United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2000 HQ Rulings > HQ 963433 - HQ 963535 > HQ 963498

Previous Ruling Next Ruling
HQ 963498





March 23, 2000

CLA-2 RR:CR:TE 963498 SS

CATEGORY: CLASSIFICATION

TARIFF NO.: 3926.90.9880

Ms. Donna Powers
Patrick Powers Customs Brokers Inc.
P.O. Box 30155
JFK Airport Station
Jamaica, NY 11430

RE: Reconsideration of New York Ruling Letter 857481; Ninja Turtle Plastic Belt Biter; Tote Tube; Other Article of Plastic; Heading 3926, HTSUSA; Not Article of Plastic for the Conveyance or Packing of Goods, Heading 3923, HTSUSA; Not Travel Goods and Similar Containers, Heading 4202, HTSUSA

Dear Ms. Powers:

This letter is pursuant to Headquarters’ reconsideration of New York Ruling Letter (NY) 857481, dated November 14, 1990, regarding classification under the Harmonized Tariff Schedule of the United States Annotated (HTSUSA) of a Ninja Turtle plastic belt biter.

This letter is to inform you that after review of that ruling, it has been determined that the classification of the Ninja Turtle plastic belt biter in subheading 3923.10.0000

It appears that NY 857481 contains a typographical error. Based on the language of the applicable heading cited in that ruling, the reference to 3923.90.0000 should be 3923.10.0000., HTSUSA, is incorrect. As such, NY 857481 is revoked pursuant to the analysis which follows below.

Pursuant to section 625(c), Tariff Act of 1930, as amended (19 U.S.C. 1625(c)), notice of the proposed revocation of NY 857481 was published on February 16, 2000, in the Customs Bulletin, Volume 34, Number 7. No comments were received.

FACTS:

The plastic belt biter which is the subject of this ruling was described in NY 857481 as follows:

The sample submitted with your letter is identified as a Ninja Turtle plastic belt biter. It is made of molded plastics with a front section in the shape of a Ninja Turtle face connected with a short strap-like hinge to the top of the back section. It is designed to fit onto a belt or other strap and is secured by hooking a loop at the bottom of the face front onto a tab in the bottom of the back section. The hollow face-shaped front has a built-in compartment with a latching cover in which one can keep a few coins, bills or notes. Included in the blister package is a “VELCRO” like strap which can be threaded through two slots in the back section and used to secure the belt biter to knapsacks, schoolbags or lunch boxes.

ISSUE:

What is the proper classification of the plastic belt biter under the HTSUSA?

LAW AND ANALYSIS:

Classification of goods under the Harmonized Tariff Schedule of the United States Annotated (HTSUSA) is governed by the General Rules of Interpretation (“GRIs”). GRI 1 provides that classification shall be determined according to the terms of the headings of the tariff schedule and any relative section or chapter notes. In the event that the goods cannot be classified solely on the basis of GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRI may then be applied. The Explanatory Notes (EN) to the Harmonized Commodity Description and Coding System, which represent the official interpretation of the tariff at the international level, facilitate classification under the HTSUSA by offering guidance in understanding the scope of the headings and GRI.

Three headings are under consideration: heading 4202, HTSUSA, which covers, among other things, travel goods, handbags and similar containers; heading 3923, HTSUSA, which covers, among other things, articles of plastic for the conveyance or packing of goods; and heading 3926, HTSUSA, which covers other articles of plastic.

Heading 4202, HTSUSA, provides for:

Trunks, suitcases, vanity cases, attache cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; traveling bags, toiletry bags, knapsacks and backpacks, handbags, shopping bags, wallets, purses, map cases, cigarette cases, tobacco pouches, tool bags, sports bags, bottle cases, jewelry boxes, powder cases, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanized fiber, or of paperboard, or wholly or mainly covered with such materials or with paper:

Heading 4202, HTSUSA is divided into two portions. Articles listed before the semicolon are not restricted as to material composition, whereas articles listed in the second portion must be of leather or composition leather, of sheeting of plastics, of textile material, of vulcanized fiber, or of paperboard, or wholly or mainly covered with such materials or with paper.

The first portion of heading 4202, HTSUSA, lists trunks, suitcases, vanity cases, attache cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers. The EN to heading 4202, HTSUSA, state that the expression "similar containers" in the first part includes hat boxes, camera accessory cases, cartridge pouches, sheaths for hunting or camping knives, etc. As the belt biter is not one of the named articles, its classification in the first portion of heading 4202, HTSUSA, depends on its similarity to one of the named articles. The belt biter is not similar to the first six articles. The first six articles are large articles, often handcarried by means of an attached handle and used to carry items other than small items normally carried in the pocket or handbag. The belt biter is small, constructed to be worn on a belt or pocket and designed to carry small items like keys, money or cigarettes. The belt biter is also distinguishable from the remaining six articles. The remaining six articles are containers made to carry one specific article (although they may also accommodate small accessories or parts like a lens cap or cleaning rod) and are often formfitted to the particular item to be carried. The belt biter is capable of carrying several small items and is not fitted to any one particular item. Accordingly, we find that the belt biter is not classifiable in the first portion of heading 4202, HTSUSA.

If the belt biter is to be considered for classification under the second portion of heading 4202, HTSUSA, it must be of, or wholly or mainly covered with one of the specified materials or with paper. The belt biter is clearly not of, or covered with, leather, composition leather, plastic sheeting, textile material, vulcanized fiber, paperboard or paper. The belt biter is made from molded plastic and cannot be considered for classification under the second portion of heading 4202, HTSUSA. See Headquarters Ruling Letter (HQ) 950779, dated April 1, 1992.

The next heading under consideration is heading 3923, HTSUSA. Heading 3923, HTSUSA, provides for, in pertinent part, articles for the conveyance or packing of goods, of plastics. The EN to heading 3923, HTSUSA, state that the “heading covers all articles of plastics commonly used for the packing or conveyance of all kinds of products." The EN also state that the heading includes containers such as boxes, cases, crates, sacks and bags (including cones and refuse sacks), casks, cans, carboys, bottles and flasks.

Articles known as “tote tubes” have previously been classified under heading 3923, HTSUSA. In HQ 083131, dated September 13, 1989, Customs classified a molded plastic tote tube that held small items and provided protection from sand and water under heading 3923, HTSUSA. The tote tube was designed to be carried on the person by hanging the cord around the wearer’s neck. In HQ 082829, dated March 6, 1990, another molded plastic tote tube designed to house money, keys, etc., during sporting events when carrying a wallet or purse would be inconvenient was classified under heading 3923, HTSUSA. In HQ 950779, dated April 1, 1992, Customs classified yet another molded plastic container designed to protect personal articles such as money, credit cards, keys, cigarettes, a lighter, watch or film from water, sand, shock or theft under heading 3923, HTSUSA. Customs explained that the tote tubes were used to convey goods, i.e., the wearer used them to transport their personal belongings about from place to place. For additional rulings classifying similar items under heading 3923, HTSUSA, see New York Ruling Letter (NY) 850984, dated April 11, 1990; NY 857481, dated November 14, 1990; NY 858432, dated December 21, 1990; NY 860135, dated February 13, 1991; NY 866303, dated September 4, 1991; NY 872534, dated March 26, 1992; NY 877398, dated September 4, 1992; NY 886229, dated June 9, 1993; and NY 809523, dated May 9, 1995.

However, these rulings no longer represent Customs position regarding the classification of tote tubes. Customs first began to reconsider the scope of heading 3923, HTSUSA, by noting that the exemplars listed in the EN to heading 3923, HTSUSA, were used generally to convey or transport goods over long distances and often in large quantities. See HQ 087635, dated October 24, 1990; HQ 951404, dated July 24, 1992; and HQ 953841, dated September 27, 1993. Next, Customs indicated that heading 3923, HTSUSA, was generally reserved for articles used for shipping purposes. See HQ 089825, dated April 9, 1993; HQ 953275, dated April 26, 1993; and HQ 953458, dated April 16, 1993. In 1993, Customs took the position that heading 3923, HTSUSA, provided for cases and containers of bulk goods and commercial goods and not personal items. See HQ 954072, dated September 2, 1993. This position has been consistently followed since 1993. See HQ 954816, dated December 7, 1993; HQ 955660, dated September 27, 1994; HQ 955047, dated October 6, 1994; HQ 957894, dated December 14, 1995; HQ 957895, dated December 14, 1995; HQ 958174, dated January 31, 1996; HQ 959116, dated January 7, 1997; HQ 960199, dated May 15, 1997; HQ 960430, dated December 24, 1997; HQ 959780, dated February 17, 1998; HQ 959522, dated May 20, 1998; HQ 959846, dated October 28, 1998; HQ 961517, dated November 6, 1998; HQ 961049, dated January 5, 1999; and HQ 960811, dated February 3, 1999. Items such as sequined beaded waist bags, molded plastic carrying cases for drawing materials, molded plastic tote bags, molded plastic pencil cases and molded plastic hinged cases for computer disks have been classified outside of heading 3923, HTSUSA, based on findings that the articles were designed to carry personal effects. See HQ 954816, HQ 957894, HQ 959116, HQ 960199 and HQ 959780 (cited above). Similarly, the belt biter is designed to carry personal effects and is not designed to carry bulk or commercial goods. Accordingly, the belt biter is not properly classifiable in heading 3923, HTSUSA.

We note that Customs has previously revoked a series of rulings which classified containers used for personal articles under heading 3923, HTSUSA. In HQ 960199, dated May 15, 1997, Customs revoked an earlier ruling, NY 887467, dated July 9, 1993, which classified a plastic molded pencil box under heading 3923, HTSUSA, and reclassified the article under heading 3926, HTSUSA. Citing to the rulings which state that heading 3923, HTSUSA, provides for cases and containers of bulk goods and commercial goods, not personal articles, Customs found that the pencil boxes transported pens, pencils, erasers, etc. for personal use and were not described by heading 3923, HTSUSA. For other rulings consistent with this position see: HQ 960196, dated May 15, 1997; HQ 960198, dated May 15, 1997; HQ 960152, dated May 15, 1997; HQ 960153, dated May 15, 1997; HQ 960154, dated May 15, 1997; HQ 960155, dated May 15, 1997; HQ 960157, dated May 15, 1997; HQ 961058, dated May 15, 1997; and HQ 959402, dated May 15, 1997. Following this rationale, the belt biter which is used to transport and store personal articles is also precluded from classification under heading 3923, HTSUSA.

Finally, heading 3926, HTSUSA, provides for “[o]ther articles of plastics and articles of other materials of headings 3901 to 3914.” The EN to heading 3926, HTSUSA, indicate that the heading is the basket provision for plastic articles not described more specifically elsewhere in the tariff schedule. The belt biter is not described more specifically elsewhere in the tariff schedule. In HQ 959116 (cited above) Customs classified a molded plastic tote bag which was designed to store, carry and otherwise hold personal articles such as beach items or a blanket under heading 3926, HTSUSA. Finding that the belt biter is similar to the molded plastic tote bag, we conclude that the belt biter is properly classifiable under heading 3926, HTSUSA.

HOLDING:

The Ninja Turtle plastic belt biter is properly classifiable in subheading 3926.90.9880, HTSUSA, the provision for “Other articles of plastics and articles of other materials of headings 3901 to 3914: Other: Other, Other.” The general column one duty rate is 5.3 percent ad valorem.

NY 857481 dated November 14, 1990, is hereby revoked. In accordance with 19 U.S.C. 1625(c), this ruling will become effective 60 days after its publication in the Customs Bulletin.

Sincerely,
John Durant, Director
Commercial Rulings Division


Previous Ruling Next Ruling

See also: