Top Document: SGI performer Frequently Asked Questions (FAQ) Previous Document: -73- 1.2 libpf APPCULLDRAW does not honor LIMIT/FLOAT/LOCK phases Next Document: -75- 1.2 libpf pfDataPool warning on exit See reader questions & answers on this topic! - Help others by sharing your knowledge When running in the PFMP_CULLoDRAW multiprocessing mode, changing the phase from PFPHASE_LOCK or PFPHASE_FLOAT to PFPHASE_FREE_RUN or PFPHASE_LIMIT can cause the application to deadlock. In perfly, rapidly toggling the phase when running with the PFMP_CULLoDRAW multiprocessing model ("perfly -m 65540" or "perfly -m 65542") can cause the application to hang. Workaround: toggle only once every few frames or not at all. User Contributions:Top Document: SGI performer Frequently Asked Questions (FAQ) Previous Document: -73- 1.2 libpf APPCULLDRAW does not honor LIMIT/FLOAT/LOCK phases Next Document: -75- 1.2 libpf pfDataPool warning on exit Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: sgi-faq@viz.tamu.edu (The SGI FAQ group)
Last Update March 27 2014 @ 02:12 PM
|
Comment about this article, ask questions, or add new information about this topic: