United States International Trade Commision Rulings And Harmonized Tariff Schedule

faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers

faqs.org > Rulings and Tariffs Home > Rulings By Number > 2007 HQ Rulings > HQ W56282~1 - HQ W966867 > HQ W563589

Previous Ruling Next Ruling
HQ W563589

---

December 14, 2006

CLA-02 RR:CTF:VS W563589 EAC

CATEGORY: CLASSIFICATION

Mr. Crispin N. Flores
President
C & J Logistical Services, Inc.
9103 S. Austin Drive
Pharr, TX 78577

RE: North American Free Trade Agreement (“NAFTA”); regional value content; General Note 12, HTSUS; lawnmower transmissions.

Dear Mr. Flores:

This is in response to your electronic submissions of August 21, 2006, in which you request a ruling on behalf of General Transmission, Inc., pertaining to whether lawnmower transmissions from Mexico are eligible to receive preferential treatment under the NAFTA. All confidential financial information in this ruling letter will be bracketed and redacted from the public version.

FACTS:

The imported products under consideration in this case are ten lawnmower transmissions that are assembled in Mexico from parts of various origins. You state that the assembled lawnmower transmissions are all classified under subheading 8483.40.50, Harmonized Tariff Schedule of the United States (“HTSUS”). The name, origin, tariff classification, and cost of the originating and non-originating parts utilized to assemble each of the lawnmower transmissions identified below was provided in your submissions.

Lawnmower Transmission #1 (P/N: 194935)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork U.S. 7326.90, HTSUS [xxxxxx]
EHP Spring U.S. 7320.20, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DC EHP Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever MTD Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
O-ring Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #2 (P/N: 199205)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork U.S. 7326.90, HTSUS [xxxxxx]
EHP Spring U.S. 7320.20, HTSUS [xxxxxx]
Flask MTD Pulley U.S. 8483.90, HTSUS [xxxxxx] Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DC EHP Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Pulley Hub Mexico 8483.50, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever EHP Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
O-ring Taiwan 4016.93, HTSUS [xxxxxx]
Screw MTD Taiwan 7318.15, HTSUS [xxxxxx]
Nut NUT Pulley Taiwan 7318.16, HTSUS [xxxxxx] Elastic Pin Taiwan 7318.29, HTSUS [xxxxxx] Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #3 (P/N: 193354)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Bushing Mexico 3926.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #4 (P/N: 194936)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork U.S. 7326.90, HTSUS [xxxxxx]
EHP Spring U.S. 7320.20, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DC EHP Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever MTD Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
O-ring Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #5 (P/N: 199206)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork U.S. 7326.90, HTSUS [xxxxxx]
EHP Spring U.S. 7320.20, HTSUS [xxxxxx]
Flask MTD Pulley U.S. 8483.90, HTSUS [xxxxxx] Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DC EHP Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Pulley Hub MTD Mexico 8483.50, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever ETD Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
O-ring Taiwan 4016.93, HTSUS [xxxxxx]
Screw MTD Taiwan 7318.15, HTSUS [xxxxxx]
Nut MUT Pulley Taiwan 7318.16, HTSUS [xxxxxx] Elastic Pin Taiwan 7318.29, HTSUS [xxxxxx] Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #6 (P/N: 191636)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork NPI U.S. 7326.90, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DG NPI Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever EHP Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Seal Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]
Spring France 7320.20, HTSUS [xxxxxx]
Screw Germany 7318.15, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #7 (P/N: 188645)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Bushing Mexico 3926.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #8 (P/N: 188295)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Bushing Mexico 3926.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #9 (P/N: 188296)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Fork U.S. 7326.90, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Fix DG NPI Mexico 8483.60, HTSUS [xxxxxx] Mobil DC EHP Mexico 8483.60, HTSUS [xxxxxx] Bushing Mexico 3926.90, HTSUS [xxxxxx]
Lever EHP Mexico 7326.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Seal Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]
Spring France 7320.20, HTSUS [xxxxxx]
Screw Germany 7318.15, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Lawnmower Transmission #10 (P/N: 188294)

Originating Parts (U.S.- and Mexican-origin)

Part Origin Tariff Classification Cost
Washer U.S. 7318.22, HTSUS [xxxxxx]
Grease Mexico 3403.99, HTSUS [xxxxxx]
Worm Screw Mexico 8483.90, HTSUS [xxxxxx] Shaft Mexico 8483.10, HTSUS [xxxxxx]
Inf Carter Mexico 8483.90, HTSUS [xxxxxx] Sup Carter Mexico 8483.90, HTSUS [xxxxxx] Wheel Mexico 8483.40, HTSUS [xxxxxx]
Bushing Mexico 3926.90, HTSUS [xxxxxx]

Total: [xxxxxx]

Non-Originating Parts (Other)

Part Origin Tariff Classification Cost
Staples Taiwan 7326.90, HTSUS [xxxxxx]
Thermo Screw Taiwan 7318.15, HTSUS [xxxxxx] ACM 12.5 Taiwan 4016.93, HTSUS [xxxxxx]
ACM 12 Taiwan 4016.93, HTSUS [xxxxxx]
Bearing China 8482.10, HTSUS [xxxxxx]
Silicone Belgium 3910.00, HTSUS [xxxxxx]

Total: [xxxxxx]

This lawnmower transmission is assembled in Mexico at a cost of [xxxxxx] per unit. The total per unit cost is [xxxxxx].

Based upon the foregoing information, you claim that the various lawnmower transmissions will satisfy the applicable regional value content (“RVC”) requirements of General Note 12(t), HTSUS. This ruling will assume compliance with the RVC requirements, subject to any appropriate review at the time of importation when the appraised value of the lawnmower transmissions is finally established.

ISSUE:

Whether the imported lawnmower transmissions qualify for preferential treatment under the NAFTA.

LAW AND ANALYSIS:

General Note 12, HTSUS, incorporates Article 401 of the NAFTA into the HTSUS. General Note 12(a)(ii), HTSUS, provides:

Goods that originate in the territory of a NAFTA party under the terms of subdivision (b) of this note and that qualify to be marked as goods of Mexico under the terms of the marking rules set forth in regulations issued by the Secretary of Treasury (without regard to whether the goods are marked), when such goods are imported into the customs territory of the United States and are entered under a subheading for which a rate of duty appears in the "Special" subcolumn followed by the symbol "MX" in parentheses, are eligible for such duty rate, in accordance with section 201 of the North American Free Trade Agreement Implementation Act.

Accordingly, the lawnmower transmissions will be eligible for the “Special” “MX” rate of duty provided: (1) they are deemed to be NAFTA originating under the provisions of General Note 12(b), HTSUS; and, (2) qualify to be marked as products of Mexico under the NAFTA Marking Rules. In order to determine whether the lawnmower transmissions are NAFTA-originating, we must consult General Note 12(b), HTSUS, which provides, in pertinent part:

For purposes of this note, goods imported into the Customs territory of the United States are eligible for the tariff treatment and quantitative limitations set forth in the tariff schedule as ‘goods originating in the territory of a NAFTA party’ only if

(i) they are goods wholly obtained or produced entirely in the territory of Canada, Mexico and/or the United States; or
they have been transformed in the territory of Canada, Mexico, and/or the United States so that
except as provided in subdivision (f) of this note, each of the nonoriginating material used in the production of such goods undergoes a change in tariff classification described in subdivisions (r), (s) and (t) of this note or the rules set forth therein, or
the goods otherwise satisfy the applicable requirements of subdivisions (r), (s) and (t) where no change in tariff classification is required, and the goods satisfy all other requirements of this note; or
they are goods produced entirely in the territory of Canada, Mexico and/or the United States exclusively from originating materials.

Because the lawnmower transmissions are comprised, in part, of non-originating materials, General Note 12(b)(i), HTSUS, does not apply. Therefore, we must determine whether the non-originating materials undergo the tariff shift (or other applicable requirement) prescribed under General Note 12(b)(ii), HTSUS. As applied, the imported lawnmower transmissions are classified under subheading 8483.40.50, HTSUS. The applicable rule in General Note 12(t)/84.246, HTSUS, provides for:

A change to subheadings 8483.40 through 8483.60 from any subheading outside that group, except from subheadings 8482.10 through 8482.80, tariff items 8482.99.05, 8482.99.15 or 8482.99.25, or subheading 8483.90; or

A change to subheadings 8483.40 through 8483.60 from subheadings 8482.10 through 8482.80, tariff items 8482.99.05, 8482.99.15 or 8482.99.25, or subheading 8483.90, whether or not there is also a change from any subheading outside that group, provided there is a regional value content of not less than:

60 percent where the transaction value method is used, or

(2) 50 percent where the net cost method is used.

Part A of General Note 12(t)/84.246, HTSUS, is not satisfied in this case because the Chinese-origin bearings used in the ten transmissions are classified under subheading 8482.10, HTSUS. Therefore, the rule will be satisfied and NAFTA eligibility established only if the lawnmower transmissions satisfy Part B of the rule, i.e., if the change from non-originating materials also satisfies one of the RVC requirements.

General Note 12(c), HTSUS, provides the methods of calculating RVC for purposes of the NAFTA. You have requested that U.S. Customs and Border Protection (“CBP”) utilize the net cost method. The net cost method is set forth in General Note 12(c)(ii), HTSUS. General Note 12(c)(ii), HTSUS, provides:

The regional value content of a good may be calculated on the basis of the following net cost method:

NC - VNM
NC
where RVC is the regional value content, expressed as a percentage; NC is the net cost of the good; and VNM is the value of the non-originating materials used by the producer in the production of the good. See also, 19 C.F.R. Part 181, Appendix, Part III, Sec. 6(3).

The methods of calculating the net cost of a good are set forth in 19 C.F.R. Part 181, Appendix, Part III, Sec. 6(11). Subsection (11) provides three methods from which the producer of a good may choose to calculate the net cost. The options are:
calculating the total cost incurred with respect to all goods produced by that producer, subtracting any excluded costs that are included in the total cost, and reasonably allocating, in accordance with Schedule VII, the remainder to the good;
calculating the total cost incurred with respect to all goods produced by that producer, reasonably allocating, in accordance with Schedule VII, that total cost to the good, and subtracting any excluded costs that are included in the amount allocated to that good; or
reasonably allocating, in accordance with Schedule VII, each cost that forms part of the total cost incurred with respect to the good so that the aggregate of those costs does not include any excluded costs. 19 C.F.R. Part 181, Appendix, Part III, Sec. 6 (11).

“Excluded costs” as used in section 6 (11) is defined in Part I, section 2 (1), and means “sales promotion, marketing and after-sales service costs, royalties, shipping and packing costs and non-allowable interest costs.” Each of these aspects of “excluded costs” are further defined in section 2 (1).

The calculation of net cost initially requires the proper calculation of the total cost. Subsection (12) of section 6 addresses “total cost” and states that “[t]otal cost consists of the costs referred to in section 2 (6), and is calculated in accordance with that subsection.” In this case, CBP was not provided with sufficient information to allow for a determination of “total cost” as referred to in section 2 (6). Therefore, the analysis set forth below relies solely upon the information provided in your submission.

Based upon the information contained in your submission, the formula under the net cost method of determining regional value content for each of the lawnmower transmissions is:

Lawnmower Transmission #1 (194935)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #2 (199205)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #3 (193354)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #4 (194936)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #5 (199206)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #6 (191636)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #7 (188645)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #8 (188295)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #9 (188296)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Lawnmower Transmission #10 (188294)

[xxxxxx] - [xxxxxx]
[xxxxxx]

Performing the required calculation renders a result of [xxxxxx]%, a RVC in excess of that required under Part B of General Note 12(t)/84.246, HTSUS.

Therefore, based upon the information before us, the lawnmower transmissions identified in the ten production scenarios set forth above satisfy the applicable NAFTA rule of origin. However, these calculations would be subject to appropriate review upon importation into the United States based upon the final appraised value of the merchandise.

General Note 12(a)(ii), HTSUS, establishes that NAFTA-originating goods must also qualify to be marked as goods of Mexico under the NAFTA Marking Rules before preferential treatment is granted. In this regard, section 134.1(j) of the Customs and Border Protection Regulations (19 C.F.R. §134.1(j)), provides that the “NAFTA Marking Rules” are the rules promulgated for purposes of determining whether a good is a good of a NAFTA country. Section 134.1(g) defines a "good of a NAFTA country" as an article for which the country of origin is Canada, Mexico or the United States as determined under the NAFTA Marking Rules.

Part 102, Customs and Border Protection Regulations (19 C.F.R. Part 102), sets forth the NAFTA Marking Rules. Section 102.11 provides a required hierarchy for determining the country of origin of a good for marking purposes. Applied in sequential order, the required hierarchy establishes that the country of origin of a good is the country in which:

(a)(1) The good is wholly obtained or produced;

The good is produced exclusively from domestic materials; or

Each foreign material incorporated in that good undergoes an applicable change in tariff classification set out in §102.20 and satisfies any other applicable requirements of that section, and all other applicable requirements of these rules are satisfied.

The imported lawnmower transmissions are neither wholly obtained or produced or produced exclusively from “domestic” (Mexican, in this case) materials. Therefore, we must consider whether the foreign materials undergo an applicable change in tariff classification (or other applicable requirement) under section 102.20. The applicable rule for subheading 8483.40, HTSUS, in section 102.20 requires “[a] change to subheading 8483.30 through 8483.60 from any other subheading, including another subheading within that group.” As applied, the non-originating materials and parts used to assemble the lawnmower transmissions identified in the ten production scenarios set forth above undergo the requisite tariff shift in each case. Therefore the imported lawnmower transmissions qualify to be marked as products of Mexico under the NAFTA Marking Rules.

HOLDING:

Based upon the information in your submission, the lawnmower transmissions identified in the ten production scenarios set forth above would satisfy the NAFTA rule of origin set forth in Part B of General Note 12(t)/84.246, HTSUS. Moreover, the country of origin of the ten lawnmower transmissions under the NAFTA Marking Rules would be Mexico. Therefore, the lawnmower transmissions would be eligible to receive preferential treatment under the NAFTA. However, please be advised that the calculations performed in this ruling will be subject to review upon importation into the United States based upon the final appraised value of the merchandise.

A copy of this ruling letter should be attached to the entry documents filed at the time this merchandise is entered. If the documents have been filed without a copy, this ruling should be brought to the attention of the CBP officer handling the transaction.

Sincerely,

Monika R. Brenner, Chief
Valuation and Special Programs Branch


Previous Ruling Next Ruling

See also:

• Tariff No.: 8482.99.05 - Inner or outer rings or races for ball bearings
• Tariff No.: 8482.99.15 - Inner or outer rings or races for taper roller bearings
• Tariff No.: 8482.99.25 - Inner or outer rings or races for other bearings, nesi
• Tariff No.: 8483.40.50 - Fixed, multiple and variable ratio speed changers, not imported for use with machines for making cellulosic pulp, paper or paperboard