Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 3 of 5 [Technical FAQs]
Section - T.27 How does one make Caller ID (CID/CND) work correctly?

( Part1 - Part2 - Part3 - Part4 - Part5 - Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Restaurant inspections ]


Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 3 of 5 [Technical FAQs]
Previous Document: T.26 Why is there a slight hissing sound from the speaker?
Next Document: T.27A What exactly is the hardware modification needed for CID/CND and EDR?
See reader questions & answers on this topic! - Help others by sharing your knowledge
--------------------------------------------------------------------------------

Caller ID or Caller Number Delivery is a *paid* service that *may* be available 
from the local phone company.  One can *subscribe* to this service and get a 
ZyXEL modem to display the time, name and phone number of the calling party.

To enable Caller ID detection by the ZyXEL, type in "ATS40.2=1" in a terminal
program.  This procedure was paraphrased from pages 12-5 and 12-6 of the ZyXEL
User's Manual (Revision 2.1).  [pages 12-3 and 12-4 in the on-line version]  
It should enable Caller ID detection.

Should the above procedure be unsuccessful, then a hardware modification might
be necessary. (c.f. T.26A)


User Contributions:

Comment about this article, ask questions, or add new information about this topic:




Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 3 of 5 [Technical FAQs]
Previous Document: T.26 Why is there a slight hissing sound from the speaker?
Next Document: T.27A What exactly is the hardware modification needed for CID/CND and EDR?

Part1 - Part2 - Part3 - Part4 - Part5 - Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
rwong@direct.ca (Robert Wong Jr.)





Last Update March 27 2014 @ 02:11 PM