What do i make a bass box out of and do i need to make it...

<< Back to: Rec.music.makers.bass Frequently Asked Questions (FAQ) part 1/2

FAQS.ORG makes no guarantees as to the accuracy of the posts. Each post is the personal opinion of the poster. These posts are not intended to substitute for medical, tax, legal, investment, accounting, or other professional advice. FAQS.ORG does not endorse any opinion or any product or service mentioned mentioned in these posts.

<< Back to: Rec.music.makers.bass Frequently Asked Questions (FAQ) part 1/2

[ Home | FAQ-Related Q&As | General Q&As | Answered Questions ]

Question by matthew mercer
Submitted on 3/26/2004
Related FAQ: Rec.music.makers.bass Frequently Asked Questions (FAQ) part 1/2
Rating:	Rate this question:
What do i make a bass box out of and do i need to make it sound proof???

Answer by ganja man b-line addict
Submitted on 9/20/2004
Rating: Not yet rated	Rate this answer:
if i insert a sub-woofer speaker in to a box, does it become a bass box

Answer by jpsl
Submitted on 1/17/2005
Rating: Not yet rated	Rate this answer:
Hi you will need 1 big sheet of mdf some screws a jigsaw a sander some wood glue a measuring tape a box connector and some carpt to cover it when you have finished. all you do is depending on the size of the sub is cut out six sheets exatly the same size roghly 3" bigger than a sub so if ur using a 15" sub cut the sheets 19" x 19" square then cut out the sub hole and the port holes glue and screw together in to a box then carpet it what ever colour u want put the connector box on put the port hole covers on and there you have it but bare in mind this is a basic bassbox with practice you can build any install have fun

Answer by the rasmus rock
Submitted on 3/9/2005
Rating: Not yet rated	Rate this answer:
a pickled egg

Answer by momo
Submitted on 5/4/2005
Rating: Not yet rated	Rate this answer:
the ideal material needed to make a bass box is MDF which yo can get at B&Q or any diy store but it should be at least a cm wide.it has to be well fitted together but does not have to be sound proof as it will sound muffled and will be a waste.

Answer by asa11
Submitted on 11/24/2005
Rating: Not yet rated	Rate this answer:
Interesting question

Answer by vbxcvbxcvb
Submitted on 12/29/2005
Rating: Not yet rated	Rate this answer:
sfhgdfghdfg dfgh dfgh dfgh dfg h

Answer by tucker
Submitted on 3/23/2006
Rating: Not yet rated	Rate this answer:
have you got a brochure to send out to me

Answer by nikola
Submitted on 6/8/2006
Rating: Not yet rated	Rate this answer:
i like to know for dimensions (construction)of the bass box (woofer box)

Answer by blackstallion
Submitted on 11/21/2006
Rating: Not yet rated	Rate this answer:
I assume you are talking about a subwoofer enclosure, if so, MDF material is known to be the best and most practical for bass boxes. Regarding your latter issue, you need to know that there are three different subwoofer enclosures (to my knowledge atleast): 1- Bandbass 2- Ported 3- Sealed Each have different characteristics and produce different sound (frequency). If you need deep bass, I would go for a sealed one, but it must be designed accurately for its dimensions and internal volume which affects the bass. Please note that my answer is a very general oversimplified one. There are many factors in designing the box. Thank you.

Answer by gray
Submitted on 5/11/2007
Rating: Not yet rated	Rate this answer:
hou do i mack a bass box

Your name or nickname:
If you'd like to create a new account or access your existing account, put in your password here:
Your answer: