United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2003 NY Rulings > NY J81880 - NY J81923 > NY J81911

Previous Ruling Next Ruling
NY J81911





April 2, 2003

CLA-2-82:RR:NC:1:104 J81911

CATEGORY: CLASSIFICATION

TARIFF NO.: 8209.00.0030

Mr. Craig M. Schau
Emery Customs Brokers
6940A Engle Road
Middleburg Hts., OH 44130

RE: The tariff classification of tool blanks from the U.S. and other countries

Dear Mr. Schau:

In your letter dated March 5, 2003 on behalf of Rogers Tool Works, Inc. of Rogers Arkansas you requested a tariff classification ruling.

Samples of tungsten carbide tool blanks, part numbers P4608H1250F01R, P71007R, P4606H1250F02R, P4606H1250F01 and T2587110R have been provided. The blanks, made in the U.S., are in the form of rods approximately 1 ½” long by 1/8” in diameter. The various part numbers differ in their grade or material specifications. You state that the blanks are produced out of a carbide powder also manufactured in the U.S. You have since confirmed by your e-mail of March 31, 2003 that the blanks are all made of sintered tungsten carbide.

At present, your client manufactures these blanks in the U.S. and ships them overseas where they are subject to grinding, fluting, pointing, washing/rinsing, inspection, ringing, and packing and labeling. The resulting drill bits, router bits, etc. will be used for printed circuit board production. The bits are the subject of a separate ruling request.

The applicable subheading for the tungsten carbide tool blanks will be 8209.00.0030, Harmonized Tariff Schedule of the United States (HTS), which provides for plates, sticks, tips and the like for tools, unmounted, of cermets. The general rate of duty will be 4.6 percent.

This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177).

A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Robert Losche at 646-733-3011.

Sincerely,

Robert B. Swierupski
Director,

Previous Ruling Next Ruling

See also: