Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI performer Frequently Asked Questions (FAQ)
Section - -71- 1.2 libpf Bug Limit Phase

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Airports ]


Top Document: SGI performer Frequently Asked Questions (FAQ)
Previous Document: -70- 1.2 libpf Multiple EarthSky fog
Next Document: -72- 1.2 libpr Highlighting when using wireframe
See reader questions & answers on this topic! - Help others by sharing your knowledge

  The PFPHASE_LIMIT mode of pfPhase only works when the draw stage is
  configured as a separate process.  For example, the PFMP_APP_CULLDRAW
  mode to pfMultiprocess specifies that the cull and draw stages are
  combined into a single process and so will not be affected by a LIMIT
  phase.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: SGI performer Frequently Asked Questions (FAQ)
Previous Document: -70- 1.2 libpf Multiple EarthSky fog
Next Document: -72- 1.2 libpr Highlighting when using wireframe

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)




Last Update March 27 2014 @ 02:12 PM