United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2000 HQ Rulings > HQ 228272 - HQ 546534 > HQ 468780

Previous Ruling Next Ruling
HQ 468780





March 27, 2000

RR:IT:IP 468780 CRS

CATEGORY: 19 U.S.C. ' 1337 UNFAIR COMPETITION

Peter A. Quinter, Esq.
Becker & Poliakoff, P.A.
P.O. Box 9057
Ft. Lauderdale, FL 33310-9057

RE: Lens-Fitted Film Packages; ITC Investigation No. 337-TA-406

Dear Mr. Quinter:

This is in reply to your letter of December 14, 1999, on behalf of your clients, Atico International USA, Inc., Vastfame Camera Ltd., and Diamond City International Gift, Inc., in which you requested a ruling as to whether certain cameras, model nos. N99, N99F, N991 and N991F, are excluded from entry into the United States pursuant to the General Exclusion Order issued by the U.S. International Trade Commission in Investigation No. 337-TA-406. Sample cameras were included with the ruling request and were submitted for U.S. Customs Laboratory analysis.

On March 3, 2000, you, Peter Cobrin of Cobrin & Gittes, and Marian Harding Cochran of Atico, met with members of my staff at Customs Headquarters to discuss this matter. An additional submission was made by Mr. Cobrin under cover of a letter March 6, 2000.

FACTS:

Pursuant to the above-referenced exclusion order, the ITC determined that there was a violation of 19 U.S.C. ' 1337 in regard to certain lens-fitted film packages (LFFPs), also known as one-time use cameras, single use cameras, and disposable cameras, that infringed claims under one or more of fifteen patents owned by Fuji Photo Film Co., Inc, including claims 14 and 15 of U.S. Letters Patent 4,855,774 (the “'774 patent”). Certain Lens-Fitted Film Packages, Inv. No. 337-TA-406, General Exclusion Order at 1-2. In its Opinion, the ITC described LFFPs as follows:

The products at issue in this investigation are inexpensive, disposable, single use-cameras, technically referred to as Alens-fitted film packages@ or ALFFPs.@ LFFPs are generally constructed of a shell made of a plastic material such as polystyrene. They are equipped with a button-activated shutter, a lens, a viewfinder, a film advance mechanism, and optional flash units and buttons. An outer cardboard cover, containing printed information such as branding and instructions, encases the shell. LFFPs are preloaded with film and a film cartridge. When pictures are taken, the exposed film winds into the film cartridge. After taking pictures, a typical consumer brings the entire LFFP to a film processor to have the film developed and receives back only negatives and prints, not the LFFP shell and its contents.

Certain Lens-Fitted Film Packages, Inv. No. 337-TA-406 (June 2, 1999), Commission Opinion at 2. See also, Id., Final Initial and Recommended Determinations, Additional Findings, no. 1 at 214.

The sample N99 camera is made of plastic and is preloaded with film. The sample has a blank, white cardboard wrapper or jacket that is glued around the entire body of the camera; the camera cannot be opened without removing the cardboard jacket. The camera body consists of a front and back, hinged on one side and with a locking catch on the opposite side. The locking catch release tab is covered by a paper seal which must be removed in order to open the camera.

As noted above, the N99 is preloaded with film. The film is wound around a spool on the opposite side of the camera from the film canister. After an exposure is taken the exposed portion of the film is wound into the film canister. The outer cardboard jacket must be removed, and the camera opened, in order to remove the film. The camera was successfully reloaded by Customs Laboratory personnel. New film was loaded into the camera and the film’s leader was hooked onto a tab on the take-up spool. Based on Customs’ laboratory analysis, the cameras can be opened, reloaded and closed without affecting the cameras’ light-tightness.

In addition, based on laboratory examination, it was determined that the cameras feature horizontal parallel ribs cast into the back of the camera that are similar to the construction protected by claims 14 and 15 of the '774 patent, which claims assert the following:

14. A lens-fitted photographic film package comprising a light-tight film case with a taking lens fitted thereto and a rolled film, said case having a rolled film chamber, a film take-up chamber, and a back wall portion that closes said two chambers, said rolled film chamber having a rearwardly opening concave curved wall against which the outermost turn of the rolled film lies, said back wall portion having protuberances thereon that define a forwardly opening concave path for the film between said chambers, said back wall portion having a forwardly opening concave curved portion that overlies said rolled film chamber and that contacts and supports the rear of the film emerging from said roll at regions of said film spaced from the longitudinal edges of the film and that in cooperation with said rearwardly opening concave wall of said rolled film chamber contacts the outermost turn of said rolled film chamber and maintains said rolled film in a substantially cylindrical roll.

15. A lens-fitted photographic film package comprising a light tight film case with a taking lens fitted thereto and a rolled film, said case having a rolled film chamber, a film take-up chamber, and a back wall portion that closes said two chambers, said rolled film chamber having a rearwardly opening concave curved wall against which the outermost turn of the rolled film lies, said back wall portion having a forwardly opening concave portion that overlies said rolled film chamber and that contacts and supports the rear of the film emerging from said roll at regions of said film spaced from the longitudinal edges of the film and that in cooperation with said rearwardly opening concave wall of said rolled film chamber contacts the outermost turn of said rolled film and maintains said rolled film is (sic) a substantially cylindrical roll.

Claims 14-15, United States Letters Patent 4,855,774, at 10.

The sample N99F camera is identical to the N99 model, except that it is equipped with a flash unit. Furthermore, as submitted, the N99F has a paper jacket that only partially covers camera, in contrast with the N99 which is completely encased by a jacket. The wrapper states that the N99F is reusable and contains directions for taking photographs; however, there are no instructions on how to reload the camera. The N991 and N991F (with flash) are similar to the sample N99 described above in that they have a hinge and slide-lock mechanism which enable them to be opened and reloaded. The major difference between the N99 and the N991/N991F is that whereas the N99 has a curved back, the N991 and N991F have flat backs. The N991 and N991F also have slightly longer ribs than the N99.

ISSUE:

The issue presented is whether the sample cameras are lens-fitted film packages within the scope of the ITC=s general exclusion order in Inv. No. 337-TA-406, such that they are excluded from entry for consumption into the United States.

LAW AND ANALYSIS

Section 337 of the Tariff Act of 1930, as amended (19 U.S.C. ' 1337), prohibits, inter alia, the importation, the sale for importation, or the sale within the United States after importation by the owner, importer, or consignee of articles that infringe a valid and enforceable U.S. patent. 19 U.S.C. ' 1337(a)(1)(B)(i). The ITC has authority to investigate alleged violations of section 337. If the ITC determines that there has been a violation of section 337, it shall, subject to certain potential exceptions, direct that the articles concerned be excluded from entry into the U.S. and, accordingly, notify the Secretary of the Treasury who shall, through its proper officers, refuse such entry. 19 U.S.C. ' 1337. See also, 19 C.F.R. ' 12.39.

In Investigation No. 337-TA-406, the ITC determined that certain LFFPs infringed claims under one or more of fifteen patents owned by Fuji Photo Film Co., Inc., including claims 14 and 15 of U.S. Letters Patent 4,855,774. The ITC ordered that LFFPs that infringed any of the patents be excluded from entry for consumption into the U.S., and notified Customs accordingly. General Exclusion Order, Certain Lens-Fitted Film Packages, Inv. No. 337-TA-406 (June 2, 1999), at 2.

The general exclusion order covers LFFPs, i.e., relatively inexpensive products also known as disposable cameras, single use-cameras and one-time use cameras. LFFPs are generally constructed of a plastic material such as polystyrene, and are equipped with a button-activated shutter, lens, viewfinder, film advance mechanism, and optional flash units and buttons. The outer shell of the LFFP is encased in a cardboard cover or jacket containing printed information such as branding and operating instructions. When an exposure is made, the exposed film winds into the film cartridge. Once a roll of film has been exposed, the consumer typically brings the entire LFFP to a film processor to have the film developed and receives back only negatives and prints, but not the LFFP shell and its contents. Id. at 2; see also, Commission Opinion, Certain Lens-Fitted Film Packages, Inv. No. 337-TA-406 (June 2, 1999), at 2.

The sample cameras have plastic bodies and are preloaded with film. The two “F” models are equipped with flash mechanisms while the other samples do not. The sample cameras are encased in or partially covered by cardboard jackets that are glued to the body of the camera; the jackets cannot be opened without removing the jackets. The camera shell consists of a front and back, hinged on one side and with a locking catch on the opposite side.

Laboratory analysis has established that the inner back walls of the sample cameras feature horizontal parallel ribs of the type protected by claims 14 and 15 of the ‘774 patent. In regard to claim 14, Customs finds that the back wall portion has protuberances (ribs) that define a forwardly opening concave path for the film between the rolled film chamber and the take-up chamber, and that the back wall has a forwardly opening concave portion that overlies the rolled film chamber and that contacts and supports the film as it emerges from the roll such that the film remains in a substantially cylindrical roll. In respect of claim 15, Customs finds that the sample cameras have back wall portions with forwardly opening concave curved portions that overlie the rolled film chamber and that contact and support the rear of the film at a point spaced from the longitudinal edges in order to avoid distortion of the film. Customs does not interpret the claim language to require that the ribs completely cover the rolled film chamber. Instead, based on laboratory analysis, we find that the back wall of the camera itself acts as the curved portion.

Nevertheless, the sample cameras are distinguishable from the LFFPs covered by the ITC’s general exclusion order. In the first instance, the sample cameras are susceptible of reuse in that they feature a hinged back and slide-lock closing which enables them to be opened and closed. As a result, it is possible to reload and reuse the sample cameras. In addition, the sample cameras were successfully reloaded and reused under laboratory conditions, and their light tightness was not compromised, even after the paper jacket encasing the article was removed. The sample cameras can be loaded and reloaded outside of a darkroom.

Accordingly, given that the sample cameras are susceptible of reuse, it is our position that the sample cameras at issue are not lens-fitted film packages within the scope of the ITC’s general exclusion order and do not infringe the '774 patent. See also, Headquarters Ruling Letter 467930, dated October 22, 1999.

HOLDING:

In conformity with the foregoing, the sample N99, N99F, N991 and N991F cameras are not within the scope of the ITC=s general exclusion order in Inv. No. 337-TA-406. The cameras may be entered for consumption into the United States.

Sincerely,


Previous Ruling Next Ruling