
Italy)
EDT, Via Alfieri 19, 10121 Torino (Turin)
Tel: (+39) 11 562 1496 Fax : 11 517 6091
Listings of Lyric Theatres & Opera Houses, Companies,
Choreographers, Opera Companies, etc.
The Netherlands (Holland)
Theaterjaarboek
Theatre Institute Nederland, PO Box 19304, 1000 GH Amsterdam
Tel: (+31) 20 623 5104 Fax: 20 620 0051
Directory of Dutch companies, festivals, etc.
Norway
Pa Norske Scener
De norske teatres forening, Pilestredet 15B, 0614 Oslo
Tel: (+47) 2220 7200 Fax: 2220 7510
Yearbook of Norwegian theatre companies, festivals, & TV/Radio
drama.
Serbia
Godisnjak Jugoslovenskih Pozorista (Yugoslav Theatre Yearbook)
Sterijino Pozorje, Zmaj-Jovina 22/1, 21000 Novi Sad (Vojvodina)
Tel : (+381) ** NO further details **
Spain
Agenda Clave
Avenida Gaudi 10, 2ffl 1ffl, 08025 Barcelona
Tel: (+34) 3 347 5199 Fax: 3 456 1729
Directory of the Spanish Music & Showbusiness Industry.
Anuario de Titeres y Marionetas (Puppet Yearbook)
Centro de Documentacisn de Titeres de Bilbao, c/o Circo Amateur del
Club Deportes N:.2, 48004 Bilbao
Tel: (+34) 4 412 7451 Fax: 4 424 2550
Covering venues, festivals, companies etc involved in Puppetry.
Guia Teatral De Espaqa (Spanish Theatre Guide)
Centro de Documentacisn Teatral, Capitan Haya 44, 28020 Madrid
Tel: (+34) 1 572 3311/12/13/14 Fax : 1 570 5199
Bi-annual guide to theatres, companies, festivals, services, etc.
in Spain.
Recursos Musicales en Espaqa (Musical Resources in Spain)
Centro de Documentacisn Musical, Insituto Nacional de las Artes
Escenicas y de la Musica, Torregalindo 10, 28016 Madrid
Tel: (+34) 1 350 8600 Fax: 1 359 1579
Directory of Orchestras, Choirs, Ensembles, Festivals, etc for the
Spanish musical scene.
Switzerland
Schweizer Musik-Handbuch (Swiss Music Guide)
Atlantis Musikbuch-Verlag, Tramstrasse 71, 8050 Zurich
Tel: (+41) 1 311 6633 Fax: 1 311 6644
Directory of Orchestras, Festivals, Agents, Jazz Groups, etc in
Switzerland.
United States
The Book of the Road (1975)
Warner Bros. Records Inc., 3701 Warner Boulevard, Burbank,
California 91505
Directory of large scale venues in 50 US towns mainly aimed at the
Rock & Pop scene - technical specifications, etc.
??Possibly out of date and no longer published ??
South Africa
Contacts/Kontakte
Limelight Publications, 69 Ferero Avenue, Randpark Ridge Ext 18, PO
Box 760, 2156 Johannesburg
Tel: (+27) 11 793 7231/2 Fax : 11 792 2679
Directory for the Theatre, Television & Film Industry. Venues,
Companies, Trade Firms, etc in South Africa, Namibia & Zimbabwe.
Miscellaneous
Theatrewords
available though ABTT (Association of British Theatre Technicians),
47 Bermonsey Square, London SE1 3XT. UK
Tel : (+44) 171 403 3778 Fax : 378 6170
And through USITT (United States Insitute of Theater Technology),
10 West 19th Street, Suite 5a, New York, NY 10011
Tel: (+1) 212 924 9088
Technical Theatrical Terms in 9 Languages. The Languages are :
English, French, German, Swedish, Spanish, Italian, Dutch, Japanese
(written & phonetic) - possibly American as well.
"Theatrewords" is a publication giving the most common technical
theatrical terms as an aide to touring companies & technicians. The
sections are : Stage; Workshop; Electrics (Lighting); Sound;
Wardrobe; Wigs; Administration and Basic numbers. Maybe Norwegian &
Danish are covered by the Swedish Section, and Portuguese by the
Spanish Section. I understand Russian was also meant to be included
- but they failed to get their act together.........
Also available from Carla Lancaster, Book Bazzar, 42 Sydney Street,
London SW3 6PS. UK. Tel: (+44) 171 352 6810 Fax: 351 5728
Abroad, National Associations of Theatre Technicians should be able
to get hold of or stock the publication through their office of
OISTAT (International Organisation of Sceneographers, Theatre
Architects & Technicians).
Curtains!!! Or, A New Life For Old Theatres (1982 Edition)
c/o The Theatres Trust, 22 Charing Cross Road, London WC2H 0HR
Tel: (+44) 171 836 8591 Fax: 836 3302
Complete Gazeteer of all the surviving pre-1914 Theatres & Music
Halls in the UK. Lists whether demolished, derelict, or still in
use. The Theatres Trust are in the process of collating information
to include Theatres, etc built AFTER 1914 for another edition
possibly by 1999.
Thanks to thespis (Derry & Sheena Barbour)
Subject: 5. Script publishers information
Dramatists Play Service
440 Park Avenue South
New York, NY 10016
Tel: 212-683-8960
Fax: 212-213-1539
e-mail: postmaster@dramatists.com
web: http://www.dramatists.com
Samuel French (New York Office)
45 West 25th Street
New York, NY 10010
Tel: 212-206-8990
Fax: 212-206-1429
Subject: Stage Management (/stage_management/)
Subject: 1. What are cue lights?
They're small lights controlled by the stage-manager allowing her to cue
stage-crew and front of house operators.
Most people who've used them far prefer cue-lights + headsets to
headsets alone. Many, particularly sound engineers & flymen, are happy
running with just cue-lights
There seem to be two main flavours of cue lights.
The type I'm familiar with seems to be common in the UK. Each remote
cue-light position has a red light, a green light and a button. The
stage manager has a red light, a green light and a three-way switch for
each remote position
The SM moves the switch to 'standby' and both red lights start flashing.
The crewman presses the button to acknowledge and the red lights go to
steady-on. Then the SM moves the switch to 'go', both red lights go out,
both green lights go on. The SM releases the switch and both lights go
out.
These are nice, as the SM has feedback from the crew, and with an
explicit 'go' light it's easy to cue rapid sequences of cues (standby,
acknowledge, go, go, go). The downside is slightly more complex
hardware.
An even better variant of this has separate switches at he SMs desk for
standby and go. The go switch is a three-way, centre-off biased one-way
toggle switch. Moved to the biased position it turns on the go light.
Moved to the non-biased position it transfers control to a master go
switch. This makes it easy to go on multiple crew simultaneously.
The other flavour I know of is a single light at the remote position
with a switch at the SMs desk. These are used on-for-standby followed by
off-for-go, I believe. Anyone familiar with them want to correct me?
Subject: 2. What should be in a stage managers toolkit?
Well, this is what I have:
Pens, lots of pens. Pencils.
Notepad, larger pad of paper.
Yellow post-it notes, big & little.
White-out. Highlighter pens. Spirit markers.
Painkillers & plasters (note, giving these to people is a very
bad idea under some legislatures, including US & UK. I allow
people to steal them, but would *never* give them to somebody).
Safety pins. Needle and thread. (For when wardrobe have vanished)
Sellotape, LX tape, Gaffer tape - black and white.
Masking tape for marking up cue-lights.
Paper glue, stapler (good for costumes as well as paperwork...)
Screwdriver. Stanley knife.
Chocolate, for those endless techs.
Stuff to keep actors amused & quiet - this started when I did
kids shows, but is handy for adult actors too - cards, travel games.
Wet wipes. Tissues.
Copies of company contact list, props list, local list of 'phone
numbers (printers, fire marshall, local hospital, places to get
*anything* at short notice).
Maglight or other torch. Dark gel for dimming down working lights.
Glow tape.
Probably overkill - if you have co-operative wardrobe & tech-crew
around they'll deal with the problems and you'll never need half of
this stuff.
MultiPage
[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
Send corrections/additions to the FAQ Maintainer:
ratsfaq@blighty.com (Stagecraft FAQ admin (Steve Atkins))
Last Update March 27 2014 @ 02:12 PM
|
the best is made for fantasy sports players. Win a sufficient amount of at fantasy sports online, And DraftKings delivers a $ten,000 seat at the final poker event in Las Vegas. 1 wonderland player who won a seat this year is Max Steinberg, 1 of numerous former specialist poker players who switched to fantasy sports when three major illegal poker web sites have been shut down on April 15, 2011, Now often known as Black Friday. continue season, Those two players were capable to use the bias surrounding Arsene Wenger's future as an excuse. But in view that Wenger signed his two year contract, Ozil and Sanchez have in any event not signed. for the season, Sort the most up to date player stats from the last month or final week. In don't forget national, that is needed hot players, Not guys who had large games in September and have because gone cold. title type guides, League A single form guides and League Two kind guides are widely accessible to support you assess a side's likelihood of winning. The team which has manage of the ball will provide their offence (assaulted players) this pitch. unfortunately, By knocking the ball about, Opponents playing the pressing game can quite effortlessly tire. And should an opportunity now, suddenly arise, Defence might be rapidly switched to attack. a considerable downfall is that because the accuracy of passes requirements to be higher, Short passes in between the players essential. This extensively narrows the gap among the attack, Midfield and protection (normally, warriors is forced to push up). So if the opponent gains possession, a lengthy ball could properly open up the defence. Look to upgrade a position by trading two decent players for 1 true stud. if possible recognize a trading companion who has depth issues or a losing [url=https://charmdatescamreviews.wordpress.com/2019/01/17/charmdate-reviews-when-russian-and-ukrainian-dating-fails/]russian woman carrying[/url] record, you can also make the deal function. In case you have just about any concerns about exactly where beyond the way to use Click Through the following web Site, You can e mail us in our web page. straight forward encouraging phrases like Let's go, Or We can repeat this, can be handy letting the team know you think you can play properly and win. The lines need to be shifted sideways based just where the ball is. The third defenders ought keep a sensible distance to every other, Based on the width click through what follows web site opponent's attacking players are distributed in.