Top Document: SGI admin Frequently Asked Questions (FAQ) Previous Document: -106- Can I log out users automatically? See reader questions & answers on this topic! - Help others by sharing your knowledge Date: 14 Oct 1995 00:00:01 EST To change a kernel variable under IRIX 5.x, use systune(1M). It saves the tuned kernel in /unix.install; if this file exists, it is moved to /unix on the next reboot. systune will change the parameters in the running kernel if it can, and tell you to reboot if it can't. To actually rebuild the kernel, use 'autoconfig -f'. This leaves the rebuilt kernel in /unix.install. You must reboot to begin using the rebuilt kernel; "rebuild your kernel" elsewhere in the FAQs implies rebooting. IRIX 4.0.x does not have systune. To change a kernel variable, edit the file in /usr/sysgen/master.d which contains the variable, rebuild the kernel and reboot. ------------------------------ End of sgi/faq/admin Digest ****************************** -- The SGI FAQ group <sgi-faq@viz.tamu.edu> http://www-viz.tamu.edu/~sgi-faq/ Finger us for info on the SGI FAQs, or look in ftp://viz.tamu.edu/pub/sgi/. User Contributions:Top Document: SGI admin Frequently Asked Questions (FAQ) Previous Document: -106- Can I log out users automatically? Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: sgi-faq@viz.tamu.edu (The SGI FAQ group)
Last Update March 27 2014 @ 02:12 PM
|
Comment about this article, ask questions, or add new information about this topic: