United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 1997 NY Rulings > NY B88583 - NY B88694 > NY B88617

Previous Ruling Next Ruling
NY B88617




August 20, 1997

CLA-2-73:RR:NC:1:118 B88617

CATEGORY: CLASSIFICATION

TARIFF NO.: 7318.15.5060, 7318.16.0085, 7318.22.0000, 8302.30.3060, 8708.29.5060

Mr. Edward Woehr
Group Leader, Customs
Subaru-Isuzu Automotive Inc.
5500 State Road 38 East
Post Office Box 5689
Lafayette, Indiana 47903

RE: The tariff classification of fasteners and parts of automobiles from Japan.

Dear Mr. Woehr:

In your letter dated August 7,1997, you requested a tariff classification ruling.

The samples you have submitted are described as follows:

Item 1 is referred to as a "fixing bolt." The upper portion of the fastener has a ball which rests upon a conical shank that ends in a hexagonal base. At the bottom of the base is a threaded shank and on the top of the shank is an non removable washer. The head or ball of the bolt sits inside the vehicle and is used to secure the hydraulic arm(s) to the rear glass (hatch).

Item 2 is referred to as a "spacer." It is composed of a steel raised washer fitted with a rubber insert. This item is used in conjunction with item 1.

Item 3 is referred to as a "fastener." The item is plastic coated and has a button head and an internally threaded shank with a rubber washer fitted over the shank, and the bottom of the head.

Items 1 and 2 are placed against a hole in the rear glass. This leaves only the threads of the "fixing bolt" extending outside the vehicle glass. Item 3 is then placed against the glass and the three pieces are connected.

Item 4 is referred to as a "fastener for the hatch glass striker." The fastener has two threaded sections and is rectangular in shape measuring approximately three quarters inch by two and half inches in length.

Item 5 is referred to as an "air dam." The item is made of steel and plastic and is used to direct air flow to the rear differential to help cool the differential.

The provision applicable to the item 1 "fixing bolt" will be subheading 7318.15.5060, Harmonized Tariff Schedule of the United States (HTS), which provides for Screws, bolts ... and similar articles, of iron or steel: Threaded articles: Studs: Other. The rate of duty is 1.9 percent ad valorem.

The provision applicable to the item 2 "spacer" will be subheading 7318.22.0000, HTS, which provides for Screws, bolts ... and similar articles, of iron or steel: Non-threaded articles: Other washers. The rate of duty is free.

The provision applicable to the item 3 "fastener" will be subheading 7318.16.0085, HTS, which provides for Screws, bolts ... and similar articles, of iron or steel: Threaded articles: Nuts: Other: Other. The rate of duty is 0.1 percent ad valorem.

The provision applicable to the item 4 "fastener for the hatch glass striker" will be subheading 8302.30.3060, HTS, which provides for Other mountings, fittings and similar articles suitable for motor vehicles; and parts thereof: Of iron or steel, of aluminum or of zinc: Other. The rate of duty is 2.4 percent ad valorem.

The provision applicable to the item 5 "Air Dam" will be subheading 8708.29.5060, HTS, which provides for Parts and accessories of motor vehicles of headings 8701 to 8705: Other: Other. The rate of duty is 2.7 percent ad valorem.

This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported.

If you have any questions regarding the ruling, contact National Import Specialist Kathy Campanelli at 212-466-5492.

Sincerely,

Robert B. Swierupski
Chief, Metals & Machinery Branch

Previous Ruling Next Ruling

See also: