Top Document: comp.sys.hp.hpux FAQ Previous Document: 5.12.1 General Software Management Next Document: 5.12.1.2 How can I tell what products have been loaded on my system? See reader questions & answers on this topic! - Help others by sharing your knowledge Updated: 03/30/01 HP Software Distributor, also known as SD-UX, is used to install, update, remove, and package software on HP-UX 10.0 and later. SD-UX is often informally shortened to just SD (even though there is also an unbundled HP OpenView product called SD-OV that offers enhancements over SD-UX). All HP-UX 10.x and 11.x software is shipped on media compatible with SD. SD offers three user interfaces: 1. An interactive graphical user interface available for the swinstall, swcopy, and swremove commands. 2. An interactive user interface suitable for ASCII terminals (on S800) for the swinstall, swcopy, and swremove commands. 3. A non-interactive command-line user interface for all commands. The SD-UX manual ("Managing HP-UX Software With SD-UX") is available online: o for 11.11: <http://docs.hp.com/en/B2355-90754/> o for 11.00: <http://docs.hp.com/en/B2355-90154/> o for 10.xx: <http://docs.hp.com/en/B2355-90127/> There are also several excellent whitepapers available on SD-UX's patch-related features: For 11.x: o <http://docs.hp.com/en/oshpux11.0.html#Patch%20Management> For 10.x: o <http://docs.hp.com/en/oshpux10.x.html#Patch%20Management> For additional information on SD commands and features, see the SD manual pages (start with sd(5)) and the SD GUI's online help. User Contributions:Top Document: comp.sys.hp.hpux FAQ Previous Document: 5.12.1 General Software Management Next Document: 5.12.1.2 How can I tell what products have been loaded on my system? Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: hpux.faq@gmail.com
Last Update March 27 2014 @ 02:11 PM
|
Comment about this article, ask questions, or add new information about this topic: