Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI hardware Frequently Asked Questions (FAQ)
Section - -27- How can I set my Indy to use 1280x1024 pixels on a third-party monitor?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Houses ]


Top Document: SGI hardware Frequently Asked Questions (FAQ)
Previous Document: -26- What video formats, scan rate, etc. do SGI monitors support?
Next Document: -28- What is the pinout for the Indy's 13W3 video connector?
See reader questions & answers on this topic! - Help others by sharing your knowledge
Date: 19 May 1994 00:00:01 EST

  As root, do 'nvram monitor h' and reboot. See 'man 2 sgikopt' for
  details.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: SGI hardware Frequently Asked Questions (FAQ)
Previous Document: -26- What video formats, scan rate, etc. do SGI monitors support?
Next Document: -28- What is the pinout for the Indy's 13W3 video connector?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)




Last Update March 27 2014 @ 02:12 PM