United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 1999 NY Rulings > NY E82611 - NY E82659 > NY E82647

Previous Ruling Next Ruling
NY E82647





July 6, 1999

CLA2-RR:NC:TA:N3:356 E82647

CATEGORY: CLASSIFICATION

Mr. Bolla
Florence Montecarlo
38, Boulevard des Moulins
Montecarlo 98000
Monaco

RE: Classification and country of origin determination for a man’s knit garment; 19 CFR 102.21(c)(3)

Dear Mr. Bolla:

This is in reply to a letter dated May 20, 1999, from EMF Marketing Services, New York, New York requesting a classification and country of origin determination on your behalf. The ruling concerns a man’s knit garment which will be knit to shape in Italy, assembled in Tunisia, and sold by your firm for importation into the United States.

FACTS:

The submitted sample is a man’s pullover garment constructed from 60 percent cotton, 40 percent rayon, jersey knit fabric which measures 13 stitches per two centimeters counted in the horizontal direction. The garment has a spread collar; a partial front opening; long sleeves with rib knit cuffs; and a rib knit bottom.

The manufacturer has provided a set of samples of the garment parts as they are knit and sent to Tunisia for assembly, and a sample of the finished garment as it will be imported into the United States. The garment parts include the front and back panels, the left and right sleeves, the placket sections, and the collar.

The front panel has a rib knit self start bottom, self finished sides, and full fashion marks at the underarm area. The remainder of the armhole has a finished straight edge which does not require further shaping before assembly. The upper portion of the front panel has two diagonal lines of dropped stitches which serve as partial lines of demarcation for shaping the neckline. The lines of dropped stitches measure three and one-half inches in length and do not meet to form a continuous line of demarcation.

The back panel has a rib knit self start bottom and self finished sides. The back panel is knit to shape with full fashion marks at the underarm area. The remainder of the armhole has a finished straight edge and does not require further shaping before assembly. Full fashion marks also appear along the shoulder and continue to the neckline. There are no lines of demarcation on the back panel.

The sleeves have rib knit self start cuffs and self finished sides. They are knit to shape with full fashion marks in the armhole area.

The manufacturing operations are as follows:

ITALY:

- the front panel is knit with partial lines of demarcation at the neck - the back panel is knit to shape
- the right and left sleeve panels are knit to shape - the collar is knit
- the placket sections are knit

TUNISIA:

- the front neckline is cut along partial lines of demarcation - a six inch long vertical cut is made at the center neckline to form the placket opening - knit edging is sewn to the placket
- the sleeve and body panels are assembled - the spread collar is sewn on

ISSUE:

What are the classification and country of origin of the subject merchandise?

CLASSIFICATION:

The applicable subheading will be 6110.20.2065, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for sweaters, pullovers, ... and similar articles, knitted or crocheted: of cotton: other: other: other: men’s or boys’. The rate of duty will be 18.6 percent ad valorem. The garment falls within textile category designation 338.

COUNTRY OF ORIGIN - LAW AND ANALYSIS:

On December 8, 1994, the President signed into law the Uruguay Round Agreements Act. Section 334 of that Act (codified at 19 U.S.C. 3592) provides new rules of origin for textiles and apparel entered, or withdrawn from warehouse, for consumption, on and after July 1, 1996. On September 5, 1995, Customs published Section 102.21, Customs Regulations, in the Federal Register, implementing Section 334 (60 FR 46188). Thus, effective July 1, 1996, the country of origin of a textile or apparel product shall be determined by sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.

Paragraph (c)(1) states that "The country of origin of a textile or apparel product is the single country, territory, or insular possession in which the good was wholly obtained or produced." As the subject merchandise is not wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section 102.21 is inapplicable.

Paragraph (c)(2) states: "Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) of this section, the country of origin of the good is the single country, territory, or insular possession in which each of the foreign materials incorporated in that good underwent an applicable change in tariff classification, and/or met any other requirement, specified for the good in paragraph (e) of this section:"

Paragraph (e) states that "The following rules shall apply for purposes of determining the country of origin of a textile or apparel product under paragraph (c)(2) of this section":

HTSUS Tariff shift and/or other requirements

6101-6117 If the good is not knit to shape and consists of two or more component parts, a change to an assembled good of heading 6101 through 6117 from unassembled components, provided that the change is the result of the good being wholly assembled in a single country, territory, or insular possession.

If the good is knit to shape, a change to heading 6101 through 6117 from any heading outside that group, provided that the knit-to-shape components are knit in a single country, territory or insular possession.

The subject merchandise is classifiable as a men’s knit pullover in heading 6110, HTSUSA. Section 102.21 (e) requires a tariff shift to headings 6101 through 6117 from any heading outside that group. In this case, a tariff shift to heading 6110, HTSUSA, occurs in Tunisia, but from components that are classifiable in heading 6117, HTSUSA. As heading 6117, HTSUSA, is excepted by Section 102.21 (c)(2), the tariff shift is not applicable.

Section 102.21(c)(3) applies where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) or (2) and where the merchandise consists of either a good that was knit to shape or (with the exception for goods of certain specifically enumerated headings), was wholly assembled in a single country, territory, or insular possession.

Section 102.21 (c)(3)(i) provides the following:

If the good was knit to shape, the country of origin of the good is the single country, territory, or insular possession in which the good was knit; ...

Section 102.21 (b) states that:

(3) KNIT TO SHAPE: The term “knit to shape” applies to any good of which 50 percent or more of the exterior surface area is formed by major parts that have been knitted or crocheted directly to the shape used in the good, with no consideration being given to patch pockets, appliques, or the like. Minor cutting, trimming, or sewing of those major parts will not affect the determination of whether a good is “knit to shape”.

(4) MAJOR PARTS: The term “major parts” means integral components of a good but does not include collars, cuffs, waistbands, plackets, pockets, linings, paddings, trim, accessories, or similar parts.

In this case, the back panel and the sleeves are major parts which have been knit directly to the shape used in the good. The partial lines of demarcation at the front neckline are not continuous along the entire neckline and do not shape the placket. Nevertheless, the front panel is considered “knit to shape” because of the shaped and finished construction of the bottom, sides, and armholes. See Headquarters ruling 961981 JB of September 3, 1998. Thus, the subject garment is considered “knit to shape” as the term is defined above.

Accordingly, Section 102.21 (c)(3)(i) is applicable to the subject merchandise. The country of origin for the garment is Italy, the single country where the panels are knit to shape.

HOLDING:

The country of origin of the subject garment is Italy. Based upon international textile trade agreements, products of Italy are not presently subject to quota or visa requirements.

The holding set forth above applies only to the specific factual situation and merchandise identified in the ruling request. This position is clearly set forth in section 19 CFR 177.9(b)(1). This sections states that a ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect.

This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). Should it be subsequently determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished, this may affect the determination of country of origin. Accordingly, if there is any change in the facts submitted to Customs, it is recommended that a new ruling request be submitted in accordance with 19 CFR 177.2.

A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Mary Ryan at 212-637-7081.

Sincerely,

Robert B. Swierupski
Director,

Previous Ruling Next Ruling

See also: