United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 1993 HQ Rulings > HQ 0952904 - HQ 0952997 > HQ 0952988

Previous Ruling Next Ruling



HQ 952988


February 4, 1993

CLA-2 CO:R:C:M 952988 EJD

CATEGORY: CLASSIFICATION

TARIFF NO: 8211.93.00

Mr. Ed Baker
A.N. Deringer, Inc.
30 West Service Road
Champlain, New York 12919-9703

RE: Cutter; Utility knife; plastic cutter; professional cutter; multi-purpose cutter; spare blades; EN 82.11; subheading 8211.94.50

Dear Mr. Baker:

This is in response to your letter of October 9, 1992, to Customs in Champlain, New York, on behalf of Olfa Products Corp., concerning the classification of various cutters described as utility knives, plastic cutters, professional cutters, and multi- purpose cutters under the Harmonized Tariff Schedule of the United States (HTSUS). Your letter and samples of the articles were forwarded to this office for a response.

FACTS:

The cutters, designated as the Utility Knife Model 300, Plastic Cutter Model P-800, Professional Cutter Model "A", and Multi Purpose Cutter Model 180, are made in Japan. All cutters are blister packed on a card.

The Utility Knife Model 300 consists of a plastic handle with a steel blade slider. A scored blade strip is held inside a groove in the handle and can be pushed out or retracted by means of the blade slide. It has a dull blade snapper section which can be used to break off a dull blade at the scored line making a fresh blade available for use. The blister package includes two spare blades wrapped in aluminum foil separate from the cutter.

The Plastic Cutter Model P-800 consists of a plastic handle and a steel blade with a cutting edge and notch at each end. The blade is secured in the handle with a screw through the notch. The cutter has two spare blades in the handle.

The Professional Cutter Model "A" consists of a plastic handle with a steel blade slider. A scored blade strip is held inside a grove in the handle and can be pushed out or retracted by means of the blade slide. It has a dull blade snapper section which can be used to break off a dull blade at the scored line making a fresh blade available for use. It has a removable blade snapper device in the handle. The blister package includes two spare blades wrapped in aluminum foil separate from the cutter.

The Multi Purpose Cutter Model 180 consists of a plastic handle with a steel blade slider. A scored blade strip is held inside a groove in the handle which can be pushed out or retracted by means of the blade slide. It has a dull blade snapper section which can be used to break off a dull blade at the scored line making a fresh blade available for use. It has a removable blade snapper device in the handle. The blister package includes two spare blades wrapped in aluminum foil separate from the cutter.

ISSUE:

Are the replacement blades, which are identical, considered to be "interchangeable"? Are the blades to be classified with the knives, separately, or, are the knives and blades a set?

LAW AND ANALYSIS:

Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs). GRI 1 states in part that for legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes, and provided the headings or notes do not require otherwise, according to GRIs 2 through 6.

The Harmonized Commodity Description and Coding System (HCDCS) Explanatory Notes (ENs) constitute the Customs Cooperation Council's official interpretation of the Harmonized System. While not legally binding on the contracting parties, and therefore not dispositive, the ENs provide a commentary on the scope of each heading of the Harmonized System and are thus useful in ascertaining the classification of merchandise under the System. Customs believes the notes should always be consulted. See T.D. 89-80.

EN 82.11 states, in pertinent part, at page 1113, that:

This heading covers knives with cutting blades, serrated or not, with the exception of those included in heading 82.08, and of certain tools and tableware sometimes called "knives" . . . .

The heading covers:

(4) Knives with several interchangeable blades, whether or not these are contained in the handles. (Emphasis in the original.)

The term "interchangeable" is not defined in the HTSUS or the ENs. Webster's II New Riverside University Dictionary (1988), defines:

Interchangeable - Capable of mutual exchange,

Interchange - 1. To switch each of (two things) into the place of the other. 2. to give mutually: exchange. . . . to change places with each other . . . ."

Webster's Third New International Dictionary (Unabridged) (1966), defines:

Interchangeable - 1. Capable of being interchanged. 2. mutual, reciprocal. . . . 5. permitting mutual substitution without loss of function or suitability. . . .

Interchange - 1. An act of changing each for the other or one for another: exchange. . . .

The Compact Edition of the Oxford English Dictionary (1971), defines:

Interchangeable - 1. Given, done, caused or exhibited by each side to the other; mutual, reciprocal. 2.b. of one thing: subject to change from one condition, state, etc. to another; changeable. 3. of two things: Capable of being put or used in the place of each other; admitting an exchange of place or function. Also, of one thing: that may change places with some other thing. . . .

It is our position based upon the above cited lexicographic authorities that the term "interchangeable blades" refers to the subject spare blades, whether they are contained in the handle of the cutters or packed separately in the blister pack. The word "interchangeable" does not imply that the blades are to be of different types.

Based upon the foregoing definitions and ENs, these cutters and the spare blades are classified under subheading 8211.93.00, HTSUS, which provides for:

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof . . . [o]ther . . . [k]nives having other than fixed blades, and parts thereof (except blades).

HOLDING:

The Utility Knife Model 300, Plastic Cutter Model P-800, Professional Cutter Model "A", Multi Purpose Cutter Model 180 and spare blades are classified in subheading 8211.93.00, HTSUS, with the rate of duty of 3 cents each plus 5.4 percent ad valorem.

Sincerely,

John Durant, Director

Previous Ruling Next Ruling

See also: