United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 1995 HQ Rulings > HQ 957792 - HQ 957977 > HQ 957872

Previous Ruling Next Ruling
HQ 957872





April 24, 1995

CLA-2 R:C:T 957872 ch

CATEGORY: CLASSIFICATION

Daniel J. Gluck, Esq.
Serko & Simon
One World Trade Center
Suite 3371
New York, New York 10048

RE: Country of origin for certain luggage; 19 CFR 12.130.

Dear Mr. Gluck:

This is in response to your letter of March 8, 1995, on behalf of your client, Airway Industries, requesting a country of origin determination for "Infinity Control Track" luggage.

FACTS:

The luggage is identified as #3643026, Up-Right Pullman, measuring 26 inches by 19 inches by 9 inches. You have summarized the production and assembly of the article as follows:

Taiwan Operations

1. 1200D polyester fabric, is woven, dyed, printed, finished and backed with PVC backing material. (Production of the PVC backing material, which is also used to cover the steel frame and inner bottom piece, involves a process of dyeing, extruding, and finishing sheets of polyvinyl chloride);

2. 210D nylon material, used as interlining, is woven, dyed, printed, finished and a PU coating is applied;

3. Mesh fabric, used as internal dividers, is woven, dyed and finished;

4. Webbing, elastic bands and hook and loop fasteners are manufactured (involving weaving, dyeing and finishing);

5. Zippers are manufactured (involves weaving, dyeing, finishing, casting, plating and assembly);

6. PVC "sponge" and "leather," used on handles, etc., are manufactured (involves dyeing, extruding and finishing);

7. Plywood, used in the base, is imported and then cut to length and width;

8. PVC exterior piping is manufactured;

9. PE Board, used on the interior edges, is dyed, extruded and finished;

10. Steel wheels and handle assembly are manufactured;

11. Steel framing is manufactured;

12. Hanger bracket and plastic buckles are manufactured;

13. Plastic studs and interior tube reinforcements are manufactured; and

14. Materials are cut and formed into pieces and the cut pieces are bundled for shipping.

China Operations

1. The steel frame is heat sealed and bent to shape;

2. Accessories are riveted onto patches;

3. The patches, webbing and zippers are sewn onto panels;

4. The front and side panels are assembled and sewn together;

5. The steel frame, handle system and wheels are riveted together;

6. The back panel is attached and sewn; and

7. The merchandise is packaged.

You also state that approximately 6/7 of the costs associated with manufacturing the goods (inclusive of materials and labor) are incurred in Taiwan.

ISSUE:

What is the country of origin for the luggage?

LAW AND ANALYSIS:

Country of origin determinations for textile products are subject to Section 12.130 of the Customs Regulations (19 CFR 12.130). Section 12.130(b) provides that a textile product that is processed in more than one country or territory shall be a product of that country or territory where it last underwent a substantial transformation. A textile product will be considered to have undergone a substantial transformation if it has been transformed by means of substantial manufacturing or processing operations into a new and different article of commerce.

Section 12.130(d) of the Customs Regulations sets forth criteria in determining whether a substantial transformation of a textile product has taken place. This regulation states that these criteria are not exhaustive; one or any combination of criteria may be determinative, and additional factors may be considered.

Section 12.130(d)(1) states that a new and different article of commerce will usually result from a manufacturing or processing operation if there is a change in:

(I) Commercial designation or identity,
(ii) Fundamental character or
(iii) Commercial use.

Section 12.130(d)(2) of the Customs Regulations states that in determining whether merchandise has been subjected to substantial manufacturing or processing operations, the following will be considered:

(I) The physical change in the material or article as a result of the manufacturing or processing operations in each foreign territory or country, or insular possession of the United States.

(ii) The time involved in the manufacturing or processing operations in each foreign territory or country, or insular possession of the United States.

(iii) The complexity of the manufacturing or processing operations in each foreign territory or country, or insular possession of the United States.

(iv) The level or degree of skill and/or technology required in the manufacturing or processing operations in each foreign territory or country, or insular possession of the United States.

(v) The value added to the article or material in each foreign territory or country, or insular possession of the United States, compared to its value when imported into the United States.

Section 12.130(e)(1) sets forth manufacturing or processing operations which will usually constitute a substantial transformation. Section 12.130(e)(2) enumerates instances which will usually not constitute a substantial manufacturing or processing operation. In Treasury Decision (T.D.) 85-38, published in the Federal Register on March 5, 1985, (50 FR 8714), the final rule document which established 19 CFR 12.130, there is a discussion of how the examples and factors enumerated in the regulation are intended to operate:

Examples set forth in 19 CFR 12.130(e) are intended to give guidance to Customs officers and other interested parties. Obviously, the examples represent clear factual situations where the country of origin of the imported merchandise is easily ascertainable. The examples are illustrative of how Customs, given factual situations which fall within those examples, would rule after applying the criteria listed in 12.130(d). Any factual situation not squarely within those examples will be decided by Customs in accordance with the provisions of 12.130(b) and (d).

Section 12.130(e) reads as follows:

Manufacturing or processing operations. (1) An article or material usually will be a product of a particular foreign territory or country, or insular possession of the U.S., when it has undergone prior to importation into the U.S. in that foreign territory or country, or insular possession any of the following:

(I) Dyeing of fabric and printing when accompanied by two or more of the following finishing operations: bleaching, shrinking, fulling, napping, decating, permanent stiffening, weighting, permanent embossing, or moireing;

(ii) Spinning fibers into yarn;

(iii) Weaving, knitting or otherwise forming fabric;

(iv) Cutting of fabric into parts and the assembly of those parts into the completed article; or

(v) Substantial assembly by sewing and/or tailoring of all cut pieces of apparel articles which have been cut from fabric in another foreign territory or country, or insular possession, into a completed garment (e.g. the complete assembly and tailoring of all cut pieces of suit-type jackets, suits and shirts).

(2) An article or material usually will not be considered to be a product of a particular foreign territory or country, or insular possession of the U.S. by virtue of merely having undergone any of the following:

(I) Simple combining operations, labeling, pressing, cleaning or dry cleaning, or packaging operations, or any combination thereof;

(ii) Cutting to length or width and hemming or overlocking fabrics which are readily identifiable as being intended for a particular commercial use;

(iii) Trimming and/or joining together by sewing, looping, linking, or other means of attaching otherwise completed knit-to-shape component parts produced in a single country, even when accompanied by other processes (e.g. washing, drying, mending, etc.) normally incident to the assembly process;

(iv) One or more finishing operations on yarns, fabrics, or other textile articles, such as showerproofing, superwashing, bleaching, decating, fulling, shrinking, mercerizing, or similar operations; or

(v) Dyeing and/or printing of fabrics or yarns.

(Emphasis added).

In this instance, the materials comprising the finished article have been manufactured and cut to specific size in Taiwan. The issue presented is whether the assembly and packing of these components constitute a substantial transformation. In prior ruling letters in this area, we have determined that such processing does not constitute a substantial transformation. See Headquarters Ruling Letter (HRL) 956377, dated August 9, 1994 (Suitcases comprised of components manufactured, cut and partially assembled in Taiwan, further assembled by gluing, sewing, riveting, heat sealing and bending a frame to shape in China, are goods originating in Taiwan); HRL 956428, dated May 26, 1994 (Textile pouches manufactured from fabric and components produced and die cut in Taiwan, assembled in China by sewing, are products of Taiwan); HRL 955799, dated April 28, 1994 (Knapsacks, pouches and carry-alls manufactured and cut in Taiwan, assembled by sewing in China, are products of Taiwan); HRL 955666, dated April 19, 1994 (Golf bags, photo/video bags, computer bags, compact disc cases, backpacks composed of fabrics and components produced and cut in Korea and the United States, assembled by means of sewing operations in China, are products of Korea); HRL 954225, dated August 30, 1993 (Textile tote bags and luggage manufactured and cut into panels in Taiwan which are assembled in China are goods originating in Taiwan); HRL 952642, dated May 10, 1993, (Sports bags, knapsacks, insulated lunch bags manufactured and cut to size in Taiwan and assembled/packed in China are goods originating in Taiwan); HRL 953065, dated April 9, 1993 (Bicycle bags consisting of components originating and cut to shape in Taiwan, assembled by simple sewing operations in China, are goods originating in Taiwan); HRL 951899, dated October 31, 1992 (Tote bags and luggage with components fabricated and cut to shape in Taiwan, stitched and assembled in China, originate in Taiwan); HRL 088455, dated March 8, 1991 (Nylon backpack comprised of components originating and cut to shape in Taiwan, assembled by simple sewing and packaging operations in Indonesia, are products of Taiwan). Based upon ample precedent, we conclude that the assembly and packaging of the instant luggage in China does not constitute a substantial transformation. Accordingly, the goods are products of Taiwan.

HOLDING:

The country of origin of the subject merchandise is Taiwan. This holding applies only to the specific factual situation and merchandise identified in the ruling request. This position is clearly set forth in section 177.9(b)(1), Customs Regulations (19 CFR 177.9(b)(1)), which states that a ruling letter is issued on the assumption that all the information furnished in connection with the ruling request and incorporated in the ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect. Should it subsequently be determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished this may affect the determination of country of origin. Accordingly, it is recommended that a new ruling request be submitted in accordance with section 177.2, Customs Regulations (19 CFR 177.2).

Sincerely,

John Durant, Director
Commercial Rulings Division

Previous Ruling Next Ruling